Feedback linearization vs. adaptive sliding mode control for a quadrotor helicopter

This paper presents two types of nonlinear controllers for an autonomous quadrotor helicopter. One type, a feedback linearization controller involves high-order derivative terms and turns out to be quite sensitive to sensor noise as well as modeling uncertainty. The second type involves a new approach to an adaptive sliding mode controller using input augmentation in order to account for the underactuated property of the helicopter, sensor noise, and uncertainty without using control inputs of large magnitude. The sliding mode controller performs very well under noisy conditions, and adaptation can effectively estimate uncertainty such as ground effects. Recommended by Editorial Board member Hyo-Choong Bang under the direction of Editor Hyun Seok Yang. This work was supported by the Korea Research Foundation Grant (MOEHRD) KRF-2005-204-D00002, the Korea Science and Engineering Foundation(KOSEF) grant funded by the Korea government(MOST) R0A-2007-000-10017-0 and Engineering Research Institute at Seoul National University. Daewon Lee received the B.S. degree in Mechanical and Aerospace Engineering from Seoul National University (SNU), Seoul, Korea, in 2005, where he is currently working toward a Ph.D. degree in Mechanical and Aerospace Engineering. He has been a member of the UAV research team at SNU since 2005. His research interests include applications of nonlinear control and vision-based control of UAV. H. Jin Kim received the B.S. degree from Korea Advanced Institute of Technology (KAIST) in 1995, and the M.S. and Ph.D. degrees in Mechanical Engineering from University of California, Berkeley in 1999 and 2001, respectively. From 2002–2004, she was a Postdoctoral Researcher and Lecturer in Electrical Engineering and Computer Science (EECS), University of California, Berkeley (UC Berkeley). From 2004–2009, she was an Assistant Professor in the School of in Mechanical and Aerospace Engineering at Seoul National University (SNU), Seoul, Korea, where she is currently an Associate Professor. Her research interests include applications of nonlinear control theory and artificial intelligence for robotics, motion planning algorithms. Shankar Sastry received the B.Tech. degree from the Indian Institute of Technology, Bombay, in 1977, and the M.S. degree in EECS, the M.A. degree in mathematics, and the Ph.D. degree in EECS from UC Berkeley, in 1979, 1980, and 1981, respectively. He is currently Dean of the College of Engineering at UC Berkeley. He was formerly the Director of the Center for Information Technology Research in the Interest of Society (CITRIS). He served as Chair of the EECS Department from January, 2001 through June 2004. In 2000, he served as Director of the Information Technology Office at DARPA. From 1996 to 1999, he was the Director of the Electronics Research Laboratory at Berkeley (an organized research unit on the Berkeley campus conducting research in computer sciences and all aspects of electrical engineering). He is the NEC Distinguished Professor of Electrical Engineering and Computer Sciences and holds faculty appointments in the Departments of Bioengineering, EECS and Mechanical Engineering. Prior to joining the EECS faculty in 1983 he was a Professor with the Massachusetts Institute of Technology (MIT), Cambridge. He is a member of the National Academy of Engineering and Fellow of the IEEE.     

MEMS-based gas flow sensors

Micro-electro-mechanical system (MEMS) devices integrate various mechanical elements, sensors, actuators, and electronics on a single silicon substrate in order to accomplish a multitude of different tasks in a diverse range of fields. The potential for device miniaturization made possible by MEMS micro-fabrication techniques has facilitated the development of many new applications, such as highly compact, non-invasive pressure sensors, accelerometers, gas sensors, etc. Besides their small physical footprint, such devices possess many other advantages compared to their macro-scale counterparts, including greater precision, lower power consumption, more rapid response, and the potential for low-cost batch production. One area in which MEMS technology has attracted particular attention is that of flow measurement. Broadly speaking, existing micro-flow sensors can be categorized as either thermal or non-thermal, depending upon their mode of operation. This paper commences by providing a high level overview of the MEMS field and then describes some of the fundamental thermal and non-thermal micro-flow sensors presented in the literature over the past 30 years or so.     

