SOI CMOS器件研究

利用0.35μm工艺条件实现了性能优良的小尺寸全耗尽的器件硅绝缘体技术(SOI)互补金属氧化物半导体(FD SOI CMOS)器件,器件制作采用双多晶硅栅工艺、低掺杂浓度源/漏(LDD)结构以及突起的源漏区。这种结构的器件防止漏的击穿,减小短沟道效应(SCE)和漏感应势垒降低效应(DIBL);突起的源漏区增加了源漏区的厚度并减小源漏区的串联电阻,增强了器件的电流驱动能力。设计了101级环形振荡器电路,并对该电路进行测试与分析。根据在3V工作电压下环形振荡器电路的振荡波形图,计算出其单级门延迟时间为45ps,远小于体硅CMOS的单级门延迟时间。     

基于序列检测的块判决辅助Turbo均衡器

该文针对高斯分布假设条件下逐符号检测均衡器的不足,提出了一种基于序列检测的块判决辅助Turbo均衡器(Turbo-BDAE)。新算法利用译码全信息估计发送序列,提高了序列估计的可靠性,引入软判决可以降低硬判决引起的错误扩散,同时结合序列检测为均衡器输出的后验概率(APP)估计提供了更可靠的信息。仿真表明,该均衡器在保持相近复杂度的同时,进一步提升了均衡系统性能,优于逐符号LMMSE均衡器和硬反馈BDFE。     

基于叠加训练序列的低复杂度时变信道估计方案

与传统的时分/频分复用训练序列相比,采用叠加训练序列的传输方案可以有效地提高系统的频谱利用率。然而,叠加方案中训练序列与信息序列的相互干扰会造成系统性能的严重下降,如何有效消除信息干扰是提高信道估计性能的关键。该文针对时变衰落信道,首先提出一种新的基于一阶统计量信道估计算法。该算法利用基扩展模型(BEM)构建时变信道,通过时域分块平均的方法来抑制信息序列干扰。在此基础上,利用信息序列和训练序列经历相同信道衰落的特性,提出一种基于加权最小二乘(WLS)的迭代信道估计与检测方案。新方案利用 Kalman滤波检测器代替确定性最大似然(DML)检测器,将检测符号序列看作附加的“训练序列”用于信道估计,从而可以显著提高信道估计性能。仿真结果表明,新方案可以有效消除信息序列干扰,且性能和计算复杂度均优于现有的同类方案。     

铌酸钾钠基1-3型压电复合物的制备及其性能研究

采用传统固相法制备了在1 130℃下烧结而成的(K_0.45Na_0.55)_0.98Li_0.02(Nb_0.77Ta_0.18Sb_0.05)O₃(KNLNTS)无铅压电陶瓷。陶瓷致密度和电学性能较好,致密度达到98%,室温压电常数为308.7 pC/N,厚度振动机电耦合系数可达0.5,1 kHz时介电损耗为0.043。以上述KNLNTS基粉体为原料,利用切割填充法制备1-3型压电复合材料并研究了厚度对复合材料的性能影响。结果表明,复合材料的压电常数、厚度振动机电耦合系数均随厚度的增加而增加,介电损耗随厚度的增加而减少,而相对介电常数基本保持不变。     

用介孔材料制备定向碳纳米管的研究进展

综述了近年来采用介孔材料制备定向碳纳米管的研究进展,包括介孔材料的合成及介孔材料在制备定向碳纳米管方面的应用。重点介绍了采用合成介孔材料的模板剂石墨化及介孔材料作为载体制备定向碳纳米管的方法,探讨了模板剂种类、催化剂的制备方法及反应温度和时间对定向碳纳米管生长的影响和定向碳纳米管生长的介孔限制机理,并提出了这一领域的研究方向。     

“两宽一高”地震资料在花岗岩潜山储层表征中的应用——以乍得邦戈盆地为例

随着乍得邦戈盆地在L-1井区的花岗岩潜山获得油气发现,在该区开展了“两宽一高”（宽方位、宽频带、高密度）的油气勘探地震资料采集处理解释一体化技术攻关。充分利用“两宽一高”地震资料的高信噪比、全方位观测、低频信号的强穿透能力和抗干扰能力等优势,有效提高了潜山顶面偏移成像质量,获得了丰富的潜山内幕信息,为花岗岩型潜山的储层表征和潜山目标评价奠定了良好基础。本文基于“两宽一高”地震资料提出了花岗岩潜山复杂储层表征技术,根据储层的储集空间组合特征、储层类型、岩石物理特征和对应的地震响应特征,将花岗质基岩潜山储层序列划分为风化淋滤带、缝洞发育带、半充填裂缝发育带和致密带;将裂缝型和孔隙型储层分类表征,孔隙型储层通过地震多属性融合和地震反演技术进行储层定性和定量预测,裂缝型储层结合区域构造特征,分别应用曲率体、相干和OVT域地震属性等进行裂缝识别与预测;综合裂缝预测和孔隙型储层预测结果进行储层评价和优质储层预测。该配套技术在乍得邦戈盆地的实践表明,应用“两宽一高”地震资料及针对性配套技术,能有效提高邦戈盆地花岗岩潜山储层预测的精度和勘探成功率,在B区块实施的潜山探井成功率高达79%。     

Targeted Synergy between Adjacent Co Atoms on Graphene Oxide as an Efficient New Electrocatalyst for Li–CO2 Batteries

Li–CO₂ batteries are an attractive technology for converting CO₂ into energy. However, the decomposition of insulating Li₂CO₃ on the cathode during discharge is a barrier to practical application. Here, it is demonstrated that a high loading of single Co atoms (≈5.3%) anchored on graphene oxide (adjacent Co/GO) acts as an efficient and durable electrocatalyst for Li–CO₂ batteries. This targeted dispersion of atomic Co provides catalytically adjacent active sites to decompose Li₂CO₃. The adjacent Co/GO exhibits a highly significant sustained discharge capacity of 17 358 mA h g^?1 at 100 mA g^?1 for >100 cycles. Density functional theory simulations confirm that the adjacent Co electrocatalyst possesses the best performance toward the decomposition of Li₂CO₃ and maintains metallic‐like nature after the adsorption of Li₂CO₃.     

Electrically driven uniaxial stress device for tuning in situ semiconductor quantum dot symmetry and exciton emission in cryostat

Uniaxial stress is a powerful tool for tuning exciton emitting wavelength, polarization, fine-structure splitting (FSS), and the symmetry of quantum dots (QDs). Here, we present a technique for applying uniaxial stress, which enables us in situ to tune exciton optical properties at low temperature down to 15 K with high tuning precision. The design and operation of the device are described in detail. This technique provides a simple and convenient approach to tune QD structural symmetry, exciton energy and biexciton binding energy. It can be utilized for generating entangled and indistinguishable photons. Moreover, this device can be employed for tuning optical properties of thin film materials at low temperature.     

Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)