Symbiotic Dynamic Memory Balancing for Virtual Machines in Smart TV Systems

Smart TV is expected to bring cloud services based on virtualization technologies to the home environment with hardware and software support. Although most physical resources can be shared among virtual machines (VMs) using a time sharing approach, allocating the proper amount of memory to VMs is still challenging. In this paper, we propose a novel mechanism to dynamically balance the memory allocation among VMs in virtualized Smart TV systems. In contrast to previous studies, where a virtual machine monitor (VMM) is solely responsible for estimating the working set size, our mechanism is symbiotic. Each VM periodically reports its memory usage pattern to the VMM. The VMM then predicts the future memory demand of each VM and rebalances the memory allocation among the VMs when necessary. Experimental results show that our mechanism improves performance by up to 18.28 times and reduces expensive memory swapping by up to 99.73% with negligible overheads (0.05% on average).     

Simulation model for electron irradiated IGZO thin film transistors

An efficient drain current simulation model for the electron irradiation effect on the electrical parameters of amorphous In-Ga-Zn-O (IGZO) thin-film transistors is developed.The model is developed based on the specifications such as gate capacitance,channel length,channel width,flat band voltage etc.Electrical parameters of un-irradiated IGZO samples were simulated and compared with the experimental parameters and 1 kGy electron irradiated parameters.The effect of electron irradiation on the IGZO sample was analysed by developing a mathematical model.     

Sodium‐Ion Batteries: Building Effective Layered Cathode Materials with Long‐Term Cycling by Modifying the Surface via Sodium Phosphate

Surface stabilization of cathode materials is urgent for guaranteeing long‐term cyclability, and is important in Na cells where a corrosive Na‐based electrolyte is used. The surface of P2‐type layered Na_2/3[Ni_1/3Mn_2/3]O₂ is modified with ionic, conducting sodium phosphate (NaPO₃) nanolayers, ≈10 nm in thickness, via melt‐impregnation at 300 °C; the nanolayers are autogenously formed from the reaction of NH₄H₂PO₄ with surface sodium residues. Although the material suffers from a large anisotropic change in the c‐axis due to transformation from the P2 to O2 phase above 4 V versus Na⁺/Na, the NaPO₃‐coated Na_2/3[Ni_1/3Mn_2/3]O₂/hard carbon full cell exhibits excellent capacity retention for 300 cycles, with 73% retention. The surface NaPO₃ nanolayers positively impact the cell performance by scavenging HF and H₂O in the electrolyte, leading to less formation of byproducts on the surface of the cathodes, which lowers the cell resistance, as evidenced by X‐ray photoelectron spectroscopy and time‐of‐flight secondary‐ion mass spectroscopy. Time‐resolved in situ high‐temperature X‐ray diffraction study reveals that the NaPO₃ coating layer is delayed for decomposition to Mn₃O₄, thereby suppressing oxygen release in the highly desodiated state, enabling delay of exothermic decomposition. The findings presented herein are applicable to the development of high‐voltage cathode materials for sodium batteries.     

3D Printed Stem‐Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds

A bioengineered spinal cord is fabricated via extrusion‐based multimaterial 3D bioprinting, in which clusters of induced pluripotent stem cell (iPSC)‐derived spinal neuronal progenitor cells (sNPCs) and oligodendrocyte progenitor cells (OPCs) are placed in precise positions within 3D printed biocompatible scaffolds during assembly. The location of a cluster of cells, of a single type or multiple types, is controlled using a point‐dispensing printing method with a 200 µm center‐to‐center spacing within 150 µm wide channels. The bioprinted sNPCs differentiate and extend axons throughout microscale scaffold channels, and the activity of these neuronal networks is confirmed by physiological spontaneous calcium flux studies. Successful bioprinting of OPCs in combination with sNPCs demonstrates a multicellular neural tissue engineering approach, where the ability to direct the patterning and combination of transplanted neuronal and glial cells can be beneficial in rebuilding functional axonal connections across areas of central nervous system (CNS) tissue damage. This platform can be used to prepare novel biomimetic, hydrogel‐based scaffolds modeling complex CNS tissue architecture in vitro and harnessed to develop new clinical approaches to treat neurological diseases, including spinal cord injury.     

Graphene-Based Ultralight Compartmentalized Isotropic Foams with an Extremely Low Thermal Conductivity of 5.75 mW m−1 K−1

The importance of high-performance thermal insulation materials is rapidly emerging due to energy conservation and the management of temperature-sensitive device perspectives. Recent thermal insulation materials including complex structures have been developed either by reducing the structural connectivity to mitigate thermal transport through solid conduction or forming directionally aligned confined inner pores to suppress the internal gas convection. In this study, to create a highly efficient thermal insulating material that suppresses thermal transport in all directions, graphene-based anisotropic closed-cellular structures (CCS) are devised with a highly ordered assembly of hollow compartments with extremely thin walls (≈50 nm). This uniquely designed CCS made from microfluidically synthesized graphene solid bubbles exhibited a remarkably low thermal conductivity of 5.75 mW m⁻¹ K⁻¹ thanks to effective suppression of both solid conduction and gas conduction/convection. Therefore, the proposed strategy in this work offers a novel toolkit for implementing next-generation high-performance insulation materials.     

