关于彩色火焰蜡烛的研制

本文阐述了利用焰色反应的原理研制彩色火焰蜡烛，着重分析并解决了在研制工作中出现的几个技术关键，如主燃剂的选取、蜡烛成型和强度、发色剂的选择与用量等．     

简易炉外处理在电炉钢生产中的应用

阐述了小电炉采用投资少，见较快，简单易行的炉外处理措施，提高了钢质量和生产率，生产实践和应用结果表明，本措施可为同类型企业的炼钢工艺完善和技术进步提供参考。     

Towards a generalized TLM algorithm for solving arbitraryreciprocal and nonreciprocal planar structures

A generalized transmission line matrix (TLM) algorithm is developed in the frequency domain to tackle arbitrary both reciprocal and nonreciprocal anisotropic waveguiding problems. In particular, the modeling issue for arbitrary planar structures is stressed in this work. A new three-dimensional (3-D) condensed node is used to consider the effect of both electric and magnetic constitutive tensors. Various results indicate how the modal dispersive behavior can be manipulated by changing not only the anisotropic characteristics of the substrate, but also the strip/slot geometry as well as the magnitude and orientation of the applied static magnetic field. The present algorithm is useful for CAD and simulation of a large class of gyrotropic waveguide-based microwave and millimeter-wave circuits     

牙鲆淋巴囊肿病的PCR诊断方法研究

以中国养殖牙鲆 (Paralichthysolivaceus)淋巴囊肿病毒 (Lymphocystisdiseasevirus,LCDVcn)主要衣壳蛋白 (majorcapsidprotein ,MCP)基因的中间保守序列为目标基因 ,设计了一对特异性引物。该引物可扩增出 172bp的病毒DNA片段 ,其最小DNA检出量为 0 0 183ng。用PCR法从人工感染淋巴囊肿病毒 3天的牙鲆血、鳃、肝、脾、肠、胃及自然发病牙鲆的肿瘤中 ,分别检测到了LCDV的存在。本实验结果证明 ,PCR法对于早期检测LCDV是十分有效的。     

助剂对Pd/树脂醚化催化剂催化性能的影响 Ⅰ.铝助剂的影响

研究了不同助剂对Ｐｄ／树脂醚化催化剂在临氢条件下对催化裂化汽油Ｃ５馏份与甲醇和Ｈ２反应的催化性能的影响。结果表明，在Ｐｄ／树脂醚化催化剂中引入Ｚｒ、Ｔｉ、Ｂ、Ｓｎ和Ａｌ等助剂后，都能改善催化剂的醚化、双键异构和二烯烃选择性加氢活性，其中以Ａｌ、Ｓｎ为最好。Ａｌ助剂的体积质量和负载方式对Ｐｄ－Ａｌ／树脂醚化催化剂的活性有影响。ＢＥＴ方法和Ｘ－射线荧光光谱分析（ＸＦＳＡ）表明，Ａｌ助剂对Ｐｄ－Ａｌ／树脂醚化催化剂的表面积、孔结构和Ｐｄ离子交换量影响较小。     

驱动压电陶瓷的高压放大器

概述了高压放大器的基本组成，以及采用高压稳压电源措施，提高高压放大器的性能，并简述了高压放大器输出级的工作原理，给出了过渡保护方法。     

低温粉碎系统中旋风分离器设计

旋风分离器是一种应用离心力进行粉体分离的设备。低温粉碎系统应用它分离粉体并起集粉作用。它的效率决定了物质回收率。本文从离心加速度与重力加速度的比值，筒体的高低，筒体直径，进口速度叙述对分离器效率的影响。着重叙述筒体直径确定方法，以及我们设计造长筒形旋风分离器的具体结构和令人满意的试验结果。     

Transdermal Iontophoretic Delivery of Thyrotropin-Releasing Hormone Across Excised Rabbit Pinna Skin

Enhanced transport of a model peptide drug thyrotropin-releasing hormone (TRH), a tripeptide of molar mass 362 g and a pK_a 6.2, through excised rabbit pinna skin was achieved by means of iontophoresis with continuous current or monophase periodically pulsed current. The resulting flux in the steady state was proportional to the applied current density. In the transdermal iontophoretic delivery of TRH, the pulsed iontophoretic flux exceeded that obtained with a continuous current. At a low ionic strength, an increased degree of protonation in TRH increased the rate of permeation. The flux of TRH in a buffer at pH 4 is greater than that at pH 8 when the ionic strength is 0.1 M. At a greater ionic strength, the trend is reversed. The enhanced flux of unprotonated TRH during transdermal iontophoresis is attributed largely to electro-osmotic volume flow. An increased rate of permeation of TRH crossing the skin is achieved at low ionic strength, moderate pH, and a large duly cycle of current; the frequency of pulsed current had no significant influence on the rate of transdermal iontophoretic delivery of TRH.     

A dislocation shielding prediction of the toughness transition during cleavage of semibrittle crystals

An interconnected set of observations assesses current equilibrium models of the ductile-brittle-transition temperature (DBTT). This involvesin situ transmission electron microscopy (TEM) studies of crack-tip dislocations in single and polycrystals and bulk fracture toughness tests at various temperatures. Beyond K_I values of 8 MPa · m^1/2 in both iron-base single and polycrystals, large numbers of redundant dislocations are created, as postulated recently by Weertman. [38] Still, the necessary shielding dislocations, as required by equilibrium, can be detected at values as high as 20 and 40 MPa · m^1/2 byex situ TEM and electron channeling, respectively. In addition, the close approach of dislocations to the crack tip in some of the studies, as opposed to others, suggests that large dislocation free zones (DFZ) are a thin-film artifact. However, a failure criterion based partly on the Rice-Thomson model’21 is both consistent with the absence of a large DFZ and observed fracture toughness variations with test temperature. It is emphasized that this toughness transition is entirely in the semibrittle regime where cleavage is the failure mode. Nevertheless,K _lc values increase from 3 to 60 MPa·m^1/2 with an increase in test temperature. This article is based on a presentation made in the symposium “Quasi-Brittle Fracture” presented during the TMS fall meeting, Cincinnati, OH, October 21–24, 1991, under the auspices of the TMS Mechanical Metallurgy Committee and the ASM/MSD Flow and Fracture Committee.