Novel microcontacts in microwave chip carriers developed by UV-LIGA process

Design and development of novel type microcontacts in monolithic microwave integrated circuit (MMIC) chip-carriers to printed circuit board (PCB) assembly are presented in this paper. Several new concepts of microcontacts for packaging solutions of microwave and millimeter-wave MMIC are depicted. Simulation and vector network analyzer (VNA) measurement results for these microcontact transitions are discussed and conclusions for the optimal dimensions are made. Equivalent electrical circuits are extracted from the measured S-parameter data. The results show that the electrical parameters are highly dependent on the transition dimensions and substrate features. These contacts are based on male stud (bump) and female ring concept. When mating each other, there are clips effect and self-alignment features. Finally, the article discusses the technological implementation of the proposed new microcontact stud-ring through a low-cost ultraviolet electroplating, lithography, and molding (UV-LIGA) process.     

Thermo-optical Interactions in Optical Fibres Caused by Axial Heat-flux Propagation

Abstract

Mode distribution changes were observed when fibre cladding was locally heated by a focused c.w. laser. The time-evolution of mode-coupling was experimentally obtained with the help of a linear photodiode array. A simplified theoretical model of fibre axial temperature flow gave a good agreement with experiment.     

Reconciling Electrical Resistance Tomography (ERT) Measurements with a Fluid Mixing Model for Semi‐Batch Operation of a Stirred Vessel

An electrical resistance tomography (ERT) system retrofitted to a 2.3 m³ vessel has been used to image the vessel volume for single feed semi‐batch operation. Images reconstructed from the raw ERT measurements may be represented as time incremented 3‐D iso‐surface representations of the fluid mixing. ERT derived mixing curves have been evaluated against a network of zones (NOZ) mixing model, which is able to compute the time evolving concentration fields. Like the ERT system, the NOZ model is also able to visualise the evolving feed plume and has the power to predict the corresponding time‐wise reaction behaviour in space for a simple A + B → products reaction.     

Enhancing grid security by fine-grained behavioral control and negotiation-based authorization

Nowadays, Grid has become a leading technology in distributed computing. Grid poses a seamless sharing of heterogeneous computational resources belonging to different domains and conducts efficient collaborations between Grid users. The core Grid functionality defines computational services which allocate computational resources and execute applications submitted by Grid users. The vast models of collaborations and openness of Grid system require a secure, scalable, flexible and expressive authorization model to protect these computational services and Grid resources. Most of the existing authorization models for Grid have granularity to manage access to service invocations while behavioral monitoring of applications executed by these services remains a responsibility of a resource provider. The resource provider executes an application under a local account, and acknowledges all permissions granted to this account to the application. Such approach poses serious security threats to breach system functionality since applications submitted by users could be malicious. We propose a flexible and expressive policy-driven credential-based authorization system to protect Grid computational services against a malicious behavior of applications submitted for the execution. We split an authorization process into two levels: a coarse-grained level that manages access to a computational service; and a fine-grained level that monitors the behavior of applications executed by the computational service. Our framework guarantees that users authorized on a coarse-grained level behave as expected on the fine-grained level. Credentials obtained on the coarse-grained level reflect on fine-grained access decisions. The framework defines trust negotiations on coarse-grained level to overcome scalability problem, and preserves privacy of credentials and security policies of, both, Grid users and providers. Our authorization system was implemented to control access to the Globus Computational GRAM service. A comprehensive performance evaluation shows the practical scope of the proposed system.

Interfacial tension of compatibilized blends of LDPE and PA6: the breaking thread method

The interfacial tension of the uncompatibilized and compatibilized blends of low density polyethylene (LDPE) and polyamide 6 (PA6) has been measured by the breaking thread method. Different types of compatibilizer precursors have been used: poly(ethylene-co-acrylic acid) (Escor 5001, by Exxon) having 6 wt% concentration of acrylic acid; an ethylene-acrylic acid zinc ionomer (Iotek 4200); a triblock copolymer with polystyrene end blocks and a rubbery poly(ethylene–butylene mid block (SEBS) (Kraton G 1652); and SEBS-g-MA (Kraton FG 1901X) with 2 wt% maleic anhydride. The compatibilizing efficiency of the different types of the compatibilizer precursors towards the blends has been evaluated quantitatively by the values of the interfacial tension obtained. It has been shown that Iotek and SEBS-g-MA posses the highest compatibilizing efficiency, demonstrated by the strongest decrease of the interfacial tension and the dimension of the droplets of the dispersed phase. Contrary, SEBS almost does not influence the interfacial tension and the size of the particles. Hence, it possesses the lowest compatibilizing activity towards the blends. The compatibilizer Escor displays an activity lower than that of Iotek and SEBS-g-MA, but it is higher than that of SEBS.     

