A mathematical model and a heuristic approach for periodic material delivery in lean production environment

One of the important design elements for a good production system is material handling. In cases where it is not well-designed, it can be the bottleneck in the system. Moreover, it can cause a lot of wastes such as waiting time, idle time, and excessive transportation and cost. In this study, material handling in lean-based production environments is taken into account. Depending on the lean structure of the production systems such as being pull-based, smooth, and repetitive, delivering the materials to the stations periodically becomes important. At this point, milk-run trains are highly used in real applications since they enable the handling of required amount of materials on a planned basis. With this study, it is aimed to develop a specific model for milk-run trains which travel periodically in the production environment on a predefined route in equal cycle times with the aim of minimizing work-in-process and transportation costs. Since the milk-run trains having equal cycle times start their tours at the same time intervals, it becomes simple to manage them. For this reason, they are used in lean production systems where level scheduling is performed. The developed model is based on mixed-integer linear programming, and since it is difficult to find the optimum solution due to the combinatorial structure of the problem, a novel heuristic approach is developed. A numerical example is provided so as to show the applicability of the mathematical model and the heuristic approach.     

Hydrogeological and geochemical studies of the Efteni and Derdin geothermal areas,Turkey

The Efteni and Derdin geothermal areas are located in northwestern Turkey. Relatively low-temperature springs emerge from the Duzce Fault, a normal-component-dominated fault segment of the North Anatolian Fault System. The thermal waters of the Efteni and Derdin Springs show distinct geochemical and isotopic characteristics since they originate from different geothermal reservoirs and reflect the effects of different water–rock interaction processes. Geothermometry revealed higher reservoir temperatures for the Efteni system, however a strong δ¹⁸O shift, interpreted as being the result of isotopic exchange at high temperatures, was observed in the Derdin system. Hydrogeological and geochemical techniques are applied to identify recharge mechanisms, water–rock interaction processes and to construct conceptual models of these geothermal systems.     

Synthesis and characterization of polyaniline/activated carbon composites and preparation of conductive films

Polyaniline was synthesized via polyaniline/activated carbon (PANI/AC) composites by in situ polymerization and ex situ solution mixing. PANI and PANI/AC composite films were prepared by drop-by-drop and spin coating methods. The electrical conductivities of HCl doped PANI film and PANI/AC composite films were measured according to the standard four-point-probe technique. The composite films exhibited an increase in electrical conductivity over neat PANI. PANI and PANI/AC composites were investigated by spectroscopic methods including UV–vis, FTIR and photoluminescence. UV–vis and FTIR studies showed that AC particles affect the quinoid units along the polymer backbone and indicate strong interactions between AC particles and quinoidal sites of PANI. The photoluminescence properties of PANI and PANI/AC composites were studied and the photoluminescence intensity of PANI/AC composites was higher than that of neat PANI. The increase of conductivity of PANI/AC composites may be partially due to the doping or impurity effect of AC, where the AC competes with chloride ions. The amount of weight loss and the thermostability of PANI and PANI/AC composites were determined from thermogravimetric analysis. The morphology of particles and films were examined by a scanning electron microscope (SEM). SEM measurements indicated that the AC particles were well dispersed and isolated in composite films.     

TiN and TaN diffusion barriers in copper interconnect technology: Towards a consistent testing methodology

The present status of work on diffussion barriers for copper in multilevel interconnects is surveyed briefly, with particular emphasis on TiN and TaN, and silicon dioxide as the interlayer dielectric. New results are presented for these materials, combining thermal annealing and bias temperature stress testing. With both stress methods, various testing conditions are compared using capacitance-vs-voltage (C-V) and leakage current-vs-voltage (I-V) measurements to characterize the stressed samples. From an evaluation of these data and a comparison with other testing approaches, conditions for a consistent testing methodology of barrier reliability are outlined.     

Effect on response time and diffraction efficiency of co-usage azo dye and carbon nanoparticle in nematic liquid crystal

In this work, the formation of the photo-induced grating and nonlinear optical properties such as diffraction efficiency (η), refractive index modulation (Δn), nonlinear index coefficient (n₂) of nematic liquid crystal (E7) doped by azo dye (Methyl Red) and C60 have been investigated by diffraction grating measurements. Diffraction efficiencies of 441 nm pump and 632 nm probe beams were measured in two-wave mixing experiment. Maximum diffraction efficiency was found 26% doped with both 1% MR and 0.5% C60, while cells without C60 had maximum diffraction efficiency of 19% under 30 mW laser illumination. Rise time was found to increase with Methyl Red concentration. The nonlinear index coefficient, n₂, was calculated to be 11 × 10⁻³ cm²/W and highly depend on MR concentration.     