Charge‐Generating Mode Control in High‐Performance Transparent Flexible Piezoelectric Nanogenerators

In this work, we demonstrate the mode transition of charge generation between direct‐current (DC) and alternating‐current (AC) from transparent flexible (TF) piezoelectric nanogenerators (NGs), which is dependent solely on the morphology of zinc oxide (ZnO) nanorods without any use of an AC/DC converter. Tilted ZnO nanorods grown on a relatively low‐density seed layer generate DC‐type piezoelectric charges under a pushing load, whereas vertically aligned ZnO nanorods on a relatively high‐density seed layer create AC‐type charge generation. The mechanism for the geometry‐induced mode transition is proposed and characterized. We also examine the output performance of TF‐NGs which employ an indium zinc tin oxide (IZTO) film as a TF electrode. It is demonstrated that an IZTO film has improved electrical, optical, and mechanical properties, in comparison with an indium tin oxide (ITO) film. Enhanced output charge generation is observed from IZTO‐based TF‐NGs when TF‐NGs composed of only ITO electrodes are compared. This is attributed to the higher Schottky barrier and the lower series resistance of the IZTO‐based TF‐NGs. Thus, by using IZTO, we can expect TF‐NGs with superior mechanical durability and power generating performance.     

High‐Performance Micro‐Solid Oxide Fuel Cells Fabricated on Nanoporous Anodic Aluminum Oxide Templates

Micro‐solid oxide fuel cells (μ‐SOFCs) are fabricated on nanoporous anodic aluminum oxide (AAO) templates with a cell structure composed of a 600‐nm‐thick AAO free‐standing membrane embedded on a Si substrate, sputter‐deposited Pt electrodes (cathode and anode) and an yttria‐stabilized zirconia (YSZ) electrolyte deposited by pulsed laser deposition (PLD). Initially, the open circuit voltages (OCVs) of the AAO‐supported μ‐SOFCs are in the range of 0.05 V to 0.78 V, which is much lower than the ideal value, depending on the average pore size of the AAO template and the thickness of the YSZ electrolyte. Transmission electron microscopy (TEM) analysis reveals the formation of pinholes in the electrolyte layer that originate from the porous nature of the underlying AAO membrane. In order to clog these pinholes, a 20‐nm thick Al₂O₃ layer is deposited by atomic layer deposition (ALD) on top of the 300‐nm thick YSZ layer and another 600‐nm thick YSZ layer is deposited after removing the top intermittent Al₂O₃ layer. Fuel cell devices fabricated in this way manifest OCVs of 1.02 V, and a maximum power density of 350 mW cm^?2 at 500 °C.     

Software-defined optical networks (SDONs): a survey

This paper gives an overview of software-defined optical networks (SDONs). It explains the general concepts on software-defined networks (SDNs), their relationship with network function virtualization, and also about OpenFlow, which is a pioneer protocol for SDNs. It then explains the benefits and challenges of extending SDNs to multilayer optical networks, including flexible grid and elastic optical networks, and how it compares to generalized multi-protocol label switching for implementing a unified control plane. An overview on the industry and research efforts on SDON standardization and implementation is given next, to bring the reader up to speed with the current state of the art in this field. Finally, the paper outlines the benefits achieved by SDONs for network operators, and also some of the important and relevant research problems that need to be addressed.     

External force of snake: virtual electric field

Gradient vector flow (GVF) is an external force of snake that overcomes traditional snake's problems: limited capture range and poor convergence to concave boundaries. A new external force with the same properties as the GVF is proposed. The proposed method has much shorter computational time than the GVF.     

A Structural Investigation of CdTe(001) Thin Films on GaAs/Si(001) Substrates by High-Resolution Electron Microscopy

Epitaxial CdTe thin films were grown on GaAs/Si(001) substrates by metalorganic chemical vapor deposition using thin GaAs as a buffer layer. The interfaces were investigated using high-resolution transmission electron microscopy and geometric phase analysis strain mapping. It was observed that dislocation cores exist at the CdTe/GaAs interface with periodic distribution. The spacing of the misfit dislocation was measured to be about 2?nm, corresponding to the calculated spacing of a misfit dislocation (2.6?nm) in CdTe/Si with Burgers vector of a[110]/2. From these results, it is suggested that the GaAs buffer layer effectively absorbs the strain originating from the large lattice mismatch between the CdTe thin film and Si substrate with the formation of periodic structural defects.