Reduced constants for simple cycle graph separation

 If G is an n vertex maximal planar graph and δ≤1 3, then the vertex set of G can be partitioned into three sets A, B, C such that neither A nor B contains more than (1−δ)n vertices, no edge from G connects a vertex in A to a vertex in B, and C is a cycle in G containing no more than (√2δ+√2−2δ)√n+O(1) vertices. Specifically, when δ=1 3, the separator C is of size (√2/3+√4/3)√n+O(1), which is roughly 1.97√n. The constant 1.97 is an improvement over the best known so far result of Miller 2√2≈2.82. If non-negative weights adding to at most 1 are associated with the vertices of G, then the vertex set of G can be partitioned into three sets A, B, C such that neither A nor B has weight exceeding 1−δ, no edge from G connects a vertex in A to a vertex in B, and C is a simple cycle with no more than 2√n+O(1) vertices. Received: 8 September 1993/11 December 1995     

Nonstandard finite-difference methods for predator–prey models with general functional response

Predator–prey systems with linear and logistic intrinsic growth rate of the prey are analyzed. The models incorporate the mutual interference between predators into the functional response which stabilizes predator–prey interactions in the system. Positive and elementary stable nonstandard (PESN) finite-difference methods, having the same qualitative features as the corresponding continuous predator–prey models, are formulated and analyzed. The proposed numerical techniques are based on a nonlocal modeling of the growth-rate function and a nonstandard discretization of the time derivative. This discretization approach leads to significant qualitative improvements in the behavior of the numerical solution. In addition, it allows for the use of an essentially implicit method for the cost of an explicit method. Applications of the PESN methods to specific predator–prey systems are also presented.     

Virtual angiography for visualization and validation of computational models of aneurysm hemodynamics

It has recently become possible to simulate aneurysmal blood flow dynamics in a patient-specific manner via the coupling of three-dimensional (3-D) X-ray angiography and cmputational fluid dynamics (CFD). Before such image-based CFD models can be used in a predictive capacity, however, it must be shown that they indeed reproduce the in vivo hemodynamic environment. Motivated by the fact that there are currently no techniques for adequately measuring complex blood velocity fields in vivo, in this paper we describe how cine X-ray angiograms may be simulated for the purpose of indirectly validating patient-sperific CFD models. Mimicking the radiological procedure, a virtual angiogram is constructed by first simulating the time-varying injection of contrast agent into a precomputed, patient-specific CFD model. A time-series of images is then constructed by simulating the attenuation of X-rays through the computed 3-D contrast-agent flow dynamics. Virtual angiographic images and residence time maps, here derived from an image-based CFD model of a giant aneurysm, are shown to be in excellent agreement wiith the corresponding clinical images and residence time maps, but only when the interaction between the quasisteady contrast agent injection and the pulsatile flow are properly accounted for. These virtual angiographic techniques pave the way for validating image-based CFD models against routinely available clinical data, and provide a means of visualizing complex, 3-D blood flow dynamics in a clinically relevant manner. They also clearly show how the contrast agent injection perturbs the noraml blood flow patterns, further highlighting the potential utility of image-based CFD as a window into the true aneurysmal hemodynamics.     

New insight into the redox behavior of polyaniline

Polyaniline is one the most promising conducting polymers due to its ability to respond to environmental modifications by change in the properties. Here, we report an unprecedented redox behavior of polyaniline. Namely, propagation of reduction in thin highly organized polyaniline films immersed in acid aqueous medium (see Video 1). The films represent a homogeneous interpenetrating network of nano-sized polyaniline fibrils and water molecules. It is found that the presence of highly hydrated anions like HCOO^? favors both short- and long-range ordering, as well as the propagation of reduction in the polymer.