Smad3 Deficiency Ameliorates Hepatic Fibrogenesis through the Expression of Senescence Marker Protein-30, an Antioxidant-Related Protein

Smad3 is a key mediator of the transforming growth factor (TGF)-β1 signaling pathway that plays central role in inflammation and fibrosis. In present study, we evaluated the effect of Smad3 deficiency in Smad3^−/− mice with carbon tetrachloride (CCl₄)-induced liver fibrosis. The animals were received CCl₄ or olive oil three times a week for 4 weeks. Histopathological analyses were performed to evaluate the fibrosis development in the mice. Alteration of protein expression controlled by Smad3 was examined using a proteomic analysis. CCl₄-induced liver fibrosis was rarely detected in Smad3^−/− mice compared to Smad3^+/+. Proteomic analysis revealed that proteins related to antioxidant activities such as senescence marker protein-30 (SMP30), selenium-binding proteins (SP56) and glutathione S-transferases (GSTs) were up-regulated in Smad3^−/− mice. Western blot analysis confirmed that SMP30 protein expression was increased in Smad3^−/− mice. And SMP30 levels were decreased in CCl₄-treated Smad3^+/+ and Smad3^−/− mice. These results indicate that Smad3 deficiency influences the proteins level related to antioxidant activities during early liver fibrosis. Thus, we suggest that Smad3 deteriorate hepatic injury by inhibitor of antioxidant proteins as well as mediator of TGF-β1 signaling.     

Enhancement in electron transport and light emission efficiency of a Si nanocrystal light-emitting diode by a SiCN/SiC superlattice structure

We report an enhancement in light emission efficiency of Si nanocrystal (NC) light-emitting diodes (LEDs) by employing 5.5 periods of SiCN/SiC superlattices (SLs). SiCN and SiC layers in SiCN/SiC SLs were designed by considering the optical bandgap to induce the uniform electron sheet parallel to the SL planes. The electrical property of Si NC LED with SiCN/SiC SLs was improved. In addition, light output power and wall-plug efficiency of the Si NC LED with SiCN/SiC SLs were also enhanced by 50% and 40%, respectively. This was attributed to both the formation of two-dimensional electron gas, i.e., uniform electron sheet parallel to the SiCN/SiC SL planes due to the conduction band offset between the SiCN layer and SiC layer, and an enhanced electron transport into the Si NCs due to a lower tunneling barrier height. We show here that the use of the SiCN/SiC SL structure can be very useful in realizing a highly efficient Si NC LED.     

Reduction in thermal conductivity of Bi thin films with high-density ordered nanoscopic pores

We prepared two-dimensional Bi thin films with high-density ordered nanoscopic pores by e-beam evaporation of Bi metal. For this structure, we used polystyrene beads ranging from 200 to 750 nm in diameter as an etch mask. The typical hole and neck sizes of the Bi thin films with approximately 50 nm in thickness on SiO₂/Si substrates were in the range of 135 to 490 nm and 65 to 260 nm, respectively. By measuring the thermal characteristics through a 3ω technique, we found that the thermal conductivities of nanoporous Bi thin films are greatly suppressed compared with those of corresponding bulk materials. With a decrease in pore size to approximately 135 nm, the thermal conductivity decreased significantly to approximately 0.46 W/m·K at 300 K.     

Flavonoids from Orostachys japonicus A. Berger Inhibit the Invasion of LnCaP Prostate Carcinoma Cells by Inactivating Akt and Modulating Tight Junctions

Tight junctions (TJs) are a mode of cell-to-cell adhesion in epithelial or endothelial cells, and serve as a physical barrier to maintenance of homeostasis in body by controlling paracellular transport. Claudins are the most important molecules of the TJs, but paradoxically these proteins are frequently over-expressed in cancers and their overexpression is implicated in the invasive potential of cancer. Hence, we investigated the effects of flavonoids extracted from Orostachys japonicus A. Berger (FEOJ) on TJs and the expression of claudins as well as cancer invasion along with in LnCaP human prostate cancer. FEOJ suppressed cancer cell motility and invasiveness at the concentrations where FEOJ did not show anti-proliferative activity. FEOJ increased transepithelial electrical resistance (TER) associated with tightening TJs, and suppressed expression of claudin proteins. Furthermore, FEOJ suppressed the activities of MMP-2 and -9 in a dose-dependent manner, which came from the activation of tissue inhibitor of metalloproteinases (TIMPs) by FEOJ. FEOJ suppressed migration and invasion by suppressing PI3K/Akt signaling pathway. Taken together, this study suggest that FEOJ suppresses cancer migration and invasion by tightening TJs through the suppression of claudin expression, and by suppressing MMPs in LnCaP human prostate cancer cells, which at least in part results from the suppression of PI3K/Akt signaling pathway.     

