混合集成电路激光功能调值技术

本文提出了激光功能微调技术在高精度混合集成电路上的应用，讨论了关键技术问题，并以实例具体说明。该技术的应用为研制高精度混合集成电路开辟了新途径。     

努力攀登科技高峰 为把石化工业建成支柱产业多做贡献

概述中国石化总公司成立以来所取得的重大科技成果。     

The preparation and magnetic properties of Fe-Ag granular solid using a sol-gel method

The Fe-Ag granular metal solid samples with 10% and 30% weight iron have been successfully fabricated using a sol-gel method, which are characterized by X-ray diffraction and transmission electron micrography. The average diameters of iron particles are from about a few nanometres to a few tens of nanometres controlled by the reducing temperature. The evolution of magnetic properties and microstructure during heat treating are described in detail and explained by using the superparamagnetism, single domain and multi domain theories. The magnetic anisotropy of the Fe-Ag granular solid is studied by using the law of approach to saturation. It is found that the magnetic anisotropy constant is in the order of 10⁵ J m^–3 which is higher than the value of the bulk iron and increases with the increase of reducing temperature.     

The geometry effects for stress intensity factor of sandwich specimen for measuring interfacial fracture toughness

The interfacial stress intensity factors for three types of sandwich specimens: the single edge crack tensile specimen, the three point bend specimen and the four point shear specimen were obtained by the finite element analysis and compared with the asymptotic solutions. The results show that the geometric effect for mode II specimen is larger than mode I specimen. The limit curves for geometry factor equal to 1.05 were obtained to indicate the usable range of validity of the asymptotic solution.     

A Study of the Specific Heats of the Compounds in the Sm_2O_3-BaO-CuO System

By means of X-ray diffraction and adiabatic scanning calorimeter,the specific heatsof five compounds in the Sm_2O_3-BaO--CuO system,such as Sm_2BaO_4,Sm_2CuO_4,BaCuO_4,Sm_2BaCuO_5,SmBa_2Cu_3O_(7-x),from -150℃ to 800℃ have been measured.It is found that the specific heats ofthese compounds increase smoothly with the increase of temperature.     

淀积条件对GDa—SiNx薄膜电学特性的影响

本文讨论了用辉光放电法制备氮化硅薄膜时衬底温度、射频功率和气体流量比对薄膜的电导率、介电常数和击穿强度的影响。通过优化生长条件，制备了优质非晶氮化硅薄膜，其介电常数为７．５、击穿强度为５．５ＭＶ／ｃｍ、电导率为１０－１３（Ωｃｍ）－１。     

应用多孔阳极氧化电流—时间曲线比较壁垒膜厚

在有壁垒膜存在的表面,多孔膜的生长在氧化初期受到延迟阻碍,这一现象在直流恒压多孔阳极氧化电流一时间曲线上反映出来。电流达到稳态氧化的时间愈长,壁垒膜愈厚。文中应用此法判断了0.5MH_3BO_3介质的pH值、温度对壁垒阳极氧化膜厚的影响,并应用记录同一介质环境壁垒恒流阳极氧化的槽压一时间曲线得到验证。     

A quantum amplifier model for predicting temporal variations in theoutput power from a semiconductor laser on a picosecond time scale

A new model for simulating temporal fluctuations in the power emitted by a semiconductor laser is described. Light in the cavity is assumed to circulate in the form of traveling photon packets, in which the photon number fluctuates due to the processes of spontaneous emission, stimulated emission, absorption, scattering, and reflection. The dipole dephasing time T plays a critical role in modeling the interaction of the photon packets and gain medium. The Monte Carlo method is used to simulate the temporal behavior of a continuously pumped Fabry-Perot laser. The laser output power is found to exhibit periodic fluctuations at the cavity transit time frequency (longitudinal mode beat frequency). The amplitude of these fluctuations, as well as the relaxation oscillation, which occurs at a much lower frequency, is strongly influenced by the magnitude of T. The results of these simulations are related to the temporal behavior expected from a conventional FP laser     

采用先进技术提高装置运行水平

介绍了中国石油化工股份有限公司高桥分公司 1.4Mt/a同轴式重油催化裂化装置的特点和生产情况。为了满足市场需求 ,提高经济效益 ,几年来在该装置上又采用了一些新技术 ,使装置的运转水平进一步提高。如应用降烯烃催化剂GOR Q ,与使用MLC 5 0 0催化剂相比 ,汽油烯烃体积含量约 30 % ,下降 8～ 10个百分点 ;汽油辛烷值基本不变 ;产品分布改善 ;液体收率增加 ;柴油性质变化不大。又如最大量烷烃异构化 (MIP)新型提升管反应系统的应用 ,与常规催化裂化相比 ,产品分布相当 ,汽油的烯烃体积含量下降至 30 %～ 35 % ,MON增加 0 .5～ 0 .8个单位 ,RON下降幅度不大于 0 .5个单位