Stability and control of nonlinear systems described by retarded functional equations: a review of recent results

This paper reports on recent results in a series of the work of the authors on the stability and nonlinear control for general dynamical systems described by retarded functional differential and difference equations. Both internal and external stability properties are studied. The corresponding Lyapunov and Razuminkhin characterizations for input-to-state and input-to-output stabilities are proposed. Necessary and sufficient Lyapunov-like conditions are derived for robust nonlinear stabilization. In particular, an explicit controller design procedure is developed for a new class of nonlinear time-delay systems. Lastly, sufficient assumptions, including a small-gain condition, are presented for guaranteeing the input-to-output stability of coupled systems comprised of retarded functional differential and difference equations.     

Polarization discrimination between repeater false-target and radar target

High fidelity repeater false-target badly affects a radar system’s detecting, tracking, and data processing. It is an available approach of confronting false-target for radar that discriminates firstly and then eliminates. Whereas for the technique progress about the repeater false-target jam, it is more and more difficult to discriminate this jam in the time-domain, frequency-domain, or space-domain. The technique using polarization information to discriminate the target and false-target is discussed in th...     

Optimal hole shape for minimum stress concentration using parameterized geometry models

The goal of this work is to obtain optimal hole shape for minimum stress concentration in two-dimensional finite plates using parameterized geometry models. The boundary shape for a hole is described by two families of smooth curves: one is a “generalized circular” function with powers as two parameters; the other one is a “generalized elliptic” function a and b are ellipse axes) with powers as two parameters and one of the ellipse axes as the third parameter. Special attention is devoted to the practicability of parameterized equations and the corresponding optimal results under the condition with and without the curvature radius constraint. A number of cases were examined to test the effectiveness of the parameterized equations. The numerical examples show that extremely good results can be obtained under the conditions with and without curvature radius constraint, as compared to the known solutions in the literature. The geometries of the optimized holes are presented in a form of compact parametric functions, which are suitable for use and test by designers. It is anticipated that the implementation of the suggested parameterized equations would lead to considerable improvements in optimizing hole shape with high quality.     

Adaptive sorting: an information theoretic perspective

We present two algorithms that are near optimal with respect to the number of inversions present in the input. One of the algorithms is a variation of insertion sort, and the other is a variation of merge sort. The number of comparisons performed by our algorithms, on an input sequence of length n that has I inversions, is at most . Moreover, both algorithms have implementations that run in time . All previously published algorithms require at least comparisons for some c > 1. M. L. Fredman was supported in part by NSF grant CCR-9732689.     

A Comparative Investigation of Optical and Structural Properties of Cu-Doped CdO-Derived Nanostructures

In this report, we studied various structural and optical properties of pure and copper-doped cadmium oxide (CdO) thin films. Nanostructured Cu-doped CdO films were deposited using sol–gel spin-coating technique. The structural and morphological changes have been observed by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM) studies. The optical and electrical properties of the pure and Cu-doped CdO thin films were studied by UV–vis spectroscopy and four-point probe method, respectively. The XRD peaks show the formation of nanocrystalline CdO with cubic face-centered crystal structure. The band gaps of the as deposited films were found in the range of 2.32–2.73 eV, while after doping, it decreases due to structural deformation. The electrical resitivity was found to decrease approximately ～10 in Cu-doped CdO thin films.     

Effect of Sintering Temperature on Magnetic and Electrical Properties of GdBaCo<Subscript>2</Subscript><Emphasis Type="Italic">O</Emphasis><Subscript>5 + <Emphasis Type="Italic">δ</Emphasis></Subscript>

In this study, we report the results of an investigation into the sintering temperature dependence of magnetic and transport properties for GdBaCo₂ O _{5 + δ} synthesized through a sol-gel method. The lowering of sintering temperature leads to the increase of oxygen content and the reduction of grain size. The increase of oxygen content results in the enhancement of magnetic interactions and the weakening of Coulomb repulsion effect, while the reduction of grain size improves the magnetoresistance effect. Metal-insulator transition accompanied with spin-state transition is observed in all samples.     

