Chemical Properties and Oxidative Stability of Perilla Oils Obtained From Roasted Perilla Seeds As Affected by Extraction Methods

Abstract: The chemical properties and oxidative stability of perilla oils obtained from roasted perilla seeds as affected by extraction methods (supercritical carbon dioxide [SC‐CO₂], mechanical press, and solvent extraction) were studied. The SC‐CO₂ extraction at 420 bar and 50 °C and hexane extraction showed significantly higher oil yield than mechanical press extraction (P < 0.05). The fatty acid compositions in the oils were virtually identical regardless of the extraction methods. The contents of tocopherol, sterol, policosanol, and phosphorus in the perilla oils greatly varied with the extraction methods. The SC‐CO₂‐extracted perilla oils contained significantly higher contents of tocopherols, sterols, and policosanols than the mechanical press‐extracted and hexane‐extracted oils (P < 0.05). The SC‐CO₂‐extracted oil showed the greatly lower oxidative stability than press‐extracted and hexane‐extracted oils during the storage in the oven under dark at 60 °C. However, the photooxidative stabilities of the oils were not considerably different with extraction methods.     

How many reference patterns can improve profitability for real-time trading in futures market?

Investors in futures market used to employ trading system which depends on reference pattern (template) to detect real-time buy or sell signal from the market. Indeed they prepare in advance a number of reference patterns that market movement might follow, and then match the current market with one of reference patterns. One popular way to prepare templates is to fix a relatively small number of them which represent possible market movements efficiently. The underlying assumption of this approach is of course that the current market movement is close enough to one of the templates. However, there is always a calculated risk that the current market is close to none of them sufficiently. In this article we investigate the issue of appropriate number of templates (or template cardinality I) in terms of profitability. We will show that one may improve profitability by increasing I and that random pattern sampling plays a key role in such case. An empirical study is done on the Korean futures market.     

Inhibitory effect of sowthistle (Ixeris dentata) on development and expression of behavioral locomotor sensitization to nicotine in rats

The aim of this study was to investigate the effects of sowthistle (Ixeris dentata, IXD) on development and expression of nicotine-induced locomotor sensitization and underlying neuronal activation reflected by c-Fos expression in rats. Rats were pretreated with IXD 30 min before a daily injection of nicotine during an 8-day development phase and then challenged with nicotine after a 6-day withdrawal period. In another set of experiments, same IXD doses were administered once 30 min before nicotine challenge. Daily IXD treatment during development phase was not effective in blocking nicotine-induced locomotor sensitization in rats. However, a single IXD treatment after the development and withdrawal periods of nicotine sensitization significantly alleviated sensitized locomotor behavior on day 15. These behavioral results were coincident with significant inhibition of nicotineinduced c-Fos expression in the nucleus accumbens. These results indicated that IXD pretreatment significantly blocked the expression, but not the development of nicotine-induced locomotor sensitization in rats.     

Synthesis of highly concentrated suspension of chemically converted graphene in organic solvents: Effect of temperature on the extent of reduction and dispersibility

We report the effect of temperature on the extent of graphene oxide reduction by hydrazine and the dispersibility of the resulting chemically converted graphene (CCG) in polar organic solvents. The extent of graphene oxide reduction at high temperatures was only slightly higher than at low temperatures (30–50 °C), while the dispersibility of the resulting CCG in organic solvents decreased markedly with increasing temperature. The low dispersibility of CCGs prepared at high temperatures was greatly affected by reduction and influenced by the formation of an irreversible agglomerate of CCG at high temperatures. The reduction of graphene oxide at low temperatures is necessary to prepare highly dispersible CCG in organic solvents. CCG prepared at 30 °C is dispersible in N-methyl-2-pyrrolidone concentrations as high as 0.71 mg/mL. The free-standing paper made of this CCG possessed an electrical conductivity of more than 22,000 S/m, one of the highest values ever reported.     

A joint normalcy index to evaluate patients with gait pathologies in the functional aspects of joint mobility

Gait analysis using 3D motion capture systems provides joint kinematic and kinetic analysis results such as joint relative angles and moments that can be use used to evaluate the degrees of pathological gait patterns. However, the complex data produced using these 3D motion capture systems can only analyzed by experts, because the gait analysis is highly coupled to the kinematics of each joint. Therefore, several Several previous studies using gait analysis have relied on the data compression technique to represent gait deviation from the average normal profiles as a single value. Even though it is important to evaluate gait pathologies at the joint level, all these previous studies have just used a single value to evaluate the pathological gait pattern. Using just one variable for evaluation of a gait is limited in terms of determining which joint movement patterns are getting better during rehabilitation. Therefore, in this study, a method suitable for evaluating gait deviation during a gait was developed to provide three indices for the hip, knee and ankle joints. In addition, to validate the proposed method in clinical cases, experimental tests were conducted on thirty thirty-six normal walkers and six patients with cerebral palsy. Furthermore, to validate the proposed method in regards to rehabilitation, experimental tests were conducted on three classified walking groups with imposed ankle equinus constraints. The JNI for the hip joint, knee joint and ankle were 8.78 (±3.70), 2.92 (±3.25) and 8.79 (±4.38), respectively, in the normal walking group. However, these values were significantly different for the pathological walking group with cerebral palsy. The JNI of the hip joint, knee joint and ankle joint were 203.73 (±171.59), 81.23 (±52.13) and 248.39 (±149.99), respectively, for this group. There were also differences between any two of the three classified groups with imposed ankle equinus constraints. In particular, the JNI of the ankle joint was statistically different at the p<0.01 level, and this parameter clearly increased as the degree of the imposed ankle equinus was increased. These results demonstrate that the proposed JNI can be used as a scalar factor to evaluate the angular deviation of each joint in normal and patient groups. In addition, this approach can be adapted to evaluate rehabilitation and pre/post surgery.     

