Novel Hybrid Content Synchronization Scheme for Augmented Broadcasting Services

As a new hybrid broadcasting service, augmented broadcasting shows enhanced broadcasting content on a large TV screen, while augmented reality (AR) on a mobile device augments additional graphical content onto an input image from the device's own camera to provide useful and convenient information for users. A one‐sided broadcasting service using AR has already been attempted in virtual advertisements during sport broadcasts. However, because its augmentation is preprocessed before the video image is transmitted, the viewer at home may have no influence on this formation; and no interaction for the user is possible unless the viewer has a direct connection to the content provider. Augmented broadcasting technology enables viewers to watch mixed broadcasting content only when they want such service and to watch original broadcasting content when they do not. To realize an augmented broadcasting service, the most important issue is to resolve the hybrid content synchronization over heterogeneous broadcast and broadband networks. This paper proposes a novel hybrid content synchronization scheme for an augmented broadcasting service and presents its implementation and results in a terrestrial DTV environment.     

The analysis and compensation of dead-time effects in PWM inverters

The quantitative prediction of the dead-time effect in pulse width modulated (PWM) inverters is addressed. Through analysis and simulation it is shown that the effect results in a decrease of the fundamental component and an increase in the low-order harmonics in the output voltage of the inverter. To compensate the effect, two simple methods, which are adequate for sinusoidal PWM and memory-based PWM, respectively, are presented. Experimental results show the validity of the analysis and the usefulness of the compensation methods     

Theoretical analysis of cladding-mode waveguide dispersion and its effects on the spectra of long-period fiber grating

A new method to control the free spectral range (FSR) of a long-period fiber grating (LPFG) is proposed and theoretically analyzed. As the refractive index decreases radially outward in the silica cladding by graded doping of fluorine, waveguide dispersion in the cladding modes was modified to result in the effective indexes change and subsequently the phase-matching conditions for coupling with the core mode in a LPFG. Enlargement of the FSR in a LPFG was theoretically confirmed.     

Microparticle‐Based Soft Electronic Devices: Toward One‐Particle/One‐Pixel

While microparticle (MP) assemblies have long attracted academic interest, few practical applications of assembled MPs have been achieved because of technological difficulties related to MP synthesis, MP position registration, and the absence of device concepts. The precise positioning of functional MPs in a proper stencil can produce flexible/stretchable electronic devices, even when the MPs themselves are rigid. In recent years, remarkable progress has been made in the programmable position registration of MPs, production of functional MPs, and concepts for MP‐based, pixel‐type electronic devices. This progress report reviews the recent technological advances in MP assembly and discusses the technological challenges preventing the realization of the one‐particle/one‐pixel concept.     

A 60-W Multicarrier WCDMA Power Amplifier Using an RF Predistorter

In this brief, we present a 60-W power amplifier that is linearized using an RF predistorter for multicarrier wideband code-division multiple-access (WCDMA) applications. The proposed RF predistorter is fully composed of RF or analog circuits, and it has a moderate memory effect compensation capability using a delayed third-order intermodulation (IM3) component path. It also includes the IM5 generation circuits and a compact IM3 generator that is capable of autocanceling for the fundamental component. The proposed RF predistorter was implemented and applied to a 60-W high-power WCDMA amplifier. For a four-carrier downlink WCDMA signal, the RF predistorter improved the adjacent channel leakage power ratio at a 5-MHz offset by 6.19 dB at an average output power of 48 dBm. The total efficiency of the system is as high as 13.6% at the same output power level. At an output power level of 60 W, the linearized power amplifier complies with the linearity specification of the WCDMA system.     

Personalized Healthcare System for Chronic Disease Care in Cloud Environment

The rapid increase in the number of patients with chronic diseases is an important public healthcare issue in many countries, which accelerates many studies on a healthcare system that can, whenever and wherever, extract and process patient data. A patient with a chronic disease conducts self‐management in an out‐of‐hospital environment, particularly in an at‐home environment, so it is important to provide integrated and personalized healthcare services for effective care. To help provide effective care for chronic disease patients, we propose a service flow and a new cloud‐based personalized healthcare system architecture supporting both at‐home and at‐hospital environments. The system considers the different characteristics of at‐hospital and at‐home environments, and it provides various chronic disease care services. A prototype implementation and a predicted cost model are provided to show the effectiveness of the system. The proposed personalized healthcare system can support cost‐effective disease care in an at‐hospital environment and personalized self‐management of chronic disease in an at‐home environment.     

