Effect of Sediment Size Scaling on Physical Modeling of Bridge Pier Scour

Local pier scour experiments were performed in the laboratory to investigate the effect of relative sediment size on pier scour depth using three uniform sediment sizes and three bridge pier designs at different geometric model scales. When the data from a large number of experimental and field investigations are filtered according to a Froude number criterion, the effect of relative sediment size on dimensionless pier scour depth is brought into focus. The choice of sediment size in the laboratory model distorts the value of the ratio of pier width to sediment size in comparison with the prototype which in turn causes larger values of scour depth in the laboratory than in the field. This model distortion due to sediment size is shown to be related to the scaling of the large-scale unsteadiness of the horseshoe vortex by studying the relevant time scales of its coherent structure upstream of a bridge pier using acoustic Doppler velocimeter measurements. Observations of sediment movement, probability distributions of velocity components, and phase-averaging of velocity measured upstream of a bridge pier reveal properties of coherent motions that are discussed in terms of their contribution to the relationship between dimensionless pier scour depth and the ratio of pier width to sediment size over a large range of physical scales.     

Improved surface characteristics and the conductivity of polyaniline–nylon 6 fabrics by plasma treatment

The effect of plasma treatment on the surface characteristics and conductivity of polyaniline–nylon 6 composite fabrics was investigated. Plasma surface modifications with oxygen, ammonia, and argon were performed on the nylon 6 fabrics to improve the adhesion and rate of polymerization. The surface morphology of the fiber was observed with scanning electron microscopy, and functional groups introduced onto the surface of nylon 6 fibers by various plasma treatments were characterized by X‐ray photoelectron spectroscopy. With oxygen plasma treatment, the fiber surface was effectively etched; polar groups such as ? OH and ? OOH were introduced onto the surface of nylon 6 fiber, and they increased surface activity, promoted oxidation polymerization, and resulted in higher add‐on and electrical conductivity. However, the introduced amine and amide groups with ammonia treatment caused a reduction in conductivity. Argon did not significantly alter the surface characteristics of the nylon 6 fibers. In addition, to control fabric conductivity and cover as wide a range of conductivity as possible, we observed the effects of the monomer concentration and number of deposits on the fabric conductivity. The results showed that fabric conductivity increased as the monomer concentration increased up to 0.5M and then leveled off, and further increases were achieved with an increase in the number of multiple deposits. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 684–694, 2001     

Joint decoding and carrier phase recovery algorithm for turbo codes

In this letter, we investigate the sensitivity of the iterative maximum a posteriori probability (MAP) decoder to carrier phase offsets and propose simple carrier phase recovery algorithms operating within the iterative MAP decoding iterations. The algorithms exploit the information contained in the extrinsic values generated within the iterative MAP decoder to perform carrier recovery, thus requiring low hardware complexity     

Development of nanocrystals in an amorphous alloy Zr47Ni30Ti23

Development of nanocrystals during crystallization of an amorphous alloy Zr₄₇Ni₃₀Ti₂₃ is studied using differential scanning calorimetry (DSC), X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). Up on heating the amorphous ribbon in DSC, three exothermic peaks including a broad peak are observed. Stable nanocrystals embedded in the amorphous matrix form through primary crystallization. The nanocrystals have uniform sizes after prolonged annealing at 400°C for 180 minutes. Ni plays an important role for the stability of the nanocrystals. Due to the Ni partitioning between the nanocrystals and the residual matrix, the crystallization temperature (T _xI) of the residual amorphous matrix increases as crystallization proceeds. The formation of nanocrystal-amorphous composites that have high microstructural stability is possible through the controlled crystallization of the amorphous alloy Zr₄₇Ni₃₀Ti₂₃.     

