Preparation of zeolitic adsorbents from waste coal fly ash

Power plants burning coal generate a large amount of fly ash as waste matter. The objective of this study is to produce zeolitic adsorbents that possesses high adsorptive capacity for toxic cations. The sample was first pretreated with a High Intensity Magnetic Separator for the removal of iron and magnetic materials (mainly Fe₂O₃ and TiO₂). The zeolitic adsorbents were prepared under the various conditions of NaOH concentration (1–5 N), reaction time from 3 to 96 hours and at the various temperatures of 60, 80 and 100°C. The results of the experiment showed that the coal fly ash should be synthesized with 4 N NaOH for 48 hours at 100°C in order to have good adsorptive capacity. The zeolitic adsorbents showed higher cation exchange capacity values than the natural zeolite in removing NH ₄ ⁺ , Pb²⁺, Ca²⁺and Cd²⁺ions.     

Control of NO x emissions from diesel engine by selective catalytic reduction (SCR) with urea

Topics in Catalysis - Among the catalysts screened, Cu-ion exchanged ZSM5 zeolite exhibited the highest NO removal activity, particularly at low reaction temperatures below 200 °C,...     

Crystallization and dissolution behavior of l(+) calcium and zinc lactate in ethanol-water solvent

Crystallization and dissolution behavior of L(+) calcium and zinc lactate in 50% ethanol-water solution was studied. The effects of stirring, standing, ultrasonic wave, and temperature on the crystallization of L(+) calcium and zinc lactate were evaluated. It was found that standing had a positive effect on crystallization of L(+) calcium and zinc lactate, while stirring promoted dissolution of crystallized particles and resulted in high residual concentration in mother liquor. The application of ultrasonic wave did not influence much on crystallization process. L(+) calcium and zinc lactate crystallized easily at 5 ‡C; however, complete crystallization took more than 72 hours. These two salts dissolved rapidly and reached equilibrium within 1 hour.     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Shear creep resistance of styrene–isoprene–styrene (SIS)‐based hot‐melt pressure‐sensitive adhesives

The effects of the properties of substrates and tackifier on the shear creep of SIS‐based HMPSAs were investigated. The holding power (t_b) and shear adhesion failure temperature (SAFT) were measured. The relationship between the complex viscosity and the holding power was examined. The holding power and SAFT values of the triblock SIS blends were higher than those of the diblock‐containing SIS blends, perhaps because blends using triblock SIS have higher crossover temperature and complex viscosity than those using diblock‐containing SIS. Higher levels of aromatic resin‐modified aliphatic tackifier and rosin ester were found to decrease the holding power of the HMPSAs. This maybe due to the fact that rosin ester and aromatic‐modified aliphatic resin are compatible with both the ends and midblocks of SIS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 825–831, 2006     

Ozonolysis of cyclododecene

Ozonolysis of cyclododecene was carried out to produce an w-formyl carboxylic acid (12-oxododecanoic acid) which is derived from zwitterion and aldehyde moiety that are formed during the reaction. The ozonolysis was performed to examine the product distribution under such reaction variables as temperature, kinds of solvent, and presence of catalyst. The yield of polymeric ozonide, which is undesirable product, was measured to be dominantly 86% without pyridine catalyst, whereas, only 10.25% with the catalyst. The optimum reaction condition was to be in MC (methylene chloride) solvent, and in the presence of equimolar olefin and pyridine catalyst at O°C, at which the yields of polymeric ozonide, 1,12-dodecanedialdehyde, 1,12-dodecanedicarboxylic acid, and 12-oxo-dodecanoic acid were 10.25%, 26.72%, 26.31%, and 36.72%, respectively.     

