Process parameters for hydrocooling apricots, plums, and peaches

Freshly harvested apricots, plums, and peaches in crates containing 5–20kg were hydrocooled in flowing water at 1°C and 50mms^-1. The cooling parameters: lag factor, cooling coefficient, and time to half-cool, determined from the exponential decline in the dimensionless ratio of temperature differences between fruit centre and coolant temperature at time t and at zero time, varied somewhat with crate load. Increasing the load from 5 to 20kg increased the time to half-cool apricots by 17% and plums and peaches by 39%.     

Fully Automated Three-Dimensional Column-Switching SPE–FIA–HPLC System for the Characterization of Lipids by a Single Injection: Part I. Instrumental Design and Chemometric Approach to Assess the Effect of Experimental Settings on the Response of ELSD

This article presents the first application of fully automated three‐dimensional (3D) column‐switching SPE–FIA–HPLC system for the characterization of lipids by a single injection. The whole system was designed and set up by modifying Agilent 1200 Series HPLC system in our laboratory. By using this system, a complete separation profile of the oil samples was achieved in a very short time period by using single injections. This approach was applied on vegetable oils which contains a large number of relatively high‐class lipid components, such as TG, FFA, sterols, tocopherols, DG, ester and MG. In this part of the study, we focused on the optimization of evaporative light scattering detector (ELSD) by using an experimental design and RSM. Three experimental parameters were chosen as an independent variables which are the flow rate of mobile phase, nebulization temperature and evaporation temperature. A multivariate five level experimental design was used to establish a quadratic model as a functional relationship between the response values and independent variables. The optimal values of parameters were found to be a flow rate of 1.25 mL min^?1, nebulization temperature of 80 °C, and evaporation temperature of 40 °C. Regression analysis with an R² values indicated as a satisfactory correlation between the experimental and predicted values. ANOVA test results were also illustrate that the models can be successfully used to predict the optimum parameters of ELSD. Thus, the proposed system is suitable for a large number of applications including research and development of new quality control and characterization methods for vegetable oils.     

The Effect of External Mass Transfer Resistance during Drying of Fermented Sausage

The drying mechanism of fermented sausages (sucuks) that were cylindrical rod shaped, 40 cm long and 4 cm diameter, during ripening under natural convection conditions at different temperatures (15 to 30°C) was examined. To simulate the experimental drying curves, three empirical models and a diffusional model assuming negligible external mass transfer resistance were evaluated. The drying rate curves of sucuk samples were also simulated taking into account the influence of the external mass transfer resistance. The equation was solved using the trial-and-error solution algorithm developed in this study and the mass transfer coefficient, k _c , and effective moisture diffusivity, D _eff , were simultaneously determined (1.44 × 10^?8 to 1.93 × 10^?8 m/s and 4.30 × 10^?10 to 6.85 × 10^?10 m²/s, respectively). The proposed model considering the effect of external resistance allowed the accurate simulation of the experimental drying data of sucuks at different temperatures.     

Characterization and dual functionalization of polystyrene with propionic anhydride and cyanate derivatives

First, Friedel–Crafts reactions were used for the acylation process. For this, polystyrene (PS) was reacted with propionic anhydride in the presence of Lewis acid catalyst. The amount of acyl group linked PS as a result of acylation has been identified as volumetric. Second, the bromination and lithiation reactions of acylated PS containing carbonyl groups were realized. Also, the lithiated PS containing acyl groups has been modified a second time with various isocyanates and isothiocyanate derivatives in the presence of n?BuLi catalyst. Some important reaction parameters were assigned in order to optimize the process. The structure all of the products were characterized by Fourier transform infrared, ¹H NMR (Proton Nuclear Magnetic Resonance), and thermogravimetric methods. In addition, reaction yields were determined according to the result of elemental analysis. Dual functionalization yields were realized between 62.2% and 69.9%. For kinetic analysis, the TG/DTG (Thermal Gravimetric Analysis/Differantial Thermal Analysis) data obtained at three different heating rates were processed by Kissinger–Akahira–Sunose method. The results demonstrated that the acylation reaction, bromination and lithiation reactions, and dual functionalization reactions with cyanate derivatives can be carried out to obtain a significantly functionalized polymer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1351‐1362, 2013     

Electrolyte type and concentration effects on poly(3-(2- aminoethyl thiophene) electro-coated on glassy carbon electrode via impedimetric study

