Preparation of PbTiO3 thin films using an alkoxide-alkanolamine sol-gel system

The stable range of PbTiO₃ sol and the processing conditions of uniform thin films were investigated using a solution of titanium isopropoxide, three kinds of alkanolamines (monoethanolamine, diethanolamine, triethanolamine), lead acetate trihydrate and isopropanol. Depending on the sol state with various alkanolamine/alkoxide molar ratios, diethanolamine (DEA) was very effective in preparing uniform and dense oxide films through room-temperature reaction, owing to its superior stability during the hydrolysis and condensation reaction. Perovskite PbTiO₃ thin films were obtained on oxidized silicon wafer above 550 °C and completely pure films were obtained at 650 °C using DEA as a complexing agent. The dielectric constant and loss tangent of these thin films fired at 650 °C for 30 min were found to be 240 and 0.01 at 1 kHz, respectively.     

Single-Atom Metal Sites Anchored Hydrogen-Bonded Organic Frameworks for Superior “Two-In-One” Photocatalytic Reaction

Photoredox catalysis is a green solution for organics transformation and CO₂ conversion into valuable fuels, meeting the challenges of sustainable energy and environmental concerns. However, the regulation of single-atomic active sites in organic framework not only influences the photoredox performance, but also limits the understanding of the relationship for photocatalytic selective organic conversion with CO₂ valorization into one reaction system. As a prototype, different single-atomic metal (M) sites (M²⁺ = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) in hydrogen-bonded organic frameworks (M-HOF) backbone with bridging structure of metal-nitrogen are constructed by a typical “two-in-one” strategy for superior photocatalytic C N coupling reactions integrated with CO₂ valorization. Remarkably, Zn-HOF achieves 100% conversion of benzylamine oxidative coupling reactions, 91% selectivity of N-benzylidenebenzylamine and CO₂ conversion in one photoredox cycle. From X-ray absorption fine structure analysis and density functional theory calculations, the superior photocatalytic performance is attributed to synergic effect of atomically dispersed metal sites and HOF host, decreasing the reaction energy barriers, enhancing CO₂ adsorption and forming benzylcarbamic acid intermediate to promote the redox recycle. This work not only affords the rational design strategy of single-atom active sites in functional HOF, but also facilitates the fundamental insights upon the mechanism of versatile photoredox coupling reaction systems.     

卫星USB测控副载波同步算法研究

吉林一号卫星测控采用USB测控体制,遥控接收采用FFT+DPLL1+DPLL2的架构,FFT主要实现对载波的粗捕,DPLL1在FFT的基础上实现对载波相位的精跟踪,DPLL2实现副载波的跟踪。对遥控副载波跟踪所用到的数字PLL技术进行了研究,首先给出了载波多普勒折算到副载波上的方法,然后对模拟PLL数字化进行了详细的论述,并设计了遥控副载波同步用的PLL2,对其稳定性、快捕带及快捕时间、捕获带和捕获时间、同步速率等进行了分析和仿真。结果表明,该方法具有捕获时间短、跟踪精度高、稳定性好等特点,易于数字化实现,已成功在吉林一号系列卫星中得到应用。     

Monitoring the Dynamic Process of Formation of Plasmonic Molecular Junctions during Single Nanoparticle Collisions

The capability to study the dynamic formation of plasmonic molecular junction is of fundamental importance, and it will provide new insights into molecular electronics/plasmonics, single‐entity electrochemistry, and nanooptoelectronics. Here, a facile method to form plasmonic molecular junctions is reported by utilizing single gold nanoparticle (NP) collision events at a highly curved gold nanoelectrode modified with a self‐assembled monolayer. By using time‐resolved electrochemical current measurement and surface‐enhanced Raman scattering spectroscopy, the current changes and the evolution of interfacial chemical bonding are successfully observed in the newly formed molecular tunnel junctions during and after the gold NP “hit‐n‐stay” and “hit‐n‐run” collision events. The results lead to an in‐depth understanding of the single NP motion and the associated molecular level changes during the formation of the plasmonic molecular junctions in a single NP collision event. This method also provides a new platform to study molecular changes at the single molecule level during electron transport in a dynamic molecular tunnel junction.     

0.618法最优确定盘状摆动凸轮机构的最小基圆半径

在满足机构许用压力角条件下,采用０．６１８法最优确定盘状摆动凸轮机械的最小基圆半径。     

The effect of carbon containing atmosphere on the structure and mechanical properties of Fe-32Mn-9.4Al-1C-1.27Si alloy

The effect of a carbon containing atmosphere on the microstructure and mechanical properties of Fe-32Mn-9.4Al-1C-1.27Si alloy was investigated in this work. Surface oxide nodules and grain boundary oxides were found to form on this alloy when it was annealed in carbon-containing air at 1050 °C for 1 h. The oxidation reaction was thought to be the result of the green rot attack process. This alloy was embrittled severely by the carbon-containing air through the formation of surface oxide nodules and grain boundary oxide. The carbon-containing air enhanced the oxidation rate of this alloy at 1050 °C. The structure of the oxide nodules formed on this alloy in the carbon-containing air was similar to that observed on a FeMnAl alloy heated in 1000 °C air for 24 h.     

A high payload frequency-based reversible image hiding method

To provide both a high payload capacity and a good stego-image quality, a high payload frequency-based reversible image hiding (HPFRIH) method was presented in this paper. These performances can be achieved by transforming a cover image from the spatial domain into the frequency domain through Haar digital wavelet transform (HDWT) method followed by an adaptive arithmetic coding method to encode the HDWT coefficients in a high-frequency band. The HPFRIH method was used to conceal both the compressed data and the secret data in the high-frequency band. This simple method can completely reconstruct the cover image only from the stego-image. Moreover, experimental results showed that the HPFRIH method offers both impressive hiding capacity and satisfied stego-image quality.     

CAN总线网络测试研究

介绍了CAN总线网络开发方法,搭建了CAN总线集成开发测试环境,对实际网络进行了测试,给出了位定时参数计算方法,比较了不同模拟终端电阻下的总线的报文正确率和总线负载率等性能指标.     

Sentiment-oriented contextual advertising

Web advertising (Online advertising), a form of advertising that uses the World Wide Web to attract customers, has become one of the world’s most important marketing channels. This paper addresses the mechanism of Content-based advertising (Contextual advertising), which refers to the assignment of relevant ads to a generic web page, e.g., a blog post. As blogs become a platform for expressing personal opinion, they naturally contain various kinds of expressions, including both facts and comments of both a positive and negative nature. Besides, in line with the major tenet of Web 2.0 (i.e., user-centric), we believe that the web-site owners would be willing to be in charge of the ads which are positively related to their contents. Hence, in this paper, we propose the utilization of sentiment detection to improve Web-based contextual advertising. The proposed sentiment-oriented contextual advertising (SOCA) framework aims to combine contextual advertising matching with sentiment analysis to select ads that are related to the positive (and neutral) aspects of a blog and rank them according to their relevance. We experimentally validate our approach using a set of data that includes both real ads and actual blog pages. The results indicate that our proposed method can effectively identify those ads that are positively correlated with the given blog pages.