Isolation of Decidual Macrophages and Hofbauer Cells from Term Placenta—Comparison of the Expression of CD163 and CD80

(1) Background: Placental immune cells are playing a very important role in a successful placentation and the prevention of pregnancy complications. Macrophages dominate in number and relevance in the maternal and the fetal part of the placenta. The evidence on the polarization state of fetal and maternal macrophages involved in both, healthy and pregnancy-associated diseases, is limited. There is no representative isolation method for the direct comparison of maternal and fetal macrophages so far. (2) Material and Methods: For the isolation of decidual macrophages and Hofbauer cells from term placenta, fresh tissue was mechanically dissected and digested with trypsin and collagenase A. Afterwards cell enrichment was increased by a Percoll gradient. CD68 is represented as pan-macrophage marker, the surface markers CD80 and CD163 were further investigated. (3) Results: The established method revealed a high cell yield and purity of the isolated macrophages and enabled the comparison between decidual macrophages and Hofbauer cells. No significant difference was observed in the percentage of single CD163⁺ cells in the distinct macrophage populations, by using FACS and immunofluorescence staining. A slight increase of CD80⁺ cells could be found in the decidual macrophages. Considering the percentage of CD80⁺CD163⁻ and CD80⁻CD163⁺ cells we could not find differences. Interestingly we found an increased number of double positive cells (CD80⁺CD163⁺) in the decidual macrophage population in comparison to Hofbauer cells. (4) Conclusion: In this study we demonstrate that our established isolation method enables the investigation of decidual macrophages and Hofbauer cells in the placenta. It represents a promising method for direct cell comparison, enzyme independently, and unaffected by magnetic beads, to understand the functional subsets of placental macrophages and to identify therapeutic targets of pregnancy associated diseases.     

Synthesis and characterization of phosphonate and aromatic-based polynorbornene polymers derived from the ring opening metathesis polymerization method and investigation of their thermal properties

In the present study, phosphonate ester, phosphonic acid, and aromatic (phenyl, naphthalene, anthracene) groups containing polymers were synthesized by the ROMP method to analyze thermal properties of these polymers. Thermal stability of the synthesized polymers is tested by thermal gravimetric analysis under nitrogen, air, and microscale combustion calorimetry analysis. Analysis shows that thermal behavior is directly related to the phosphorus level in the copolymer series. All the polymers are thermally stable under nitrogen and air up to 900 °C. Synergistic charring effect under air was observed between aromatic groups and phosphonic acid functionality in the copolymer series. Anthracene units have a greater potential to form carbonaceous char than the naphthalene and phenyl units. Phosphonate ester and naphthalene units bearing copolymers (P3A) gave 8.13% char yield at 900 °C under air. Phosphonic acid derivatives of this polymer, P3D, gave a highest char residue of 17.15% under the same condition. The introduction of phosphonate and phosphonic acid in each copolymer series is also beneficial in reducing the peak heat release rate (PHRR). Cleavage of the phosphonate ester bearing homopolymer (P4) to phosphonic acid (P4A) causes a sharp decrease in the PHRR ratio from 274 to 28.2 W/g. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47085.     

Utilisation of waste clay from boron production as a landfill liner material

The objective of this study was to investigate the potential utilisation of waste clay from boron production in sanitary landfills. The waste clay (CW) was mixed with bentonite (B) and waste tyre (TW) at different ratios. Results show that, any of the CW-TW mixtures were not acceptable to use in landfills because of insufficient bearing capacity values. On the other hand, CW and 2B/98CW mixtures have sufficient values from the point of experimental tests. As a conclusion, it has been concluded that CW can be used as a liner material for landfills without an addition.     

Comparison of microwave and conventionally heated reactor performances in catalytic dehydrogenation of ethane

In the present study, non-oxidative dehydrogenation of ethane was carried out by using conventional heated (CHRS) and microwave heated (MWHRS) reactor systems. Reactions were conducted in the presence of SBA-15 supported Cr or Mo catalysts, and the activity of the catalysts were evaluated in terms of ethane conversion and C₂H₄/H₂ ratio. The physicochemical properties of synthesized catalysts were determined by XRD, N₂ adsorption/desorption, ICP-OES, TPR, SEM, and EDS analysis. XRD pattern of reduced catalysts revealed the formation of metallic Mo and Eskolaite Cr₂O₃ over the catalysts. The mesoporous structure of SBA-15 was confirmed using N₂ adsorption/desorption analysis. Activity test results showed higher ethane conversion in the presence of Mo than Cr in both reactor systems. However, more side reaction took place over Mo than Cr based catalysts. Cr based catalyst showed better activity in terms of ethylene formation and C₂H₄/H₂ ratio. Results proved the superior performance of microwave heated reactor over the conventionally heated reactor. Significantly higher conversion was obtained over Cr based catalysts in MWHRS than CHRS due to the occurrence of micro-plasmas (hot spots) in the catalyst bed. The performance of 5Cr@SBA-15 in CHRS was poor due to negligible ethane conversion below 650 °C, while almost complete conversion could be achieved in MWHRS with this catalyst at identical conditions. The ethane conversion values obtained at 650 °C in CHRS were achieved at 450 °C, in MWHRS.