Viscosity effect in polyolefin ternary blends and composites

Ternary blends of PP (80) /rubber (EPM, EPDM) (10) / PE (10) and PP (80) / rubber (10) / CaCO₃ (10) composites were prepared in a twin-screw extruder. With polyethylene (PE) viscosity comparable to, or higher than that of rubber, the dispersed phase formed a reticulate structure with reduced size. On the contrary, when the viscosity of PE was significantly lower than that of rubber, the dispersed phase formed almost homogeneous morphology. With reticulate morphology, PE crystallinity content, hardness, modulus, and elongation at break of the ternary blend increased. In polypropylene (PP) / rubber / CaCO₃ composites, better dispersion of CaCO₃ in the PP matrix was obtained when the viscosity of rubber was significantly higher than that of matrix. With better dispersion, hardness and tensile properties were improved, but the impact strength more or less decreased. © 1993 John Wiley & Sons, Inc.     

Eddy characteristics on mass transfer close to free interface

The velocity fluctuations in the immediate vicinity of a free interface were measured with a hot film anemometer. And mass transfer rates and eddy exposure times were analyzed by using the method of deterministic approach. These mass transfer rates were compared with the mass transfer rates by means of concentration measurements in the air-water system. The eddy exposure time distributions obtained from velocity data were skewed toward the lower time value. The contribution of eddies wi:h small exposure time was increased as the liquid became more turbulent. The mass transfer rates were mainly contributed by the Prandtl size eddies and even larger eddies. The mass transfer predictions by the single eddy model employing a deterministic method were in good agreement with the experimental results by independent measurements of concentration.     

Biodegradability and mechanical properties of agro‐flour–filled polybutylene succinate biocomposites

The objective of this study was the production of rice husk flour (RHF) and wood flour (WF) filled polybutylene succinate (PBS) biocomposites as alternatives to cellulosic material filled conventional plastic (polyolefins) composites. PBS is one of the biodegradable polymers, made from the condensation reaction of 1,4‐butanediol and succinic acid that can be naturally degraded in the natural environment. We compared the mechanical properties between conventional plastics and agro‐flour–filled PBS biocomposites. We evaluated the biodegradability and mechanical properties of agro‐flour–filled PBS biocomposites according to the content and filler particle size of agro‐flour. As the agro‐flour loading was increased, the tensile and impact strength of the biocomposites decreased. As the filler particle size decreased, the tensile strength of the biocomposites increased but the impact strength decreased. The addition of agro‐flour to PBS produced a more rapid decrease in the tensile strength, notched Izod impact strength, and percentage weight loss of the biocomposites during the natural soil burial test. These results support the application of biocomposites as environmentally friendly materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1513–1521, 2005     

Preparation of nanosize Pt clusters using ion exchange of Pt(NH3) 4 2+ inside mesoporous channel of MCM-41

Mesoporous molecular sieve MCM-41 with a Si/Al ratio of 35 was obtained by hydrothermal synthesis using a gel mixture with a molar composition of 6 SiO₂0.1 Al₂O₃1 hexadecyltrimethylammonium chloride 0.25 dodecyltrimethylammonium bromide 0.25 tetrapropylammonium bromide0.15 (NH₄)₂O1.5 Na₂O300 H₂O. The MCM-41 sample was calcined in O₂ flow at 813 K and subsequently ion exchanged with Ca²⁺. A small Pt cluster has been supported on the MCM-41 sample following a procedure using ion exchange of Pt(NH₃) ₄ ²⁺ . The Pt(NH₃) ₄ ²⁺ ion supported on MCM-41 has been activated in O₂ flow at 593 K and subsequently reduced with Fh flow at 573 K, in the same way used for the preparation of a Pt cluster entrapped inside the supercage of zeolite NaY. The resulting Pt cluster supported on the MCM-41 shows hydrogen chemisorption oftotal two H atoms per Pt at 296 K (based on the total amount of Pt) and high catalytic activity for hydrogenolysis of ethane. The chemical shift in¹²⁹Xe NMR spectroscopy of adsorbed xenon indicates that the Pt cluster is located inside the mesoporous molecular sieve.