Extraction of genomic DNA and detection of single nucleotide polymorphism genotyping utilizing an integrated magnetic bead-based microfluidic platform

This study presents a new magnetic bead-based microfluidic platform, which integrates three major modules for rapid leukocytes purification, genomic DNA (gDNA) extraction and fast analysis of genetic gene. By utilizing microfluidic technologies and magnetic beads conjugated with CD_15/45 antibodies, leukocytes in a human whole blood sample can be first purified and concentrated, followed by extraction of gDNA utilizing surface-charge switchable, DNA-specific, magnetic beads in the lysis solution. Then, specific genes associated with genetic diseases can be amplified by an on-chip polymerase chain reaction (PCR) process automatically. The whole pretreatment process including the leukocytes purification and gDNA extraction can be performed in an automatic fashion with the incorporation of the built bio-separators consisting of microcoils array within less than 20 min. The detection of single nucleotide polymorphism (SNP) genotyping of methylenetetra-hydrofolate reductase (MTHFR) C677T region associated with an increased risk of genetic diseases was further performed to demonstrate the capability of the proposed system. The extracted gDNA can be transported into a micro PCR chamber for on-chip fast nucleic acid amplification of detection genes with minimum human intervention. Hence, the developed system may provide a powerful automated platform for pretreatment of human leukocytes, gDNA extraction and fast analysis of genetic gene.     

Rate control algorithm based on intra-picture complexity for H.264/AVC

An efficient rate control algorithm based on the content-adaptive initial quantisation parameter (QP) setting scheme and the peak signal-to-noise ratio (PSNR) variation-limited bit-allocation strategy for lowcomplexity mobile applications is presented. This algorithm can efficiently measure the residual complexity of intra-pictures without performing the computation-intensive intra-prediction and mode decision in H.264/AVC, based on the structural and statistical features of local textures. This can adaptively set proper initial QP values for versatile video contents. In addition, this bit-allocation strategy can effectively distribute bit-rate budgets based on the monotonic property to enhance overall coding efficiency while maintaining the consistency of visual quality by limiting the variation of quantisation distortion. The experimental results reveal that the proposed algorithm surpasses the conventional rate control approaches in terms of the average PSNR from 0.34 to 0.95 dB. Moreover, this algorithm provides more impressive visual quality and more robust buffer controllability when compared with other algorithms.     

Proteomic analysis of sera of asymptomatic,early‐stage patients with Wilson's disease

Wilson's disease (WD) is characterized by excessive accumulation of intracellular copper in liver and extrahepatic tissues, leading to significant oxidative stress and tissue damage. To date, several diagnostic biomarkers for WD such as serum ceruloplasmin, serum or urine copper levels and copper content in liver have been identified. However, these biomarkers may not be convincing for the diagnosis in some WD patients. To identify additional novel diagnostic biomarkers, we compared the serum protein profiles of asymptomatic childhood WD patients (n=20), without neurologic manifestation or liver cirrhosis, with normal controls (n=13). Fourteen spots, five up‐regulated and nine down‐regulated (>2‐fold), were differentially expressed in WD patients in comparison to normal control on 2‐DE. Among them, three spots were down‐regulated in both male and female WD. MS/MS analysis revealed that the three spots were complement component C3, complement factor B and alpha‐2 macroglobulin. By comparative proteome analysis, complement component C3, complement factor B and alpha‐2 macroglobulin, which are related to oxidative stress and inflammation, turned out to be good candidates for novel diagnostic biomarkers for early stages of WD.     

NodeWiz: Fault-tolerant grid information service

Large scale grid computing systems may provide multitudinous services, from different providers, whose quality of service will vary. Moreover, services are deployed and undeployed in the grid with no central coordination. Thus, to find out the most suitable service to fulfill their needs, or to find the most suitable set of resources on which to deploy their services, grid users must resort to a Grid Information Service (GIS). This service allows users to submit rich queries that are normally composed of multiple attributes and range operations. The ability to efficiently execute complex searches in a scalable and reliable way is a key challenge for current GIS designs. Scalability issues are normally dealt with by using peer-to-peer technologies. However, the more reliable peer-to-peer approaches do not cater for rich queries in a natural way. On the other hand, approaches that can easily support these rich queries are less robust in the presence of failures. In this paper we present the design of NodeWiz, a GIS that allows multi-attribute range queries to be performed efficiently in a distributed manner, while maintaining load balance and resilience to failures.     

