人骨骼中~(228)Th、~(230)Th和~(232)Th含量的同时测定

本文介绍了用α谱仪同时测定人骨骼中~(228)Th、~(230)Th和~(232)Th含量的方法。样品用浓 HNO_3和 H_2O_3湿灰化,草酸钙共沉淀载带、CL-5208萃淋树脂和743阳离子交换树脂联合分离后,电沉积制源,在低温半导体α谱仪上测量。该方法对~(234)Th的全程回收率为95.0±1.7%,对铀和镭的去污系数分别为6.3×10~4和1.5×10~3,对~(228)Th、~(230)Th、~(232)Th 的探测下限分别为0.432、0.135和0.108Bq/kg(鲜重)。     

放射性同位素X荧光测井技术的研究

对放射性同位素源Ｘ荧光测井技术的井液效应，井壁不平度效应和基体效应分别提出了实用的校正技术。野外锶矿Ｘ荧光测井试验表明：Ｘ荧光测井确定的锶矿层厚度和平均品位与传统的岩芯化学分析结果相比较，其相对误差〈１０％，符合锶矿储量计算要求；Ｘ荧光测井可在井场实时提供测井结果，而耗时却短得多。     

195keV Ar^＋辐照非晶态合金表面损伤形貌的研究

用扫描电子显微镜观测研究了室温下１９５ｋｅＶＡｒ＋辐照非晶态合金Ｃｏ（６０）Ｆｅ（１２）Ｎｉ（１０）Ｓｉ６Ｂ（１２）和Ｆｅ（３９）Ｎｉ（３９）Ｖ２Ｓｉ（１２）Ｂ８在各剂量阶段的表面损伤形貌。结果表明，表面损伤是发泡和溅射相互竞争的过程。低剂量下，表面损伤以发泡为主；而在高剂量时，表面发泡消失，溅射造成的多孔粗糙表面损伤结构形成。对高剂量时表面发泡消失的可能机制作了探讨。     

A method for solving the buckling problem of a thin-walled shell

A weighted solution for the critical load of a cylindrical shell is presented. To determine the weights, some special known results are applied. The method can be used to solve generally complicated buckling problems by making use of the solutions of special simple problems. Lastly, some numerical solutions for the same problem are obtained by finite elements. Comparison between the solution method in this paper, the finite element solution and cited results in the literature, shows that the weighted solution has good precision.     

Optimizing the overall configuration of a He-cooled W-alloy divertor for a power plant

A number of different He-cooled divertor configurations have been proposed for magnetic fusion energy (MFE) power plant application. They range in scale from a plate configuration with characteristic dimension of the order of 1 m, to the ARIES-CS T-tube configuration with characteristic dimension of the order of 10 cm, to the EU FZK finger concept with characteristic dimension of the order of 1.5 cm. All these designs utilize tungsten or tungsten alloy as structural material. This paper considers the characteristics of the different divertor configurations and proposes the possibility of optimizing the design by combining different configurations in an integrated design based on the anticipated divertor heat flux profile.     

Surface area, pore size distribution and microstructure of combustion engine deposits

The structural characteristics of combustion engine deposits produced from fuels with 22–44% aromatics by volume have been studied using Raman spectroscopy and gas sorption techniques. The lateral sizes of graphitic crystallites were found to increase slightly with the aromatic content of the fuel used. The surface areas of the deposits were evaluated using the BET and DR theories. Density functional theory (DFT) and mercury porosimetry were used to evaluate pore size distributions. The deposits have large internal surface areas (in the approximate range 100–300 m²/g) and their structures are highly porous. The average pore sizes of the largely microporous deposits do not depend on the aromatic content of the precursor fuel. Walls of pores with widths of about 0.5 nm are primarily responsible for the majority of the internal surface area found in the deposits. Heat treatment at temperatures above 573 K results in increased surface areas because the release of small hydrocarbon fragments from the deposits opens pores which were not accessible following heat treatment at lower temperatures.     

Cycle time predictions for the rotational molding process with and without mold/part separation

We present a detailed theoretical heat transfer model for the entire rotational molding process (including heating and cooling stages) and identify the key dimensionless groups affecting the process cycle time. This theoretical model is employed to generate numerical results that are in very good agreement with the experimental data available in the literature. The effects of variations in the dimensionless groups on the cycle time are evaluated. In addition, part shrinkage has been incorporated in the models, and its effect on the process cycle time has been studied extensively.     

Influence of Sampling and Storage Protocol on Fractal Morphology of Soot Studied by Transmission Electron Microscopy

The aim of this work was to compare the fractal characteristics, D_f and k_f, the primary particle diameter, D_pp, the gyration diameter of aggregates, D_g, and the overlap coefficient, C_ov, of carbon nanoparticle aggregates produced by an ethylene diffusion flame and sampled by means of four commonly used techniques. The first method involves a thermophoretic piston probe (TPP) which inserts a TEM grid into the flame. Three other methods were applied at the outlet of a dilution device, also inserted in the flame. The first of these used a nuclepore filtration sampler (NFS), and is based on filtration of particles onto a polycarbonate membrane. The second, post dilution method, the insertion particle sampler (IPS), inserts a TEM grid, perpendicular to the aerosol flow. Similar to TPP, the last method is a thermophoretic particle sampler (TPS) sampling directly onto a TEM grid. After collection, the samples are stored in the dark either, (1) in a nitrogen filled cell at low humidity or, (2) in ambient air for studying atmospheric ageing. Good agreement was observed between TPP, TPS, and IPS indicating that the dilution induced for TPS and IPS does not significantly change the morphology of soot. On the other hand, the NFS protocol tended to overestimate the overlap coefficient and the size of primary particles and aggregates. Finally, with regard to the aging effect, we found that k_f and D_pp evolve slowly during storage in the atmosphere while D_f, was insensitive to the storage conditions. However, the overlap coefficient increased and the gyration diameter decreased as a function of storage duration, while storage under nitrogen tended to reduce these changes.     

High-temperature elasticity of fibrous ceramics with a bird's nest structure

New fibrous ceramics with polycrystalline mullite fibers as the matrix and silica–boron sols as the high temperature binder, which was inspired by the bird's nest structure in nature, were synthesized. The most important structure characteristic of this fibrous material is that the silica–boron binder only fixed the fibers at the crossing points rather than filled the pores among the fibers. The elastic behavior was investigated, both at room temperature and elevated temperature. Compared to conventional ceramic matrix composites, the samples show a much higher degree of elasticity because of the bending of the fibers. The rebound resilience decreased slowly with the increase of the temperature, but it still remained 86% of that at ambient temperature at 1000 °C. The sample exhibits good elasticity performance, relatively high strength (2.25 MPa) and high porosity (83%) indicating it is a potential high-temperature seal material.     

Rippled and Helical MoS<Subscript>2</Subscript> Nanowire Catalysts: An Aberration Corrected STEM Study

Abstract  

Aberration corrected (C_s) scanning transmission electron microscopy (STEM) has been used for the first time to characterize MoS₂ catalysts (supported on Al₂O₃ substrates) to provide detailed information of its shape and structure. The high-resolution imaging reveals unprecedented morphologies present in the MoS₂ catalyst that have never been observed before with other experimental techniques because of the insufficient image contrast and/or resolution. High angle annular dark field (HAADF)-STEM images shows very clearly that the catalyst is formed by elongated chains with a twisted and helical structure. Based on the HAADF-STEM images, we built three atomic models to illustrate the different morphologies found in the MoS₂ catalyst. The existence of these nanostructures opens the posibility for novel catalyticaly active edge morphologies in MoS₂-based nanocatalysts.