Aluminum compounds as additional crosslinkers for air-drying high-solids alkyd paints

Aluminum compounds, especially complexes of alcohols, are known as additional crosslinkers for air-drying alkyd paints. Particularly, the drying behavior of high-solids alkyd systems applied under adverse conditions may be improved distinctly. Besides the ether- and peroxy-crosslinks resulting from oxidative drying, coordinative crosslinking occurs. However, exterior weathering of paint films containing Al-complexes frequently results in severe embrittlement. In order to cope with these problems, drying and aging of alkyds and Al-complexes were investigated. All ligands in the complex appeared to get lost during drying, a probable cause of poor weathering performance. Using specially developed alkyd paints for Al-compounds, possible ways of controlling embrittlement are discussed. P.O. Box 9300, 6800 SB Arnhem, The Netherlands. P.O. Box 3, 2170 BA Sassenheim, The Netherlands.     

Amino‐functionalised mesoporous silica microspheres for immobilisation of Candida antarctica lipase B – application towards greener production of 2,5‐furandicarboxylic acid

In the present study, amino‐functionalised mesoporous silica microspheres were utilised as support for the covalent immobilisation of Candida antarctica lipase B (CaLB) for the subsequent production of 2,5‐furandicarboxylic acid (FDCA) from 2,5‐diformylfuran (DFF). Under the optimised operating conditions of pH 6.5, particle/enzyme ratio of 1.25:1.0 and glutaraldehyde concentration of 4 mM, a maximum CaLB immobilisation yield of 82.4% on silica microspheres was obtained in 12.25 h. The immobilised CaLB was used for the synthesis of alkyl esters, which were utilised along with hydrogen peroxide for FDCA synthesis. The biocatalytic conversion of 30 mM DFF dictated a 77–79% FDCA in 48 h at 30°C; where the turnover number and turnover frequency of immobilised CaLB were 6220.73 mol mol⁻¹ and 129.59 h⁻¹, respectively, for ethyl acetate, against 6297.65 mol mol⁻¹ and 131.2 h⁻¹, respectively, for ethyl butyrate. Upon examining the operational stability, the immobilised CaLB exhibited high stability till five cycles of FDCA production.Inspec keywords: mesoporous materials, organic compounds, biotechnology, silicon compounds, renewable materials, catalysis, catalysts, enzymes, thermal stability, biofuelOther keywords: FDCA production, amino‐functionalised mesoporous silica microspheres, greener production, 2,5‐furandicarboxylic acid, covalent immobilisation, 2,5‐diformylfuran, CaLB immobilisation, Candida antarctica lipase B immobilisation, ethyl butyrate, time 48.0 hour, temperature 30.0 degC, time 12.25 hour     

Dye–fiber interactions in PET fibers: Hydrogen bonding studied by IR‐spectroscopy

Dye–fiber interactions are studied in poly (ethylene terephthalate) fibers by FT‐IR spectroscopy. It is shown for the first time that DRIFTS (diffuse reflectance infrared Fourier transform spectroscopy) serves as an easy applicable and accurate technique for the study of fibrous structures. This article focuses on the possible hydrogen bond interactions in the dye–fiber system, where the PET fibers are dyed with anthraquinone‐based disperse dyes. The dyes and related anthraquinone structures are studied in both the dilute solution state, the solid state, and as present in the PET fibers. It is proven that 1‐amino anthraquinones show strong “chelate‐type” intramolecular hydrogen bonding in all three states. In the fibers an important supplementary intermolecular hydrogen bonding with the C?O groups in the PET fiber is observed. The extend of hydrogen bonding seems to be prone to dye concentration variations. Further analysis by modulated differential scanning calorimetry links the hydrogen bonding to an intrinsic plasticizing effect of the dyes affecting the dye diffusion process. This thus offers a tool for the fundamental understanding of the dyeing process and possible observed differences in dyeing behavior in dye–fiber systems. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Mechanistic study of drying of alkyd resins using (Z,Z)- and (E,E)-3,6-nonadiene as model substances