The impact of industrial agglomeration on industrial pollutant emission: evidence from China under New Normal

The purpose of this study is to analyze the environmental pollution effects elicited by industrial agglomeration and to devise necessary changes before and after China going into the New Normal, a contemporary phase of less rapid but more sustainable economic development. An empirical model is constructed based on the Copeland–Taylor model, and empirical research is conducted using statistical panel data derived from 285 Chinese cities between 2003 and 2014. To study the relationship between industrial agglomeration and industrial pollutant emission both before and after the ‘New Normal,’ the sample data are divided into two time periods: 2003–2008 and 2009–2014. Estimated results are as follows. First, industrial agglomeration exacerbates industrial pollution levels overall although the negative environmental effect of industrial agglomeration is weakened following China’s entry into the New Normal phase of economy. Second, both the interaction term of industrial agglomeration and foreign direct investment (FDI) and the interaction term of industrial agglomeration and environmental regulation are negatively related to industrial agglomeration. These findings indicate that FDI and environmental regulation can indirectly reduce industrial pollutant emissions by way of industrial agglomeration.     

Greenhouse gases mitigation by CO<Subscript>2</Subscript> reforming of methane to hydrogen-rich syngas using praseodymium oxide supported cobalt catalyst

This study focuses on the potential of hydrogen-rich syngas production by CO₂ reforming of methane over Co/Pr₂O₃ catalyst. The Co/Pr₂O₃ catalyst was synthesized via wet-impregnation method and characterized for physicochemical properties by TGA, XRD, BET, H₂-TPR, FESEM, EDX, and FTIR. The CO₂ reforming of methane over the as-synthesized catalyst was studied in a tubular stainless steel fixed-bed reactor at feed ratio ranged 0.1–1.0, temperature ranged 923–1023 K, and gas hourly space velocity (GHSV) of 30,000 h^?1 under atmospheric pressure condition. The catalyst activity studies showed that the increase in the reaction temperature from 923 to 1023 K and feed ratio from 0.1 to 1.0 resulted in a corresponding increase in the reactant’s conversion and the product’s yields. At 1023 K and feed ratio of 1.0, the activity of the Co/Pr₂O₃ catalyst climaxed with CH₄ and CO₂ conversions of 41.49 and 42.36 %. Moreover, the catalyst activity at 1023 K and feed ratio of 1.0 resulted in the production of H₂ and CO yields of 40.7 and 40.90 %, respectively. The syngas produced was estimated to have H₂:CO ratio of 0.995, making it suitable as chemical building blocks for the production of oxygenated fuel and other value-added chemicals. The used Co/Pr₂O₃ catalyst which was characterized by TPO, XRD, and SEM-EDX show some evidence of carbon formation and deposition on its surface.     

Inverse analysis procedure to determine flow stress and friction data for finite element modeling of machining

This paper describes an inverse procedure to determine the constitutive constants and the friction conditions in the machining processes using Finite Elements (FE) simulations. In general, the FE modeling of machining processes is an effective tool to analyze the materials machinability under different cutting conditions. However, the use of reliable rheological and friction models represents the basis of a correct numerical investigation. The presented inverse procedure was based on the numerical results obtained using a commercial FE code and was developed considering a specific optimization problem, in which the objective functions that have to be minimized is the experimental/numerical error. This problem was performed by a routine developed in a commercial optimization software. In order to verify the goodness and the robustness of the methodology, it was applied on a Super Duplex Stainless Steel (SDSS) and on an Austenitic Stainless Steel (AUSS) orthogonal machining processes. This work, then, was focused on the identification of the Johnson-Cook (JC) coefficients (A,B,C, n and m) and on the calibration of a Coulomb friction model, in the specific cases of the SAF2507 SDSS and of an AISI 316 Based AUSS Alloy (AISI 316 ASBA). The identification phases were performed considering forces and temperatures experimental data, collected in two specific experimental tasks in which different orthogonal cutting tests were carried out under different cutting parameters conditions.     

Monolithically integrated CoP nanowire array: An on/off switch for effective on-demand hydrogen generation via hydrolysis of NaBH<Subscript>4</Subscript> and NH<Subscript>3</Subscript>BH<Subscript>3</Subscript>

The issues of hydrogen generation and storage have hindered the widespread use and commercialization of hydrogen fuel cell vehicles.It is thus highly attractive,but the design and development of highly active non-noble-metal catalysts for on-demand hydrogen release from alkaline NaBH4 solution under mild conditions remains a key challenge.Herein,we describe the use of CoP nanowire array integrated on a Ti mesh (CoP NA/Ti) as a three-dimensional (3D) monolithic catalyst for efficient hydrolytic dehydrogenation of NaBH4 in basic solutions.The CoP NA/Ti works as an on/off switch for on-demand hydrogen generation at a rate of 6,500 mL/(min.g) and a low activation energy of 41 kJ/mol.It is highly robust for repeated usage after recycling,without sacrificing catalytic performance.Remarkably,this catalyst also performs efficiently for the hydrolysis of NH3BH3.