Mo、Ni含量与Ti(C,N)基金属陶瓷组织和性能之间的关系

本文研究了Mo、Ni含量对Ti（C，N）基金属陶瓷组织和性能的影响．结果表明，Mo、Ni含量对组织和性能有很大影响，化学成分决定了组织和性能．     

油田站外单管集油辅助工艺对比

为了解决部分油井无法单管输送的问题,采用PIPESIM模拟软件对不同含水率、不同集输半径和不同产液量油井的集输管线进行计算分析,同时结合各油田单管集输设计经验,得出中质原油站外系统单管集油工艺改造的技术界限,而对于达不到技术界限的油井,可以通过辅助措施实现单管集油,通过对比电磁加热器、空气源热泵、管道内置电伴热、井口气电加热器、油井保温隔热油管、地热、太阳能光热技术及井口加药等单管辅助措施的原理及工艺特点,最终确定在不同工况条件下的辅助单管集输措施,为油田站外单管集输工艺选择和优化提供了理论依据。     

基于离子液体的乙腈-乙醇-水共沸体系节能分离

乙腈生产过程中产生的乙腈-乙醇-水物系,由于在常压下产生了3种二元共沸物和1种三元共沸物,采取常规精馏无法对物系进行有效分离,因此基于COSMO-SAC理论对具有应用潜力的4种离子液体进行筛选,选定1,3-二甲基咪唑磷酸二甲酯([DMIM][DMP])作为分离乙腈-乙醇-水物系的适宜萃取剂,并利用σ-谱图对离子液体与该物系的作用机理进行分析;采用Aspen Plus软件建立了基于离子液体分离乙腈-乙醇-水物系的萃取精馏流程。以年度总费用(TAC)最低为优化目标,并将CO₂排放成本计入目标函数中进行流程优化。在此基础上,为了更有效节能,进一步设计优化了热泵精馏萃取分离流程。最终热泵精馏流程TAC比常规流程降低16.82%,CO₂排放费用减少了23.35%。     

海上油田多元热流体吞吐气窜调剖实验研究及应用北大核心CSCD

目的多元热流体吞吐技术是海上稠油开发的一种经济、有效的技术,但随着吞吐轮次的增加,暴露出易发生“气窜”的问题,即N_(2)、CO_(2)等非凝析气体容易突破到周边生产井,导致其电泵气锁关井影响生产。方法以渤海NB稠油油田为研究对象,采用可视化实验方法,研究防止气窜的治理策略。结果筛选出适合油田的磺酸基泡沫调堵体系,命名为QGQ-4,优化研究出最佳注入参数为质量分数0.4%、泡沫干度在60%以上、地面预制泡沫注入方式。与单纯多元热流体驱相比,泡沫辅助多元热流体驱可提高油藏波及,有效封堵气窜通道,提高平面波及系数37%。结论研究成果现场应用后,受益井初期高峰日产油增加到措施前的1.5倍,日产油由措施前的50.5 m^(3)增至措施后的高峰日产油75.7 m^(3),取得了较好的增产效果。     

Thermally activated giant piezoelectricity and enhanced interface elastic strain-mediated magnetoelectric coupling

Perovskite materials with compositions in the vicinity of the steep morphotropic phase boundary (MPB) exhibit various intriguing properties including giant piezoelectricity and large dielectric constant. Aside from composition, the phase configuration of the perovskites is also strongly related to the ambient temperature. Here, we report a giant piezoelectricity of 10 980 pm/V at 93°C in the 0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ (PMN-PT) single crystals which is more than five times larger than that at room temperature. The enhanced piezoelectricity can be attributed to the instability of the thermally induced tetragonal phase which can be converted to the orthorhombic phase by the external electric field in the <011> oriented single crystal. The transverse piezoelectricity has been investigated by measuring the electric-field-dependent ferromagnetic resonance (FMR) field in the CoFeB/PMN-PT magnetoelectric (ME) heterostructures. The ME coupling coefficient has been increased from 49.3 to 476 Oe cm/kV as temperature increased from 25 to 90°C. The findings reveal that both longitudinal and transverse piezoelectricity in the PMN-PT single crystals can be greatly enhanced by proper setting of ambient temperature, indicating an effective route for the design of strain-mediated tunable devices with ultralow driving voltage.     

