表面氧化层对TiMn1.25Cr0.25储氢合金活化性能的影响

通过TiMn1.25Cr0.25合金粉活化前在空气中暴露不同的时间,探讨了表面氧化层的形成对其活化性能的影响。活化测试结果表明：合金的活化难度随着合金在空气中暴露时间的延长而加大。俄歇电子能谱(AES)结果表明,在空气中暴露后的合金表面形成了一层大约6nm-10nm厚的表面氧化层,正是这层氧化层的形成加大了合金的活化难度。扫描电镜(SEM)结果表明合金的活化过程与合金的碎化有着密切的联系。     

Multifocus image fusion method of Ripplet transform based on cycle spinning

The curvelet transform can represent images at both different scales and different directions. Ripplet transform, as a higher dimensional generalization of the curvelet transform, provides a new tight frame with sparse representation for images with discontinuities along C² curves. However, the ripplet transform is lack of translation invariance, which causes the pseudo-Gibbs phenomenon on the edges of image. In this paper, the cycle spinning method is adopted to suppress the pseudo-Gibbs phenomena in the multifocus image fusion. On the other hand, a modified sum-modified-laplacian rule based on the threshold is proposed to make the decision map to select the ripplet coefficient. Several experiments are executed to compare the presented approach with other methods based on the curvelet, sharp frequency localized contourlet transform and shearlet transform. The experiments demonstrate that the presented fusion algorithm outperforms these image fusion works.     

一种内嵌导磁槽的圆感应同步器

圆感应同步器是一种高精度角度传感器,传统的圆感应同步器的转子需外引激励线以驱动其工作,鉴于圆感应同步器在使用过程中需要连续旋转,这将使得外引激励线存在绞线的问题,本文提出一种新的设计方法,在圆感应同步器的定、转子基体上嵌有环状的金属导磁槽,导磁槽内放入环状金属导线.通过给定子导磁槽内的环状金属导线施加激励信号,此激励信号可耦合到转子导磁槽内的环状金属导线中以驱动转子工作,这使得转子无需外引激励线,进而提高了系统应用的便利性以及可靠性.     

网络机房的故障诊断与排除

目前,计算机网络课程已成为职业院校各专业的必修课。为了加强实践教学,培养实用型人才,网络机房使用的频率越来越高,随之产生的故障也越来越多。只有通过机房管理员及时发现故障,准确定位故障,彻底排除故障,才能延长网络机房使用寿命,确保实践教学高效、顺利进行。本文从实践出发,分析了网络机房的故障、原因、诊断和排除。此外,本文还介绍了网络常用命令和仪器。     

An interactive lung field segmentation scheme with automated capability

Feasible clinical application of any automated segmenting methodology demands more than just accuracy. Amendment to the automated delineation is necessary when the algorithm fails, however, integrated solution to such a scenario is largely absent in literature. Hence in this survey we devised an architecture that does both the automated and interactive lung field localizations using a single segmenting engine—random walker algorithm—so that intuitive amendment is only necessary when the automated generated delineation is unsatisfactory. The algorithm proceeds by first extracting 18 intensity profiles running horizontally, each of them equally spacing apart, and in each intensity profile three extreme points denoting the two lungs and the esophagus are determined through profile matching. This done, the algorithm removes profiles that do not intersect with the lung, and the rest of the extreme points are plugged into random walker algorithm to perform segmentation. The achieved accuracy in localization by the above was 0.8875 in terms of overlap measure (the maximum value for this parameter is 1) over 341 images. In the case where unsatisfactory delineation prompts amendment necessary, the user can interactively segment the lung by just a shift on some of the previous-determined points to the desired locations, and random walker algorithm is run again with the amended input. By such a fusion, the benefits of both the automated and interactive segmentation are shared in a single architecture.     

小型水利工程项目划分分析

以小型水利工程项目划分为对象,从质量监督确认工作角度出发,根据小型水利工程的特点,探讨在现有规程下针对实际不同工程的恰当的项目划分方式,以利参建各方更好地控制工程质量。