Investigation of thermoluminescence properties of metal oxide doped lithium triborate

In this study, lithium triborate (LiB₃O₅) doped with different metal oxides were investigated to explore its thermoluminescence properties. Solid-state reaction method was employed for the synthesis of the desired materials. The formation of the produced phases was confirmed by Powder X-Ray Diffraction (XRD), Infrared (IR), Differential Thermal Analysis (DTA) and Scanning Electron Microscopy (SEM) examinations. It was found that, CuO and Al₂O₃ doped lithium triborate samples exhibit very significant thermoluminescence glow curves to be promising dosimetric material.     

The existence and the determination of terminal equations for hybrid connected N-ports

A new procedure for the existence and the determination of terminal equations for the hybrid interconnection of two n-port networks is given. It is shown that this procedure generalizes the previous works of Duffin, Trapp and Mitra for the hybrid sum of terminal impedance matrices which are either Hermitian positive semi-definite (HSD) or arbitrary matrices with complex entries. For the application of the new procedure it is shown that each n-port need not be terminal solvable or well defined. In fact, even in the case of active RLC n-ports considered in sinusoidal steady-state, the previous results of Duffin, Mitra and Trapp established for HSD matrices or arbitrary complex matrices can still be utilized with the use of modified terminal equations, to obtain the terminal equations of the resulting n-port networks. It is also noted that the method introduced in this paper is independent of the choice of generalized inverses.     

Evidence of PAH production under lean combustion conditions

While it is common knowledge that PAH formation can be expected at rich combustion conditions, this paper presents experimental and computational evidence that PAH formation can also be expected under lean, or cool, combustion conditions. Experimental evidence for diesel engine operation at lean conditions, as well as the literature references related to waste tire and coal combustion, are cited as supportive evidence of conclusions drawn here. A computational model based on reaction mechanisms for three surrogate fuels: C₂H₂, C₇H₁₆ and C₁₄H₂₈, was validated against the available diesel engine data, and projected to both lean and rich combustion conditions. The finding was that for the adiabatic case, minimum production of PAHs occurs at equivalence of unity and increases as equivalence becomes either lean or rich; the latter observation being consistent with the common knowledge.     

Stress-strain response of a cast 319-T6 aluminum under thermomechanical loading

The stress-strain behavior of cast 319-T6 aluminum-copper alloys with three different secondary dendrite arm spacings (SDASs) was studied at high temperatures and under thermomechanical deformation, exposing marked cyclic softening. A two state-variable unified inelastic constitutive model proposed earlier was modified to describe the stress-strain responses of these alloys by considering the variation of hardening and recovery functions of back-stress and drag stress. The SDAS was incorporated in the model as a length-scale parameter, and the material constants were determined systematically from experiments on a cast 319-T6 aluminum with small and large SDASs. The capabilities of the constitutive model were checked by the comparisons of simulations to experiments in the small-strain regime (<0.005). The results show that the model provides successful simulations for material response after thermal exposure at high temperature and cyclic transient stress-strain behavior. The causes of mechanical behaviors at the macro scale are discussed based on microstructural changes during thermal exposure.     

Characteristics of CFRP retrofitted hollow brick infill walls of reinforced concrete frames

The mechanical characteristics of infill walls retrofitted with carbon fiber reinforced polymer (CFRP) sheets are really important for the realistic prediction of seismic performance of the vulnerable reinforced concrete (RC) frames retrofitted through CFRP strengthened infill walls. In this study, 36 hollow brick wall specimens were tested either under uniaxial compression or diagonal tension before and after retrofitting externally with CFRP sheets. The test parameters are the dimensions of the walls, the orientation of holes of bricks, the type of mortar, the amount of CFRP sheets and the details of strengthening application. At the end of the tests, a significant contribution of CFRP sheets on the mechanical characteristics of hollow brick walls was observed in terms of several important structural design parameters such as Young and shears moduli, axial and shears strengths as well as the deformation capacity. Finally, the strength and deformability characteristics of the walls and frames retrofitted with CFRP sheets were predicted analytically. The predictions were in good agreement with the experimental data.     

Swage casting of A380 alloy

Swage casting is a new casting technique which combines the advantages of squeeze, centrifugal and semi-solid casting methods. In this new casting method, components with one rotating axis can be produced on a swage casting machine from molten metal in a one-step operation. A shape like a “bomb-body” is chosen to demonstrate the advantages of this new method by using A380 Al–Si–Cu alloy. The same alloy is also cast with centrifugal and squeeze casting methods. In this study, the swage casting method and its features are briefly described. The final microstructures, mechanical properties and amount of porosity of the cast pieces produced by squeeze, centrifugal and swage casting methods are compared. Swage cast pieces showed a different composition of microstructure that consists of fine dendritic particles at the chill ends and a mixture of spherical and rosette shaped particles at the core. The swage cast pieces also have a slightly higher mechanical strength as indicated by tensile strength and Brinell hardness values.     

Note-against-note two-voice counterpoint by means of fuzzy logic

In this study, we propose a fuzzy logic based approach for the ‘harmonization with constraints’ problem in music. After the mathematical modeling of the harmonization problem, the solution is carried out by means of proper fuzzy membership functions depending on the rules imposed by the music theory. To demonstrate the applicability of the proposed technique, particular problems of note-against-note two-voice counterpoint are considered. The method is flexible, adaptable and simple in terms of implementation. Moreover, from the constraint satisfaction perspective, the solutions generated by the method satisfy ‘arc-consistency’; which could not have been achieved by majority of the previous studies existing in the literature. The method also provides a gateway for the arranger/composer to incorporate his/her own stylistic preferences to the solution by simply adjusting the shapes of the membership functions. Additional features (such as providing variability in the final solutions at different executions) increase the power of the method in terms of creativity. This approach can be extended for the solution of more complicated problems in music such as orchestration, improvisation, and even composition.