Clean up of Petroleum-Hydrocarbon Contaminated Soils Using Enhanced Bioremediation System: Laboratory Feasibility Study

The objective of this study was to assess the potential of applying enhanced bioremediation on the treatment of petroleum-hydrocarbon contaminated soils. Microcosm experiments were conducted to determine the optimal biodegradation conditions. The control factors included oxygen content, nutrient addition, addition of commercially available mixed microbial inocula, addition of wood chip and rice husk mixtures (volume ratio = 1:1) as bulking agents, and addition of organic amendments (chicken manures). Results indicate that the supplement of microbial inocula or chicken manures could significantly increase the microbial populations in soils, and thus enhance the efficiency of total petroleum hydrocarbon (TPH) removal (initial TPH = 5,500?mg/kg). The highest first-order TPH decay rate and removal ratio were approximately 0.015?day?1 and 85%, respectively, observed in microcosms containing microbial inocula (mass ratio of soil to inocula = 50:1), nutrient, and bulking agent (volume ratio of soil to bulking agent = 10 to 1) during 155 days of incubation. Results indicate that the first-order TPH decay rates of 0.015 and 0.0142?day?1 can be obtained with the addition of microbial inocula and chicken manures, respectively, compared with the decay rate of 0.0069?day?1 under intrinsic conditions. Thus, chicken manures have the potential to be used as substitutes of commercial microbial inocula. The decay rate and removal ratio can be further enhanced to 0.0196?day?1 and 87%, respectively, with frequent soil shaking and air replacement. Results will be useful in designing an ex situ soil bioremediation systems (e.g., biopile and land farming) for practical application.     

地空导弹系统可测试性设计

针对地空导弹武器系统检测维修困难的现状,利用可测性设计技术,提出了地空导弹武器系统可测性设计的方法。阐述了地空导弹武器中测试性设计的必要性,论述了可测性设计的基本理论,分析了地空导弹武器系统可测性设计涉及的相关问题。     

Fabrication of Pb1‐xSnxTe/PbTe heterojunctions by liquid phase epitaxy

Abstract

Pb_1‐x Sn _x Te epitaxial layers were successfully grown on PbTe substrates by liquid phase epitaxy (LPE) technique. The compositions and surface morphology of the epitaxial Pb_1‐x Sn _x Te layers were controlled in the LPE growth, and p‐Pb_1‐x Sn _x Te/n‐PbTe heterodiodes with a good junction‐perfection factor were made.     

Data envelopment analysis in resource allocation: An application to forest management

This paper discusses the resource allocation problem for not-for-profit organizations that have control over several production units of similar functions. A case of budget allocation among the subdistricts of a forest district in Taiwan is exemplified to illustrate the idea. The model proposed is a nonlinear fractional program superimposed upon the data envelopment analysis framework. This nonlinear fractional program can be transformed to a model similar to the generalized linear program and solved by a type of decomposition method. Within prespecified ranges, the district office searches for ways of allocating a fixed amount of budget to its subdistricts to result in a higher aggregate efficiency score. Wider ranges allow for more flexibility in allocating budget; consequently, higher aggregate efficiency scores are experienced. Since this method is more objective, it is more persuasive to the subdistricts in allocating resources.     

Volume Shrinkage Induced by Interfacial Reaction in Micro-Ni/Sn/Ni Joints

Experiments are carried out to measure the volume shrinkage during solid-state reaction in micro-joints for three-dimensional integrated circuit applications. Surface profilometer is employed to measure the volume shrinkage for the reaction between Ni and Sn. The shrinkage is correlated with the microstructural evolution during the reaction. It is found that the volume shrinkage is released through both joint height reduction and void formation. The resulting internal stress and the void formation might post potential reliability issues.     

Spark Parameter Monitoring Feedback System for Preparation of Nanosilver Colloid in EDM

This study developed a system monitoring the electric discharge machine's (EDM) discharge energy and success rate to replace conventional oscilloscope observation. By using logic circuit, the signals are transmitted to the PC monitoring platform in order to display the discharge success times, discharge success rate, and electrode's consumption energy. The advantage of the proposed system is the capability to observe real-time discharges and record the experimental conditions, as well as optimize the discharge parameter settings. The experimental results suggest that, in the preparation of nanosilver colloid, the cost-performance of T_on–T_off at 10–100 µs is the optimal setting. The monitoring system also can take advantage of the discharge success rate to control the energy consumption of the electrode to obtain the standardization of products. The results suggest that, while discharge success rate, electrode's weight loss and wavelength of the absorption peak are considerably accurate, but concentration accuracy is relatively poor. The discharge success rate monitoring system is an innovative method that can help to realize electric discharge processing, optimize product quality, and it may be a powerful processing tool in the future.     

Ink drop filling by a slot coating die for an electrowetting display panel

Ink drops have to be filled into the square cells for an electrowetting display panel. Several ink solutions such as dodecane, tetradecane, and hexadecane were used as test liquids. These fluids have viscosities less than 4 mPas and surface tensions between 23.3 and 26 mN/m and contact angles less than 50°. A slot coating die was employed to deliver these liquids to fill up the square cells. The effects of several parameters such as coating thickness and coating speed were examined. Operating windows inside which the stable filling is possible could be found for these liquids. Several defects were observed outside the operating windows. A flow visualization technique was applied to observe the fluid motion in the coating bead region, particularly the movements of upstream and downstream menisci, the mechanism of liquid filling was discussed.     

Automated detection of fovea in fundus images based on vessel-free zone and adaptive Gaussian template

This study developed a computerised method for fovea centre detection in fundus images. In the method, the centre of the optic disc was localised first by the template matching method, the disc–fovea axis (a line connecting the optic disc centre and the fovea) was then determined by searching the vessel-free region, and finally the fovea centre was detected by matching the fovea template around the centre of the axis. Adaptive Gaussian templates were used to localise the centres of the optic disc and fovea for the images with different resolutions. The proposed method was evaluated using three publicly available databases (DIARETDB0, DIARETDB1 and MESSIDOR), which consisted of a total of 1419 fundus images with different resolutions. The proposed method obtained the fovea detection accuracies of 93.1%, 92.1% and 97.8% for the DIARETDB0, DIARETDB1 and MESSIDOR databases, respectively. The overall accuracy of the proposed method was 97.0% in this study.     

Null-field BIEM for solving a scattering problem from a point source to a two-layer prolate spheroid

In this paper, the acoustic scattering problem from a point source to a two-layer prolate spheroid is solved by using the null-field boundary integral equation method (BIEM) in conjunction with degenerate kernels. To fully utilize the spheroidal geometry, the fundamental solutions and the boundary densities are expanded by using the addition theorem and spheroidal harmonics in the prolate spheroidal coordinates, respectively. Based on this approach, the collocation point can be located on the real boundary, and all boundary integrals can be determined analytically. In real applications of a two-layer prolate spheroidal structure, it can be applied to simulate the kidney-stone biomechanical system. Here, we consider the confocal structure to simulate the kidney-stone system since its analytical solution can be analytically derived. The parameter study for providing some references in the clinical medical treatment is also considered. To check the validity of the null-field BIEM, a special case of the acoustic scattering problem of a point source by a rigid scatterer is also done by setting the density of the inner prolate spheroid to infinity. Results of the present method are compared with those obtained using the commercial finite element software ABAQUS.