Solid‐State Conversion of Single Crystals: The Principle and the State‐of‐the‐Art

Solid‐state conversion of single crystals from polycrystalline materials has the advantages of cost‐effectiveness, chemical homogeneity, and versatility over the conventional melt growth and solution growth methods, particularly for systems with high melting points, incongruent melting, high reactivity (volatility), and phase transformations at high temperature. Nevertheless, for commercial production, this technique has only been successful in a few limited systems, in particular ferroelectric systems. This is mostly because of the difficulty in controlling the microstructure, particularly suppressing grain growth in the polycrystal during its conversion. This article describes the principle and the current status of the solid‐state conversion of single crystals. We first introduce the recently developed principle of microstructural evolution to explain the basis of the microstructure control in polycrystals for solid‐state conversion. We then report recent technical developments in fabricating single crystals by the solid‐state single crystal growth (SSCG) method and their physical properties. The SSCG method is expected to be studied and utilized more widely in fabricating single crystals with complex compositions as a strong alternative to the melt growth and solution growth methods.     

Structural size effects of intermetallic compounds on the mechanical properties of Mo-Si-B alloy: An experimental investigation

In general, size, shape and dispersion of phases in alloys significantly affect mechanical properties. In this study, the mechanical properties of Mo-Si-B alloys were experimentally investigated with regards to the refinement of intermetallic compound. To confirm the size effect of the intermetallic compound phases on mechanical properties, two differently sized intermetallic compound powders consisting Mo₅SiB₂ and Mo₃Si were fabricated by mechano-chemical process and high-energy ball milling. A modified powder metallurgy method was used with core-shell intermetallic powders where the intermetallic compound particles were the core and nano-sized Mo particles which formed by the hydrogen reduction of Mo oxide were the shells, leading to the microstructures with uniformly distributed intermetallic compound phases within a continuous α-Mo matrix phase. Vickers hardness and fracture toughness were measured to examine the mechanical properties of sintered bodies. Vickers hardness was 472 Hv for the fine intermetallic compound powder and 415 Hv for the coarse intermetallic compound powder. The fracture toughness was 12.4 MPa·√m for the fine IMC powders and 13.5 MPa·√m for the coarse intermetallic compound powder.     

Comparison of the Antimicrobial and Sanitizer Resistance of Salmonella Isolates from Chicken Slaughter Processes in Korea

Salmonella is a foodborne pathogen worldwide. Outbreaks of Salmonella are commonly associated with consumption of contaminated foods such as poultry products. Therefore, the objective of this study was to determine the occurrence, biofilm formation, antibiotic resistance, and sanitizer resistance of Salmonella enterica isolated from chicken carcasses. A total of 318 samples were collected from 15 chicken slaughterhouses in 8 provinces of Korea. They were then examined for Salmonella contamination. S. enterica isolates were tested for their susceptibilities to 15 antimicrobials by broth microdilution method. Their biofilm formation ability and resistance to sanitizers were also evaluated. Eighty‐two isolates of S. enterica were obtained from the 318 samples. There were 14 serotypes and 2 untypable isolates. Fifty‐seven (69.5%) isolates were resistant to at least one antibiotic while 30 (36.6%) isolates were resistant to 5 or more antibiotics. Two S. Senftenberg and 3 S. Montevideo isolates exhibited considerable biofilm formation ability (A₆₀₀>0.2) following incubation in Luria‐Bertani (LB) broth for 48 h. Biofilm cell survival and recovery growth assay after sanitization showed that most isolates were highly susceptible to 2.5% lactic acid and 0.1% cetylpyridinium chloride. Therefore, lactic acid and cetylpyridinium chloride might be alternatively or additionally used in addition to chlorine‐based sanitizers that are frequently used to reduce Salmonella contamination of chicken carcasses. Our results provide basic information on the distribution of Salmonella serotypes in chicken slaughterhouses. This study also highlights the necessity to improve farming practices and use antimicrobial agents cautiously. This study also suggests that sanitization during the slaughtering process might be necessary to reduce Salmonella contamination of chicken carcasses.     

Lipid production in Porphyridium cruentum grown under different culture conditions

Autotrophic growth of Porphyridium cruentum under 18:12 h and 12:12 h light:dark cycles showed the maximum cell concentration of 2.1 g-dry wt./L, whereas the specific growth rate, 0.042 (1/h), at 18:6 h is faster than that of 12:12 h, 0.031 (1/h), respectively. The highest lipid accumulation level, 19.3 (%, w/w), was achieved at 12:12 h cycle. Under dark cultivation condition with 10 g/L of glucose, the lipid accumulation in the cell was 10.9 (%, w/w), whereas the heterotrophic growth with glycerol as the carbon resource showed low level of cell concentration and lipid production, compared to that of glucose. The glucose was decided to be a suitable carbon resource for the heterotrophic growth of P. cruentum. The lipids from P. cruentum seemed be feasible for biodiesel production, because over 30% of the lipid was C₁₆–C_18:1. The cultivation time and temperature were important factors to increase the maximum cell concentration. Extending the cultivation time helps maintain the maximum cell concentration, and higher lipid accumulation was achieved at 25 °C, compared to 35 °C. The fed-batch cultures showed that, under the light condition, the specific production rate was slightly decreased to 0.4% lipid/g-dry wt./day at the later stage, whereas, under the dark condition, the specific production rate was maintained to be a maximum value of 1.1% lipid/g-dry wt./day, even in the later stage of cultivation. The results indicate that the heterotrophic or 12:12 h cyclic mixotrophic growth of P. cruentum could be used for the production of biodiesel in long-term fed-batch cultivation of P. cruentum.