A timing controller embedded driver IC with 3.24‐Gbps eDP interface for chip‐on‐glass TFT‐LCD applications

This paper presents a timing controller embedded driver (TED) IC with 3.24‐Gbps embedded display port (eDP), which is implemented using a 45‐nm high‐voltage CMOS process for the chip‐on‐glass (COG) TFT‐LCD applications. The proposed TED‐IC employs the input offset calibration scheme, the zero‐adjustable equalizer, and the phase locked loop‐based bang‐bang clock and data recovery to enhance the maximum data rate. Also, the proposed TED‐IC provides efficient power management by supporting advanced link power management feature of eDP standard v1.4. Additionally, the smart charge sharing is proposed to reduce the dynamic power consumption of output buffers. Measured result demonstrates the maximum data rate of 3.24 Gbps from a 1.1 V supply voltage with a 7.9‐inch QXGA 60‐Hz COG‐LCD prototype panel and 44% power saving from the display system.     

Inertial effects on cylindrical particle migration in linear shear flow near a wall

Micro-/nanoparticle-based systems are regarded as one of the possible candidates due to the engineerability and multifunctionality to maximize the accumulation of the nano-/microparticle-based drug delivery system on the target. Recent advances in nanotechnology enable the fabrication of diverse particle shapes from simple spherical particles to more complex shapes. The particle dynamics in blood flow and endocytosis characteristics of non-spherical particles change as the non-sphericity effect increases. We used a numerical approach to investigate the particle dynamics in linear shear flow near a wall. We examined the dynamics of slender cylindrical particles with aspect ratio γ = 5.0 in terms of particle trajectory, velocity, and force variation for different Stokes numbers over time. We identified the rotating inertia of particle near a wall as the source of inertial migration toward the wall. The drift velocity of slender cylindrical particles is comparable to that of discoidal particles. We discuss the possibilities and limitations of using slender cylindrical particles as a drug delivery system.     

Developing and Verifying a Questionnaire for Evaluating User Value of a Mobile Device

User experience has become a major issue lately with user value as one of its key elements. This study proposes a method to evaluate user value using a questionnaire specialized for a mobile device such as smartphones. The questionnaire was developed considering elements of user value, product features, and context of use. Then, a case study with hundreds of participants was conducted via the Internet to verify and screen out questionnaire items in terms of reliability and validity. Finally, a total of 16 questionnaire items were selected for evaluating elements of user value, consisting of self‐satisfaction, pleasure, sociability, customer need, and attachment. The results of this study are expected to help understand potential users and select design alternatives.     

A study on effects of security risks on acceptance of enterprise cloud service: moderating of employment and non-employment using PLS multiple group analysis

This paper analyzed the effects of security risk factors fit for cloud computing paradigm on the acceptance of enterprise cloud service with intent to illuminate the factors for vitalizing the adoption of corporate cloud services in the future. The acceptance intention was set as a dependent variable. Independent variables were set in reference to the technology acceptance theory. Security risks were categorized into compliance risk, information leakage risk, troubleshooting risk and service discontinuation risk to design a model for analysis.     

Measurement feedback control for a class of feedforward nonlinear systems

We propose a measurement feedback controller for a class of feedforward nonlinear systems under sensor noise. The sensor noise has unknown magnitude, frequency, and phase. Our proposed controller is coupled with a low‐pass filter in such a way that the sensor noise is attenuated. We show that the controlled system results in bounded states whose ultimate bounds are inversely proportional to the minimum frequency of the sensor noise. Our result is further generalized to work in a case where the sensor noise is only required to have a Fourier transform with finite energy. Moreover, if the sensor noise enters only at partial states, depending on the location of the sensor noise, the ultimate bounds of the particular states can be made arbitrarily small via the gain factor of the controller. Copyright © 2012 John Wiley & Sons, Ltd.     

Optimal scheduling of a communication channel for the centralized control of a platoon of vehicles

This paper proposes an off-line optimal channel scheduling algorithm for an interconnected vehicle control system. The optimal sequence obtained through the scheduling algorithm provides a switching controller with the best switching order if the controller can access only one plant at each time slot over the shared communication medium. Interconnected systems require the string stability as well as the dynamic stability of each unit. This paper shows that integrating the simple string stable control law with the approximately optimal linear-quadratic (LQ) tracker gives the optimal channel scheduling algorithm.     

Effects of wheelchair-based rehabilitation on the physical functions and health perception of stroke patients

The purpose of this study was to investigate the effect of wheelchair-based rehabilitation on the physical functions, health perception, and blood lipids according to the length of time since the stroke. Wheelchair-based rehabilitation progressed for 60 min per session, five times per week for 6 weeks. Physical functions, health perception (SF-36), and blood lipids were measured before and after rehabilitation. Physical fitness for physical function such as agility, grip strength, lower-body muscular endurance, flexibility, and posture control significantly improved after 6 weeks of rehabilitation. Health perception improved significantly with physical and mental health according to time since the stroke occurred. Overall, 6 weeks of wheelchair-based rehabilitation had a positive effect on the physical function and health perception regardless of stroke duration. Wheelchair-based rehabilitation had a more positive effect on the physical functions and health perception on the patients who suffered their stroke most recently. We suggested that wheelchair-based rehabilitation is necessary even through wheelchair based for chronic stroke patients, and it was useful their improved of quality of life.     

Replication of nanostructures on microstructures by intermediate film mold inserted hot embossing process

The present study proposes a simple method to replicate nano/micro combined multiscale structures using an intermediate film mold and anodic aluminum oxide (AAO) nanomold in hot embossing process. The proposed method is simply to add an intermediate film mold with microscale thru-hole patterns to the ordinary mold system, on which nanostructures are patterned, in the hot embossing process. The intermediate film mold is inserted between polymer substrate and AAO nanomold. During the hot embossing process, the polymer first fills microscale thru-hole patterns in the intermediate film mold and subsequently fills nanopores in AAO nanomold, resulting in the nano/micro combined structures. The intermediate film molds, which have microscale thru-hole patterns were fabricated by micro-milling, laser ablation, etching methods and/or LIGA process. The nano/micro combined structures were successfully replicated by the proposed method.     

Collapse-free thermal bonding technique for large area microchambers in plastic lab-on-a-chip applications

Bonding is an essential step to form microchannels or microchambers in lab-on-a-chip applications. In this paper, we present a novel plastic thermal bonding technique to seal and form large area microchambers (planar characteristic width and length on the order of 1 mm and characteristic thickness on the order of 10–100 μm) without collapse by introducing a holed pressure equalizing plate (HPEP) that includes holes of the same size and shape as the microchambers. To demonstrate the proposed technique, two types of large area microchambers [(1) 20 × 10 mm and 40 μm thick and (2) 12 × 2.5 mm and 120 μm thick] with microchannels were designed and replicated on plastic substrates by means of hot embossing and injection molding processes with prepared two nickel mold inserts. The replicated large area microchambers as well as the microchannels in the plastic lab-on-a-chip were successfully sealed (i.e., no leakage) and formed without any collapse by the proposed thermal bonding technique with the help of the HPEP.     

Ambient‐light sensor system with wide dynamic range enhanced by adaptive sensitivity control

Abstract— A new digital ambient‐light sensor system is presented which employs two linear light sensors with different sensitivities and automatically adjusts the sensitivity based on the illumination condition. The adaptation mechanism allows a very wide range of light intensity to be detected, and the input dynamic range of the system is substantially improved from 22.5 to 45.1 dB. The proposed method does not require any additional precision bits for output data. Due to the small number of the output bits and the simple conversion process, the system can be easily integrated on the display panel.