Sintering parameter optimization of Tb3Al5O12 magneto-optical ceramics by vacuum sintering and HIP post-treatment

Transparent terbium aluminum garnet (TAG) ceramics were achieved by the vacuum sintering plus HIP post-treating from the coprecipitated TAG nanoparticles. The influences of vacuum sintering temperature and sintering aid TEOS on the optical quality of the TAG ceramics were studied. The results show that with the increase of sintering temperature, the optical quality of TAG ceramics is improved gradually, and the in-line transmittance of the TAG ceramics treated at 1720°C for 20 hours under vacuum and then HIP post-treated at 1700°C for 3 hours under 200 MPa argon gas is 81.6% at 1064 nm. The sintering additive TEOS can improve the optical quality of TAG ceramics and inhibit the valence state change of Tb³⁺ ions to Tb⁴⁺ during the annealing process. The Verdet constant of the TAG ceramics at 632.8 nm is about −178 rad·T⁻¹·m⁻¹ at room temperature, which is 1.3 times that of the commercial TGG crystals (−134 rad·T⁻¹·m⁻¹).     

Bismuth-activated,narrow-band,cyan garnet phosphor Ca3Y2Ge3O12:Bi3+ for near-ultraviolet-pumped white LED application

Herein, a novel Bi³⁺-activated Ca₃Y₂Ge₃O₁₂ (CYGO) narrow-band cyan-emitting phosphor was synthesized. It can be excited from 320–420 nm, and the strongest excitation peak is located at 370 nm, which is suitable for current near-ultraviolet (NUV) chips perfectly. The full width at half maximum is at 52 nm. By analyzing the crystal structure of the sample, we infer that the Bi³⁺ ions replace the Y³⁺ site to form a highly symmetrical BiO₆ octahedron. The time-resolved photoluminescence (TRPL) spectra of CYGO: Bi³⁺ reveal that the only a single emission center exists in the host lattice. A warm white light–emitting diode (WLED) device with a low correlated color temperature (3148 K) and a high color rendering index (90.2) was fabricated by using the as-prepared sample, and the significant thermal stability of CYGO: Bi³⁺ guarantees its potential application in WLEDs. It is verified that the structure with only one crystallographic Y site for Bi³⁺ dopant occupation and highly symmetrical and dense structure is conducive to realize narrow-band emission, which will provide experience for researchers to explore more Bi³⁺-activated phosphors used for high-end lighting.     

Multiple Venting Behavior of Inner Dust Explosions

Combustion, Explosion, and Shock Waves - Explosion venting experiments of corn starch are carried out in a small-scale container. With the help of a high-speed camera and a pressure sensor, an...     

A novel spherical-ordered macroporous CuO nanocatalyst for the electrochemical reduction of carbon dioxide

Journal of Applied Electrochemistry - The electrocatalytic reduction of CO2 is a promising research direction in resource utilization and sustainable energy development. However, there is still a...     

Effects of thickness and hydrophobicity of double microporous layer on the performance in proton exchange membrane fuel cells

In this paper, a multi-layer gas diffusion layer (GDL) is designed. The GDL consists of a single carbon paper backing layer and dual microporous layers (MPLs). Moreover, the effects of thickness and hydrophobicity of double MPL on the performance of proton exchange membrane fuel cells are investigated. From the test results of the water contact angle, conductivity, pore size distribution, and the polarization curve, it is found that the thickness adjustment increases the number of 0.5 to 7 μm and 20 to 100 μm pores in GDL, which is more conducive to water discharge. Therefore, the thickness adjustment is more favorable to the cell performance under high humidity. While the gradient hydrophobic design makes the MPL of the modified intermediate layer have a certain water-retaining capacity to humidify the reaction gas, which has better effect under low humidity. At last, the results show that the optimized GDL meets a limit power density of 1.772 W/cm² under 60% humidification and 1.600 W/cm² under 100% humidification.