High Performance β-Ga2O3 Schottky Barrier Transistors with Large Work Function TMD Gate of NbS2 and TaS2

Gallium trioxide, β-Ga₂O₃, has been recently studied due to its promising semiconducting properties as active material in transistors or Schottky diodes. Transistors with β-Ga₂O₃ channels are mostly metal oxide field effect transistors (MOSFET), and they show very negative threshold voltages (V_th) in general. Metal semiconductor field effect transistors (MESFETs) with top gate are also reported with less negative V_th. Still, β-Ga₂O₃ MESFETs are only a few. Here, bottom gate architecture β-Ga₂O₃ MESFETs using transition metal dichalcogenide (TMD) NbS₂ and TaS₂ are reported. Due to the large work functions of those metallic TMDs, the MESFETs display minimum subthreshold swing of 61 mV dec⁻¹, small V_th of −1.2 V, minimum OFF I_D of ≈100 fA, and maximum ON/OFF current ratio of ≈10⁸. Both β-Ga₂O₃ Schottky diodes with TaS₂ and NbS₂ display good junction stability even after 300 °C measurements in 10 mTorr vacuum. When the β-Ga₂O₃ MESFET with TaS₂ gate is integrated as a switching FET into an organic light emitting diode (OLED) circuit, it demonstrates long-term leakage endurance performance, maintaining an OLED brightness higher than 58% of the initial intensity after 100 s passes since the ON-switching point, which is even superior to the performance of conventional a-IGZO MOSFET switch.     

Well‐Defined Functional Linear Aliphatic Diblock Copolyethers: A Versatile Linear Aliphatic Polyether Platform for Selective Functionalizations and Various Nanostructures

Low‐temperature anionic ring‐opening homopolymerizations and copolymerizations of two glycidol derivatives (allyl glycidyl ether (AGE) and ethoxyethyl glycidyl ether (EEGE)) are studied using a metal‐free catalyst system, 3‐phenyl‐1‐propanol (PPA) (an initiator) and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris‐(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄) (a promoter) in order to obtain well‐defined functional linear polyethers and diblock copolymers. With the aid of the catalyst system, AGE is found to successfully undergo anionic ring‐opening polymerization (ROP) even at room temperature (low reaction temperature) without any side reactions, producing well‐defined linear AGE‐homopolymer in a unimodal narrow molecular weight distribution. Under the same conditions, EEGE also undergoes polymerization, producing a linear EEGE‐homopolymer in a unimodal narrow molecular‐weight distribution. In this case, however, a side reaction (i.e., chain‐transfer reaction) is found to occur at low levels during the early stages of polymerization. The chemical properties of the monomers in the context of the homopolymerization reactions are considered in the design of a protocol used to synthesize well‐defined linear diblock copolyethers with a variety of compositions. The approach, anionic polymerization via the sequential step feed of AGE and EEGE as the first and second monomers, is found to be free from side reactions at room temperature. Each block of the obtained linear diblock copolymers undergoes selective deprotection to permit further chemical modification for selective functionalization. In addition, thermal properties and structures of the polymers and their post‐modification products are examined. Overall, this study demonstrates that a low‐temperature metal‐free anionic ROP using the PPA/t‐Bu‐P₄ catalyst system is suitable for the production of well‐defined linear AGE‐homopolymers and their diblock copolymers with the EEGE monomer, which are versatile and selectively functionalizable linear aliphatic polyether platforms for a variety of post‐modifications, nanostructures, and their applications.     

CdSe-sensitized inorganic–organic heterojunction solar cells: The effect of molecular dipole interface modification and surface passivation

CdSe-sensitized heterojunction solar cells composed of mesoscopic TiO₂/CdSe/P3HT (poly-3-hexylthiophene) were constructed, and the negative molecular dipole of 4-methoxybenzenethiol (MBT) and the ZnS passivation layer were used as interface modifiers to improve device performance. Through the interface modification between TiO₂/CdSe and P3HT using MBT and by ZnS surface passivation, the power conversion efficiency of the modified solar cell was greatly enhanced from 1.02% to 1.62% under 1 sun illumination.     

Simple and Accurate Design of Low-Density Parity-Check Codes for Multi-Input Multi-Output Systems

In this paper we design an irregular low-density parity-check (LDPC) code for multiple-input multiple-output (MIMO) systems, using a simple extrinsic information transfer (EXIT) chart method. The MIMO systems considered are the optimal maximum a posteriori probability (MAP) detector and the suboptimal minimum mean square error soft-interference cancellation (MMSE-SIC) detector. The MIMO detector and the LDPC decoder exchange soft information and form a turbo iterative receiver. The EXIT charts are used to obtain the edge degree distribution of the irregular LDPC code which is optimized for the MIMO detector. It is shown that the performance of the designed LDPC code is better than that of conventional LDPC code which was optimized for either the Additive White Gaussian Noise (AWGN) channel or the MIMO channel without an explicit consideration of the given detector structure.