A new methodology for identification of critical lines using damping sensitivity analysis

When an inter-area mode dominates a low-frequency oscillation in a stressed condition, control of the active power flow of interface lines, with compensating devices, can effectively reduce the electromechanical power oscillations. In general, interface lines in which inter-area oscillations are large are considered to be good locations for installation of compensating devices. A sensitivity analysis with respect to change in active power flow can provide an important factor in electric power system operation. This paper proposes a new methodology to calculate the damping sensitivity with respect to change in active power flow, which can be useful for accurate selection of critical lines from the viewpoint of small-signal stability. In the proposed methodology, a damping sensitivity index is used to select the critical lines to damp power system oscillations. This paper describes how to derive the damping sensitivity for the selected mode and illustrates an example applying the proposed algorithm to a simple two-area system and the New England 39-bus test system.     

A fault analysis of DC electric arc furnaces with SVC harmonic filters in a mini-mill plant

This paper proposes the most feasible solution to overcome the failure of the 2nd harmonic filter in the static VAR compensator (SVC) which operates with the DC electric arc furnace (EAF) at Gwangyang Steel Mill in Korea. In order to investigate the causes of this failure, various measurements were carried out on the DC EAF and the main transformer at the PCC (point of common connection). It was concluded that the two causes for the failure are; the inrush current in the main transformer, and the parallel resonance between the system impedance and the harmonic filter. Three solutions to suppress the transformer inrush current and another three solutions to avoid the parallel resonance are suggested. The feasibility of these solutions was verified through the computer simulation with PSCAD/EMTDC. The most feasible solution to avoid further failures of the 2nd harmonic filter was selected, based on the estimated result for the six optional solutions in the point of performance and cost.     

A reconfigurable microstrip antenna for switchable polarization

A novel reconfigurable microstrip antenna with switchable polarization sense is proposed. The proposed antenna has a simple structure, consisting of a corner-truncated square radiating patch, four small triangular conductors, and a microstrip line feed. Using independently biased PIN diodes on the patch, it can produce linear polarization, or left- or right-hand circular polarization according to bias voltages. From the measured results, low cross-polarization levels when operated in the linear state and good axial ratios in the circular state are observed.     

Modus Operandi of Simultaneous Covering Synthesis from Precursor Heterogeneity for Shelled Nanorods for Multipotent Cancer Theranostics

The synthesis of nanostructures using homogeneous precursors in the solution phase is widely used to achieve uniformity and well‐defined morphological control. However, drawbacks such as the lack of diversity due to the limited reaction rate modulation exist. One‐step, core–shell nanorod formation using simultaneous covering synthesis using solid and ionic heterogeneous precursors is proposed in this study. A Te‐Bi₂Te₃/TeO₂ core–shell structure is successfully synthesized by precisely controlling various influencing factors, including concentration, temperature, and pH, and its physicochemical and photochemical properties are thoroughly investigated. The proposed nanostructure overcomes the oxidation susceptibility of Te and can be applied to multipotent cancer theranostics in vitro and in vivo in combination with computed tomography imaging.     

Highly Crystalline Soluble Acene Crystal Arrays for Organic Transistors: Mechanism of Crystal Growth During Dip‐Coating

The preparation of uniform large‐area highly crystalline organic semiconductor thin films that show outstanding carrier mobilities remains a challenge in the field of organic electronics, including organic field‐effect transistors. Quantitative control over the drying speed during dip‐coating permits optimization of the organic semiconductor film formation, although the kinetics of crystallization at the air–solution–substrate contact line are still not well understood. Here, we report the facile one‐step growth of self‐aligning, highly crystalline soluble acene crystal arrays that exhibit excellent field‐effect mobilities (up to 1.5 cm V^?1 s^?1) via an optimized dip‐coating process. We discover that optimized acene crystals grew at a particular substrate lifting‐rate in the presence of low boiling point solvents, such as dichloromethane (b.p. of 40.0 °C) or chloroform (b.p. of 60.4 °C). Variable‐temperature dip‐coating experiments using various solvents and lift rates are performed to elucidate the crystallization behavior. This bottom‐up study of soluble acene crystal growth during dip‐coating provides conditions under which one may obtain uniform organic semiconductor crystal arrays with high crystallinity and mobilities over large substrate areas, regardless of the substrate geometry (wafer substrates or cylinder‐shaped substrates).     