The cobalt-catalysed autoxidative drying of alkyd resins was studied using (Z,Z)-3,6-nonadiene and (E,E)-3,6-nonadiene as model compounds. A large number of reaction products were isolated from the autoxidation mixture using HPLC and preparative size exclusion chromatography and identified with ¹H- and ¹³C-NMR. The identified compounds comprised C₉ hydroperoxides, endoperoxides, epoxides, aldehydes and ketones and some other oxidation products. Their chemical structures pointed to three different types of oxidation processes taking place. Besides the main radical autoxidation reaction, evidence was found for photo-sensitized oxidation involving singlet oxygen. Thirdly, epoxidation occurs via peracids or hydroperoxides formed as intermediates. Because of the large number of possible isomers having very similar physical properties, isolation of dimers required considerable effort. Nevertheless, two dimers were isolated and characterized. Their structures indicate crosslinking to occur by recombination of radicals as termination reaction.     

The rapid synthesis of nanostructured orthorhombic KNbO3 particles by a microwave-assisted hydrothermal method and their characterization

We studied the molar ratio effects of niobium and potassium precursors on the structure and morphology of potassium niobate powders prepared via microwave-assisted hydrothermal synthesis (MaHS). KNbO₃ nanostructures in the form of nanotowers and nanocubes were obtained at reduced synthesis times (30–240 min). The products were characterized via XRD, Raman spectroscopy, SEM, and TEM; band gap calculations used diffuse reflectance data. The results indicate that KNbO₃ nanostructures were obtained with crystallite sizes ranging from 33 to 52 nm. An orthorhombic crystalline structure was formed from the increase of KOH at a molar ratio Nb₂O₅:KOH (1:8 to 1:16 M). The band-gap of 3.1–3.3 eV has potential use in photodegradation applications.     

Novel BQCA- and TBPB-Derived M1 Receptor Hybrid Ligands: Orthosteric Carbachol Differentially Regulates Partial Agonism

Recently, investigations of the complex mechanisms of allostery have led to a deeper understanding of G protein-coupled receptor (GPCR) activation and signaling processes. In this context, muscarinic acetylcholine receptors (mAChRs) are highly relevant due to their exemplary role in the study of allosteric modulation. In this work, we compare and discuss two sets of putatively dualsteric ligands, which were designed to connect carbachol to different types of allosteric ligands. We chose derivatives of TBPB [1-(1′-(2-tolyl)-1,4′-bipiperidin-4-yl)-1H-benzo[d]imidazol-2(3H)-one] as M₁-selective putative bitopic ligands, and derivatives of benzyl quinolone carboxylic acid (BQCA) as an M₁ positive allosteric modulator, varying the distance between the allosteric and orthosteric building blocks. Luciferase protein complementation assays demonstrated that linker length must be carefully chosen to yield either agonist or antagonist behavior. These findings may help to design biased signaling and/or different extents of efficacy.     

Undular Tidal Bores: Basic Theory and Free-Surface Characteristics

The present study examines the free-surface properties of undular tidal bores observed for 1相似文献   

Review of Drogues et dependances and Toxicomanies.

Reviews the books, Drogues et dépendances by Jef-Louis Bonnardeaux (1983) and Toxicomanies by Dollard Cormier (1983. The book by Bonnardeaux is clearly written and is accompanied by illustrations. However, one doubts the utility of the representation of many biochemical formulas. One wishes also for a better structuring of the various chapters. The book by Cormier is an excellent complement to the Bonnardeaux book. Drug addiction is presented as a life style expressing a solution to problems of existence. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Quantitative phase evaluation of converter slags

The slags formed in the LD vessel during the refining process turn out with different chemical compositions, mineralogical structures and physical properties, in dependence on the charging and processing conditions. Electron probe microanalysis (EPMA) combined with a data processing method for mineralogical analysis was used to characterize the mineralogical phases in LD slags and moreover to determine their volume fractions. By this method some correlations between the phase contents and the chemical composition of LD slags were established. The diagrams gained from this work have proven to be a valuable aid for understanding the interrelationships between the chemical composition, the mineralogical structure and some physical properties of LD slags.