A study on the formation and characteristics of the Si---O---C---H composite thin films with low dielectric constant for advanced semiconductor devices

The Si---O---C---H composite thin films were deposited on a p-type Si(100) substrate using bis-trimethylsilane (BTMSM) and O₂ mixture gases by an inductively coupled plasma chemical vapor deposition (ICPCVD). High density plasma of approximately 10¹² cm⁻³ is obtained at low pressure (<320 mtorr) with an RF power of approximately 300 W in the inductively coupled plasma source where the BTMSM and oxygen gases are greatly dissociated. Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) spectra show that the film has Si---CH₃ and O---H related bonds. The CH₃ groups formed the void in the film and the Si atoms in the annealed sample have different chemical states from those in the deposited sample. It means that the void is formed due to the removing of O---H related bonds during the annealing process. The relative dielectric constant of the annealed sample with the flow rate ratio O₂/BTMSM as 0.3 at 500°C for 30 min is approximately 2.5.     

A Low‐Cost Method to Evaluate Absorber Reflectivity Using an Antenna with a Small Radiating Aperture and Frequency‐Domain Instrument

We propose a way to measure the absorber reflectivity at a low cost. Only one simple antenna with a small radiating aperture and a frequency‐domain instrument are utilized. The previously used equation for calculating the reflectivity of an absorber is inaccurate, and, therefore, a new equation is derived based on multiple reflection analysis and three test models. Notably, the reflection coefficient of the antenna is included in the derived equation. The accuracy of the proposed method is proven through simulation and measurements. It can be easily applied to a product examination by absorber manufacturers and customers owing to its advantages of simplicity, cost effectiveness, and non‐cutting examination.     

Reverse‐Conducting IGBT Using MEMS Technology on the Wafer Back Side

In this paper, we present a 600‐V reverse conducting insulated gate bipolar transistor (RC‐IGBT) for soft and hard switching applications, such as general purpose inverters. The newly developed RC‐IGBT uses the deep reactive‐ion etching trench technology without the thin wafer process technology. Therefore, a freewheeling diode (FWD) is monolithically integrated in an IGBT chip. The proposed RC‐IGBT operates as an IGBT in forward conducting mode and as an FWD in reverse conducting mode. Also, to avoid the destructive failure of the gate oxide under the surge current and abnormal conditions, a protective Zener diode is successfully integrated in the gate electrode without compromising the operation performance of the IGBT.     

Assessment of a high-order discontinuous Galerkin method for vortex convection and wave propagation on unstructured meshes

A high-order accurate flow solver based on a discontinuous Galerkin method has been developed for the numerical simulation of vortex convection and wave propagation on unstructured meshes. To assess the performance of the present flow solver, a vortex convection problem in freestream and an acoustic benchmark problem were tested. An airfoil-vortex interaction problem was also simulated by coupling the flow solver with a dynamic mesh adaptation technique. From the mesh resolution test, the present fourth-order discontinuous Galerkin method almost perfectly preserves the vortex and also accurately resolves the acoustic waves on a mesh with an element size of half of characteristic length. It was also observed that the fourth-order method is more than ten times efficient, in terms of the number of degrees of freedom and the elapsed CPU time, compared to the second-order method.     

Antioxidant activities and contents of phytochemicals in methanolic extracts of specialty rice cultivars in Korea

Rice is an important agricultural commodity and a major staple food in Asian diets. The aims of this study were to investigate the antioxidant activities and phytochemical contents of methanolic extracts from specialty rice cultivars and to determine if there is any correlation between antioxidant activity and phytochemical content. Our results indicate that methanolic extracts from different rice cultivars contain different levels of phenolics, anthocyanin, carotenoids, γ-oryzanol, and vitamin E. Black rice cultivars such as ‘Heugkwang’, ‘Heugseol’, and ‘Heugjinju’ contained higher phytochemical contents compared to other cultivars. In contrast, the cultivars ‘Segyejinmi’, ‘Cheonseok’, ‘Hanareum’, and ‘Dasan 1’ contained significantly higher levels of γ-tocotrienol compared with other cultivars. The black rice cultivars also showed higher antioxidant activities. Phenolic content was positively correlated with DPPH and ABTS radical scavenging activities and reducing power. The results could have a direct impact on rice consumption by enhancing consumer awareness of health benefits of the rice.