Comparison of various methods for the extraction of total lipids,fatty acids,cholesterol, and other sterols from food products

Seven methods were used to compare the efficiency of total lipid extraction from 13 samples of eight different food products. The methyl esters of fatty acids and the butyrate esters of sterols were prepared and analyzed by gas liquid chromatography. On the basis of total lipid recovered and amounts of fatty acids and sterols present, a chloroform: methanol procedure was selected as the most effective method.     

Heterotopic ossification after femoral intramedullary rodding

Heterotopic ossification (HO) after femoral intramedullary rodding is a significant complication of the procedure. One hundred eighteen cases of femoral roddings performed on 113 patients were available for review. The data were computerized and evaluated using univariate analysis and multivariate regression analysis. A statistically significant increase of HO was found with male gender, increased delay to surgery, and in patients requiring prolonged intubation because of their multiple injuries. HO was classified using a modified version of the method of Brumback et al. (grades 0-IV). A strong correlation of HO with brain injury documented by computed tomography scan was also found to be statistically significant for the more severe grades of HO. This group of patients had not previously been identified as being at high risk for HO.     

Rehydration of active dried yeast: impact on strength and stiffness of yeast cells measured using microelectromechanical systems

This study investigated the rehydration of active dried yeast and the impact of temperature and wort density on the strength and stiffness of individual cells using a microelectromechanical system. Dried yeast was rehydrated using a variety of methods, including direct pitching into wort (13.6°P) at 12, 22 and 30°C, as well as propagation using YEPD media (4.2°P). Cell viability was found to broadly correlate with measurement of cell strength and stiffness. Both wort density and temperature affected viability and physical characteristics of the cells after 1 h of rehydration. Yeast cells rehydrated at low temperature and high wort density burst at a lower force (0.26 ± 0.02 μN) than cells rehydrated using high temperature and low density media (0.50 ± 0.10 μN). Cells rehydrated at higher temperatures or using low density media showed no significant difference in strength and stiffness when compared with high viability, actively fermenting yeast. Changes in yeast physiology, owing to stress responses, may contribute to the observed differences in mechanical properties. These findings have application in brewery design, as pumping, centrifugation, storage and associated shear impart mechanical stress upon yeast cells. © 2018 The Institute of Brewing & Distilling     

Runge–Kutta Residual Distribution Schemes

We are concerned with the solution of time-dependent non-linear hyperbolic partial differential equations. We investigate the combination of residual distribution methods with a consistent mass matrix (discretisation in space) and a Runge–Kutta-type time-stepping (discretisation in time). The introduced non-linear blending procedure allows us to retain the explicit character of the time-stepping procedure. The resulting methods are second order accurate provided that both spatial and temporal approximations are. The proposed approach results in a global linear system that has to be solved at each time-step. An efficient way of solving this system is also proposed. To test and validate this new framework, we perform extensive numerical experiments on a wide variety of classical problems. An extensive numerical comparison of our approach with other multi-stage residual distribution schemes is also given.     

Apomyoglobin as a molecular recognition surface: expression, reconstitution and crystallization of recombinant porcine myoglobin in Escherichia coli

Recombinant porcine myoglobin has been produced in Escherichiacoli using the cII fusion expression system of Nagai and Th?gersen[Nature, 309, 810–812 (1984)]. After processing and reconstitutionwith haem, the protein is gel-electrophoretically and spectrophotometricallyindistinguishable from native pig myoglobin. Large crystalsof both native and recombinant porcine myoglobin were grownfrom 50 mM sodium phosphate, pH 7.1, 80% ammonium sulphate.The crystals belong to space group C2 (a = 156.9 ?, b = 42.0?, c = 92.2 ?, ß = 127.9?) and diffract to a nominal2.5 ? resolution. We plan to explore apomyoglobin as a bindingsurface in studies combining site-directed mutagenesis and X-rayanalysis. These experiments will be extended by studying thebinding of haem analogues to the mutant apoproteins.     