Stable microwave coaxial cavity plasma system at atmospheric pressure

We present a systematic study of the development of a novel atmospheric microwave plasma system for material processing in the pressure range up to 760 torr and the microwave input power up to 6 kW. Atmospheric microwave plasma was reliably produced and sustained by using a cylindrical resonator with the TM(011) cavity mode. The applicator and the microwave cavity, which is a cylindrical resonator, are carefully designed and optimized with the time dependent finite element Maxwell equation solver. The azimuthal apertures are placed at the maximum magnetic field positions between the cavity and the applicator to maximize the coupling efficiency into the microwave plasma at a resonant frequency of 2.45 GHz. The system consists of a magnetron power supply, a circulator, a directional coupler, a three-stub tuner, a dummy load, a coaxial cavity, and a central cavity. Design and construction of the resonant structures and diagnostics of atmospheric plasma using optical experiments are discussed in various ranges of pressure and microwave input power for different types of gases.     

Dynamic adhesive force measurements under vertical and horizontal motions of interacting rough surfaces

An instrument to measure dynamic adhesive forces between interacting rough surfaces has been developed. It consists of four parts, namely, main instrument body, vertical positioning system with both micrometer and nanometer positioning accuracies, horizontal positioning system with nanometer positioning accuracy, and custom-built high-resolution, and high dynamic bandwidth capacitive force transducer. The vertical piezoelectric actuator (PZT) controls the vertical (approaching and retracting) motion of the upper specimen, while the horizontal PZT controls the horizontal (reciprocal) motion of the lower specimen. The force transducer is placed in line with the upper specimen and vertical PZT, and directly measures the adhesive forces with a root-mean-square load resolution of 1.7 microN and a dynamic bandwidth of 1.7 kHz. The newly developed instrument enables reliable measurements of near-contact and contact adhesive forces for microscale devices under different dynamic conditions. Using the developed instrument, dynamic pull-in and pull-off force measurements were performed between an aluminum-titanium-carbide sphere and a 10 nm thick carbon film disk sample. Three different levels of contact force were investigated; where for each contact force level the vertical velocity of the upper sample was varied from 0.074 to 5.922 microms, while the lower sample was stationary. It was found that slower approaching and retracting velocities result in higher pull-in and pull-off forces. The noncontact attractive force was also measured during horizontal movement of the lower sample, and it was found that the periodic movements of the lower disk sample also affect the noncontact surface interactions.     

Electron beam lithography-assisted fabrication of Au nano-dot array as a substrate of a correlated AFM and confocal Raman spectroscopy

This paper documents a study of an Au nano-dot array that was fabricated by electron beam lithography on a glass wafer. The patterns that had features of 100nm dots in diameter with a 2-mum pitch comprised a total area of 200x200mum(2). The dot-shaped Cr underlayer was open to the air after developing Poly(methyl methacrylate) (PMMA). When dipped into the Cr etchant, the exposed Cr layer was eliminated from the glass wafer in a short period of time. In order to ultimately fabricate the Ti/Au dot arrays, Ti and Au were deposited onto the arrays with a thickness of 2 and 40nm, respectively. The lift-off procedure was carried out in the Cr etchant using sonication in order to completely remove the residual Cr/PMMA layer. The fabricated Au nano-dot array was then immersed in an Ag enhancing solution and then into an ethanol solution containing (N-(6-(Biotinamido)hexyl)-3'-(2'-pyridyldithio)-propionamide (Biotin-HPDP). The substrate was analyzed using a correlated atomic force microscopy (AFM) and confocal Raman spectroscopy. Through this procedure, position-dependent surface-enhanced Raman spectroscopy (SERS) signals could be obtained.