Site-specific growth and density control of carbon nanotubes by direct deposition of catalytic nanoparticles generated by spark discharge

Catalytic iron nanoparticles generated by spark discharge were used to site-selectively grow carbon nanotubes (CNTs) and control their density. The generated aerosol nanoparticles were deposited on a cooled substrate by thermophoresis. The shadow mask on top of the cooled substrate enabled patterning of the catalytic nanoparticles and, thereby, patterning of CNTs synthesized by chemical vapor deposition. The density of CNTs could be controlled by varying the catalytic nanoparticle deposition time. It was also demonstrated that the density could be adjusted by changing the gap between the shadow mask and the substrate, taking advantage of the blurring effect of the deposited nanoparticles, for an identical deposition time. As all the processing steps for the patterned growth and density control of CNTs can be performed under dry conditions, we also demonstrated the integration of CNTs on fully processed, movable silicon microelectromechanical system (MEMS) structures.     

Mild hydrocracking of 1-methyl naphthalene (1-MN) over alumina modified zeolite

The catalytic activity and life of the NiMoS supported on alumina–USY zeolite (physical mixture of alumina and USY (NMAZ), USY zeolite coated with alumina (NMACZ-2)) were compared in the hydrocracking of 1-methyl naphthalene by a single run at the several reaction temperatures between 360 and 400 °C as well as repeated runs at 360 °C. The relative activity of NMAZ is slightly higher after 1 h at all reaction temperatures, but was lower after 2 h at reaction temperatures above 380 °C. The preference of NMACZ-2 became distinct and definite by further increasing the reaction time at all reaction temperatures. Too long reaction time, particularly at higher reaction temperature, decreased the yield of (alkyl)benzenes, indicating the significant progress of the successive reactions. Thus, the highest yield of alkyl(benzenes) of about 97% was obtained over NMACZ-2 after 4 h at 380–390 °C. This was much less than the yield of about 82% obtained over NMAZ after 4 h at 370 °C. Ten repeated runs at 360 °C for 6 h resulted in marked decrease of yield over NMAZ from 73% to 64%, while the decrease in yield over NMACZ-2 was only from about 80% to 78%. The decrease of catalytic activity appears to reflect the coke formation on the USY which occurs on the naked acidic site of the substrate, which are rather isolated from the NiMoS on alumina. In contrast, alumina-coated support keeps USY underneath the alumina, which carries NiMoS and acidic sites on the same surface. The acidity of surface alumina is moderated by the underneath USY. The adequate acidity of the neighboring NiMoS and high hydrogenation activity provide a good balance resulting in an excellent catalytic activity and life of NiMoS supported on alumina-coated USY zeolite.     

Acid leaching of CaOSiO2 resources

Waste resources containing CaO and SiO₂ were leached by an acetic acid solution. Most CaO exist as calcium aluminosilicate and calcium silicate in steel slag and wollastonite, respectively. Silicate leaching was enhanced steeply by heating to 50 °C or increasing acid concentrations to 4 wt%. The Si and/or Al in the leachate then precipitated independently, depending on the solubility. This enabled to improve the selectivities of Ca and Si in the leachate and precipitate, respectively. However, CaO and SiO₂ are separate constituents of waste cement. The dissolution of Ca thus took place relatively fast while the ‘free’ silica leached little.     

Improved photo-catalytic activity of single-crystalline TiO2 nanowires surrounded by Pt cube nanoparticles

We report improved photo-catalytic properties of single-crystalline TiO₂ nanowires surrounded by Pt cubes for methanol electrooxidation under UV illumination. The TiO₂–Pt consists of single-crystalline TiO₂ nanowires grown along [0 0 1] direction and Pt cube nanoparticles with dominantly exposed {1 0 0} facets confirmed by transmission electron microscopy images and fast Fourier transform patterns. The nanostructure electrode consisting of TiO₂ nanowires and Pt cubes exhibits a remarkably improved performance for methanol electrooxidation in acid solution as compared to that of TiO₂ nanowires.     

Catalytic dechlorination of C5 compounds over metal-oxide/ZSM-5 catalysts

In this research, the dechlorination of 2-chloro-2-butene in C5 oil from the fluid catalytic cracking (FCC) process was performed through a catalytic reaction. Metal oxides were used as active materials and ZSM-5 was used as the supporting material for the catalysts; the metal was cobalt, iron, or manganese. After the preparation of three types of metal-oxide/ZSM-5 catalysts through the ion-exchange method, the activities and characteristics of each catalyst were evaluated. Through screening tests, the Co₃O₄/ZSM-5 catalyst was selected as the dechlorination catalyst, and the performance of catalysts containing different amounts of Co₃O₄ relative to ZSM-5 were tested.     

Conjugated polymer mediated synthesis of nanoparticle clusters and core/shell nanoparticles

Two water soluble conjugated polymers, poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and ammonium ion stabilized poly(phenylene vinylene) (P2), are found to be able to reduce noble metal ions to zero-valent metals via a direct chemical deposition technique. Au nanoparticle clusters can be obtained through reduction of Au³⁺ ions by PEDOT:PSS and the electronic coupling between them can be controlled by HAuCl₄ concentration. Core/shell Ag/polymer nanostructures are prepared from reduction of Ag⁺ ions by P2, which have a ppb detection limit for 4-MBA using surface-enhanced Raman spectroscopy (SERS). This conjugated polymer mediated synthesis of metal nanoparticles may open a new avenue for fabricating nanomaterials and nanocomposites with tunable optical properties that are dominated by their structure and electronic coupling between nanoparticles.