In this study, 3-(2-Aminoethyl thiophene) (2AET) monomer was electropolymerized on glassy carbon electrode (GCE) using various electrolytes (lithium perchlorate (LiClO₄), sodium perchlorate (NaClO₄), tetrabutyl ammonium tetra fluoroborate (TBABF₄) and tetraethyl ammonium tetra fluoroborate (TEABF₄) in acetonitrile (CH₃CN) as solvent. Poly(3-(2-aminoethyl thiophene) (P(2AET))/GCE was characterized by cyclic voltammetry (CV), Fourier transform infrared reflectance spectrophotometry (FTIR-ATR), scanning electron microscopy, energy dispersive X-ray analysis (EDX), and electrochemical impedance spectroscopy (EIS) techniques. The electrochemical impedance spectroscopic results were given by Nyquist, Bode-magnitude, Bode-phase, capacitance and admittance plots. The highest low frequency capacitance (C _LF) value obtained was 0.65 mF cm^?2 in 0.1 M LiClO₄/CH₃CN for the initial monomer concentration of 1.5 mM. The highest double layer capacitance (C _dl = ~0.63 mF cm^?2) was obtained in 0.1 M LiClO₄/ACN for [2AET]₀ = 0.5, 1.0 and 1.5 mM. The maximum phase angles (θ = 76.1^o at 26.57 Hz) and conductivity (Y″ = 3.5 mS) were obtained in TEABF₄/ACN for [2AET]₀ = 0.5 and 1.0 mM, respectively. An equivalent circuit model of R(Q(R(Q(R(CR))))) was simulated for different electrolytes (LiClO₄, NaClO₄, TBABF₄ and TEABF₄)/P(2AET)/GCE system. A good fitting was obtained for the calculated experimental and theoretical EIS measurement results. The electroactivity of P(2AET)/GCE opens the possibility of using modified coated electrodes for electrochemical micro-capacitor electrodes and biosensor applications.     

Compressible magnetorheological fluids

A novel compressible magnetorheological fluid (CMRF) has been synthesized with additives that provide compressibility to the fluid. This CMRF has been designed to provide an elastic component to a magnetorheological fluid (MRF) that can be used as a springless damper. CMRF provides controllable compressibility to the MRF. The controllability of the fluid is achieved by the use of magnetic particles and an external magnetic field, and the fluid is made compressible by the addition of suspended compressible polymer particles. The compressibility of the fluid has been characterized with force–displacement measurements. This CMRF has controllable off‐state viscosity and high shear yield stress. The incorporation of polymeric particles into the MRF also decreases the settling of iron particles and improves the redispersion of the fluid. To make the fluid more redispersible, the surface of the iron particles is coated with a high‐temperature fluorinated polymer. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Crosstalk between Sodium–Glucose Cotransporter Inhibitors and Sodium–Hydrogen Exchanger 1 and 3 in Cardiometabolic Diseases

Abnormality in glucose homeostasis due to hyperglycemia or insulin resistance is the hallmark of type 2 diabetes mellitus (T2DM). These metabolic abnormalities in T2DM lead to cellular dysfunction and the development of diabetic cardiomyopathy leading to heart failure. New antihyperglycemic agents including glucagon-like peptide-1 receptor agonists and the sodium–glucose cotransporter-2 inhibitors (SGLT2i) have been shown to attenuate endothelial dysfunction at the cellular level. In addition, they improved cardiovascular safety by exhibiting cardioprotective effects. The mechanism by which these drugs exert their cardioprotective effects is unknown, although recent studies have shown that cardiovascular homeostasis occurs through the interplay of the sodium–hydrogen exchangers (NHE), specifically NHE1 and NHE3, with SGLT2i. Another theoretical explanation for the cardioprotective effects of SGLT2i is through natriuresis by the kidney. This theory highlights the possible involvement of renal NHE transporters in the management of heart failure. This review outlines the possible mechanisms responsible for causing diabetic cardiomyopathy and discusses the interaction between NHE and SGLT2i in cardiovascular diseases.     

Synthesis and metal ions sorption properties of styrene‐based polymers

Atactic polystyrene (PS) was chemically modified with maleic (MAH), succinic (SAH), and phtalic (PhAH) anhydrides. Styrene was copolymerized with acrylic (AA) and methacrylic acids (MA). Amount of carboxyl groups (%) bound to polymers was determined in the range of 6.9–25.9. Different modified polystyrenes (MPS) and styrene copolymers were used in the experiments to study Cu(II) and Zn(II) ions adsorption probability and their comparison. Sorption capacity of the polymers for the metal ions were investigated in aqueous media containing different amounts of these ions (5–40 mg/L) and at different pH values (2.0–6.0). Adsorption behavior of heavy metal ions could be modeled using both the Langmuir and Freundlich isotherms. It was found that the adsorption capacity is highest at pH value of 6, whereas it decreases as the pH value decreases at temperature 25°C ± 1°C for 240 min. The results obtained from the adsorption capacity experiments for Cu(II) and Zn(II) ions were 3.47–5.45 and 5.42–6.85 mg/g, respectively. The affinity order of polymers for both metal ions was observed as follows: SMAC > SAAC > MPS with MAH > MPS with SAH > MPS with PhAH. The maximum adsorption capacities of SMAC were 6.85mg/g for Zn(II) and 5.45 mg/g for Cu(II). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Ion-Specific Interaction of Alumina Surfaces

There has been a long-standing question about the effect of the type of ionic species on the surface forces that is not considered in the classical Derjaguin–Landau–Vervey–Overbeek theory. Originating from the work of Hofmeister, the ion-specific interaction between particles has been known for a long time. Depending on the pH and oxide type, a direct or a reverse Hofmeister effect has been observed in colloidal suspensions at high salt concentrations. The origin of this effect is not well understood but is qualitatively taken into account in colloid science. From macroscopic behavior, it is predicted that alumina particles in LiCl solution attract each other more strongly than in CsCl solutions. If such an effect does exist, then force curves obtained using the colloid probe technique may detect the difference. Using chloride salts of the two end members of the Hofmeister series, namely Li⁺ and Cs⁺, stronger attraction in the LiCl electrolyte solution compared with the CsCl one was measured for the first time at the microlevel between alumina surfaces at pH=11.