Swage casting of A380 alloy

Swage casting is a new casting technique which combines the advantages of squeeze, centrifugal and semi-solid casting methods. In this new casting method, components with one rotating axis can be produced on a swage casting machine from molten metal in a one-step operation. A shape like a “bomb-body” is chosen to demonstrate the advantages of this new method by using A380 Al–Si–Cu alloy. The same alloy is also cast with centrifugal and squeeze casting methods. In this study, the swage casting method and its features are briefly described. The final microstructures, mechanical properties and amount of porosity of the cast pieces produced by squeeze, centrifugal and swage casting methods are compared. Swage cast pieces showed a different composition of microstructure that consists of fine dendritic particles at the chill ends and a mixture of spherical and rosette shaped particles at the core. The swage cast pieces also have a slightly higher mechanical strength as indicated by tensile strength and Brinell hardness values.     

Experimental determination of the overall heat loss coefficient for energy requirement of greenhouse heating

This paper presents an experimental determination of energy requirement for greenhouse heating. The overall heat loss coefficient, heat input, the control factor for air‐tightness, the rate of heat loss and the thermal screen effectiveness were calculated. The relationships between the overall heat loss coefficient and the wind speed, and the outside temperature were modelled, including the measured and calculated values. It was found that the thermal screen effectiveness was 16 and 19.8% for the polyethylene (PE) and polyester screens, respectively. Copyright © 2005 John Wiley & Sons, Ltd.     

Static and dynamic bifurcations associated with a double-zero eigenvalue

This paper is concerned with the static and dynamic bifurcation phenomena exhibited by a nonlinear autonomous system in the vicinity of a double-zero eigenvalue. It is demonstrated analytically that such a coincident critical point is often located on the intersection of the divergence and flutter boundaries of the system. The analysis is performed via a new 'unification technique' which is based on an intrinsic perturbation procedure. The new approach is capable of yielding information about stability of solutions as well as incipient and secondary bifurcations. Indeed, the stability properties of the system and secondary Hopf bifurcations are discussed conveniently, and explicit results concerning post-critical solutions are presented. An illustrative example is analysed.     

Epidemiology of enuresis in Turkish children

The treatment and favorable outcome of a bitch with uterine torsion and two retained fetuses are described. The condition was corrected surgically by ovariohysterectomy. Complications (i.e., septic shock, peritonitis, and hemostatic abnormalities) were managed with aggressive medical therapy. Torsion of the gravid uterus in dogs is a life-threatening condition which can have a successful outcome if medical complications encountered in the pre- and postoperative periods are treated quickly and effectively.     

Electrorheological properties of kaolinite,polyindole, and polyindole/kaolinite composite suspensions

In this study, polyindole (PIN) and polyindole/kaolinite (PIN/KAO) composite were synthesized by free radical polymerization using FeCl₃ as an initiator. Average particle sizes (d₅₀) of PIN and PIN/KAO composite were determined by dynamic light scattering (DLS) as 7.2 and 6.2 μm, respectively. The samples were characterized by FTIR, elemental analysis, DSC/TGA and SEM measurements. Suspensions of KAO, PIN, and PIN/KAO composite were prepared in silicone oil (SO) and the sedimentation stabilities were determined. Electrorheological (ER) properties of these suspensions were studied as a function of dispersed phase concentration, shear rate, shear stress, and temperature; and yield stresses and excess shear stresses determined. Further, dielectric properties of KAO, PIN, and PIN/KAO composite were investigated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Neodymium-doped tantalum pentoxide waveguide lasers

The fabrication, spectroscopic properties, and laser performance of Nd/sup 3+/-doped Ta/sub 2/O/sub 5/ channel waveguide lasers are described. Lasing is obtained at both 1.066 and 1.375 /spl mu/m with threshold pump powers as low as 2.7 mW. The rib waveguides are reactive-ion-etched into Nd:Ta/sub 2/O/sub 5/ layers formed by reactive magnetron sputtering. These high-index low-loss rare-earth-doped waveguides are fabricated on silicon substrates and offer the potential for integration with photonic crystal structures for compact optical circuits.     

Preparation of cross-sectional specimens of ceramic thermal barrier coatings for transmission electron microscopy

During the microstructural examination of ceramic thermal barrier coatings by transmission electron microscopy (TEM), initial efforts for the preparation of cross-sectional thin foils from interface regions by conventional means were mostly failures. Delamination of the Y₂O₃-stabilized ZrO₂ ceramic coating from the nickel-base alloy substrate sometimes occurred during fine polishing at around 80 μm thickness but mostly occurred during dimpling. Because of this sensitivity, special techniques for mechanical handling were developed so that ion milling could give thin enough regions of the metal-ceramic interface. TEM showed convincingly that the highly fragile nature of the coatings is in fact due to the extensive porosity at the interface developed as a result of heat treatment.