A Multi‐Functional Highly Efficient Upconversion Luminescent Film with an Array of Dielectric Microbeads Decorated with Metal Nanoparticles

Upconversion nanoparticles (UCNPs) have been integrated with photonic platforms to overcome the intrinsically low quantum efficiency limit of upconversion luminescence (UCL). However, platforms based on thin films lack transferability and flexibility, which hinders their broader and more practical application. A plasmonic structure is developed that works as a multi‐functional platform for flexible, transparent, and washable near‐infrared (NIR)‐to‐visible UCL films with ultra‐strong UCL intensity. The platform consists of dielectric microbeads decorated with plasmonic metal nanoparticles on an insulator/metal substrate. Distinct improvements in NIR confinement, visible light extraction, and boosted plasmonic effects for upconversion are observed. With weak NIR excitation, the UCL intensity is higher by three orders of magnitude relative to the reference platform. When the microbeads are organized in a square lattice array, the functionality of the platform can be expanded to wearable and washable UCL films. The platform can be transferred to transparent, flexible, and foldable films and still emit strong UCL with a wide viewing angle.     

A new three-level soft-switched converter

A three-level, constant-frequency, isolated converter which employs a coupled inductor to achieve zero-voltage switching of the primary switches in the entire line and load range is described. Because the coupled inductor does not appear as a series inductance in the load current path, it does not cause a loss of duty cycle or severe voltage ringing across the output rectifiers. The operation and performance of the proposed converter was verified on a 1-kW prototype.     

Forward-stepwise regression analysis for fine leak batch testing of wafer-level hermetic MEMS packages

An advanced regression scheme is proposed to analyze fine leak batch testing data of multiple MEMS packages. The scheme employs the forward-stepwise regression method to infer the information of leaky packages from a batch test data. The analysis predicts the number of leaky packages and the true leak rate of each leaky package in a progressive manner. The scheme is implemented successfully using an actual batch test data obtained from wafer-level hermetic MEMS packages. An error analysis is followed to define the applicable domain of the scheme. Advanced formulations are also suggested to extend the applicable domain.     

A Multi‐Strategic Concept‐Spotting Approach for Robust Understanding of Spoken Korean

We propose a multi‐strategic concept‐spotting approach for robust spoken language understanding of conversational Korean in a hostile recognition environment such as in‐car navigation and telebanking services. Our concept‐spotting method adopts a partial semantic understanding strategy within a given specific domain since the method tries to directly extract pre‐defined meaning representation slot values from spoken language inputs. In spite of partial understanding, we can efficiently acquire the necessary information to compose interesting applications because the meaning representation slots are properly designed for specific domain‐oriented understanding tasks. We also propose a multi‐strategic method based on this concept‐spotting approach such as a voting method. We present experiments conducted to verify the feasibility of these methods using a variety of spoken Korean data.     

Inverted Staggered Poly-Si Thin-Film Transistor With Planarized SOG Gate Insulator

In this letter, we have studied the inverted staggered thin-film transistor (TFT) using a spin-on-glass (SOG) gate insulator and a low-temperature polycrystalline silicon (poly-Si) by Ni-mediated crystallization of amorphous silicon. The p-channel poly-Si TFT exhibited a field-effect mobility of 48.2 cm²/V ldr s, a threshold voltage of -4.2 V, a gate-voltage swing of 1.2 V/dec, and a minimum off-current of < 4 times 10^-13A/ mum at V_ds = -0.1 V. Therefore, the gate planarization technology by SOG can be applicable to low-cost large-area poly-Si active-matrix displays.