Aggregate and concrete microfracture

Thin sections cut from cast concrete cylinders have been examined in transmitted light to investigate the significance of coarse aggregate type in “primary” microfracturing. Concretes manufactured with crushed-rock aggregates and gravel aggregates were studied and, in every case, the dominant fracture type was a parting of the aggregate-matrix bond. Bond cracking was least severe with the marble aggregate where epitaxial calcite over-growth was indicated. The ability of bond cracks to maintain continuity by bridging surface irregularities, via mortar cracks, reduced the inhibiting influence of rough-surfaced aggregate on bond-crack development.     

Effects of an ozone-generating air purifier on indoor secondary particles in three residential dwellings

The use of indoor ozone generators as air purifiers has steadily increased over the past decade. Many ozone generators are marketed to consumers for their ability to eliminate odors and microbial agents and to improve health. In addition to the harmful effects of ozone, recent studies have shown that heterogeneous and homogeneous reactions between ozone and some unsaturated hydrocarbons can be an important source of indoor secondary pollutants, including free radicals, carbonyls, carboxylic acids, and fine particles. Experiments were conducted in one apartment and two detached single-family dwellings in Austin, TX, to assess the effects of an ozone generator on indoor secondary organic aerosol concentrations in actual residential settings. Ozone was generated using a commercial ozone generator marketed as an air purifier, and particle measurements were recorded before, during, and after the release of terpenes from a pine oil-based cleaning product. Particle number concentration, ozone concentration, and air exchange rate were measured during each experiment. Particle number and mass concentrations increased when both terpenes and ozone were present at elevated levels. Experimental results indicate that ozone generators in the presence of terpene sources facilitate the growth of indoor fine particles in residential indoor atmospheres. Human exposure to secondary organic particles can be reduced by minimizing the intentional release of ozone, particularly in the presence of terpene sources. PRACTICAL IMPLICATIONS: Past studies have shown that ozone-initiated indoor chemistry can lead to elevated concentrations of fine particulate matter, but have generally been completed in controlled laboratory environments and office buildings. We explored the effects of an explicit ozone generator marketed as an air purifier on the formation of secondary organic aerosol mass in actual residential indoor settings. Results indicate significant increases in number and mass concentrations for particles <0.7 microns in diameter, particularly when an ozone generator is used in the presence of a terpene source such as a pine oil-based cleaner. These results add evidence to the potentially harmful effects of ozone generation in residential environments.     

Mass spectrometric techniques for label-free high-throughput screening in drug discovery

High-throughput screening (HTS) is an important tool for finding active compounds to initiate medicinal chemistry programs in pharmaceutical discovery research. Traditional HTS methods rely on fluorescent or radiolabeled reagents and/or coupling assays to permit quantitation of enzymatic target inhibition or activation. Mass spectrometry-based high-throughput screening (MS-HTS) is an alternative that is not susceptible to the limitations imposed by labeling and coupling enzymes. MS-HTS offers a selective and sensitive analytical method for unlabeled substrates and products. Furthermore, method development times are reduced without the need to incorporate labels or coupling assays. MS-HTS also permits screening of targets that are difficult or impossible to screen by other techniques. For example, enzymes that are challenging to purify can lead to the nonspecific detection of structurally similar components of the impure enzyme or matrix of membraneous enzymes. The high selectivity of tandem mass spectrometry (MS/MS) enables these screens to proceed with low levels of background noise to sensitively discover interesting hits even with relatively weak activity. In this article, we describe three techniques that we have adapted for large-scale (approximately 175,000 sample) compound library screening, including four-way parallel multiplexed electrospray liquid chromatography tandem mass spectrometry (MUX-LC/MS/MS), four-way parallel staggered gradient liquid chromatography tandem mass spectrometry (LC/MS/MS), and eight-way staggered flow injection MS/MS following 384-well plate solid-phase extraction (SPE). These methods are capable of analyzing a 384-well plate in 37 min, with typical analysis times of less than 2 h. The quality of the MS-HTS approach is demonstrated herein with screening data from two large-scale screens.