Integrated carbon composite bipolar plate for polymer–electrolyte membrane fuel cells

The electrical resistance of bipolar plates for polymer–electrolyte membrane fuel cells (PEMFCs) should be very low to conduct the electricity generated with minimum electrical loss. The resistance of a bipolar plate consists of the bulk material resistance and the interfacial contact resistance when two such plates are contacted to provide channels for fuel and air (oxygen) supplies.     

Morphology effect on the transferred charges in triboelectric nanogenerators: Numerical study using a finite element method

The structural shape of the interface between a metal and dielectric material in a triboelectric nanogenerator (TENG) is an important factor that can improve the device performance. Many interfacial structures have been developed to improve the TENG performance. However, there have been very few studies on the numerical interpretation of various types of contact interfaces. For various interfacial structures on which uniform triboelectric charge density is distributed, the surface charge density (in-plane, out-of-plane, and total) is systematically analyzed to predict the quantity of the transferred charges on the bottom metal under a short-circuit condition. In this work, a numerical study is conducted using a finite element method. The numerical results confirm that the increase in the quantity of the transferred charges collected on the bottom metal via electrostatic induction is related to the increase in the area of the surface structures (i.e., surface enlargement effect due to the formation of complex interfacial morphology). The estimated magnitude of the transferred charges shows the following decreasing trend for the various structural shapes: rectangle > cylinder > pyramid > cone > flat.     

Cooperative communication system for high performance using ambient signals

This paper proposes the Internet connectivity of RF-powered devices in the backscatter system. The RF-powered devices do not use a battery and charge energy by harvesting from ambient RF signals of TV, a cellular phone and Wi-Fi devices. The Internet connectivity of the RF-powered devices in the backscatter system is very useful in Internet of things technology because the RF-powered devices which are called to a tag have a small size by the harvesting from ambient RF signals without a battery. This paper proposes a method improving the communication performance of the Wi-Fi backscatter system by applying the cooperative communication scheme.

     

Controlling Horizontal Dipole Orientation and Emission Spectrum of Ir Complexes by Chemical Design of Ancillary Ligands for Efficient Deep‐Blue Organic Light‐Emitting Diodes

Deep‐blue emitting Iridium (Ir) complexes with horizontally oriented emitting dipoles are newly designed and synthesized through engineering of the ancillary ligand, where 2′,6′‐difluoro‐4‐(trimethylsilyl)‐2,3′‐bipyridine (dfpysipy) is used as the main ligand. Introduction of a trimethylsilyl group at the pyridine and a nitrogen at the difluoropyrido group increases the bandgap of the emitter, resulting in deep‐blue emission. Addition of a methyl group (mpic) to a picolinate (pic) ancillary ligand or replacement of an acetate structure of pic with a perfluoromethyl‐triazole structure (fptz) increases the horizontal component of the emitting dipoles in sequence of mpic (86%) > fptz (77%) > pic (74%). The organic light‐emitting diode (OLED) using the Ir complex with the mpic ancillary ligand shows the highest external quantum efficiency (31.9%) among the reported blue OLEDs with a y‐coordinate value lower than 0.2 in the 1931 Commission Internationale de L'Eclairage (CIE) chromaticity diagram.     

Iterative Self-Interference Mitigation in Full-Duplex Wireless Communications

Wireless Personal Communications - This paper considers a full-duplex wireless communication system in which detection of the desired signal is hindered not only by the self-interference (SI), but...     

Characterization of petroleum-degrading bacteria from oil-contaminated sites in Vietnam

Four petroleum-degrading bacterial strains, 2TN-NB, 6TBX-CL, MVK2-5, and XCK, were isolated from various oil-contaminated sites in Vietnam. Determination of the nucleotide sequence of the gene encoding 16S rRNA allowed 2TN-NB to be identified as Acinetobacter sp. and the other three stains as Pseudomonas sp. Among the four isolates, 2TN-NB was most effective in degrading crude oil: in 1 d, it degraded 95% of the crude oil in the culture medium (5%, v/v). The isolated strains could also degrade a sulfur-containing aromatic hydrocarbon, dibenzothiophene (DBT), with low efficiency. Except for MVK2-5, which degraded crude oil least efficiently, the isolates produced biosurfactants in amounts sufficient for structural analysis. FT-IR measurement suggested that strains 6TBX-CL and XCK produced glycolipid-type biosurfactants while that produced by 2TN-NB was of the polysaccharide type.     

Metalloendopeptidase ADAM-like Decysin 1 (ADAMDEC1) in Colonic Subepithelial PDGFRα+ Cells Is a New Marker for Inflammatory Bowel Disease

Metalloendopeptidase ADAM-Like Decysin 1 (ADAMDEC1) is an anti-inflammatory peptidase that is almost exclusively expressed in the gastrointestinal (GI) tract. We have recently found abundant and selective expression of Adamdec1 in colonic mucosal PDGFRα⁺ cells. However, the cellular origin for this gene expression is controversial as it is also known to be expressed in intestinal macrophages. We found that Adamdec1 mRNAs were selectively expressed in colonic mucosal subepithelial PDGFRα⁺ cells. ADAMDEC1 protein was mainly released from PDGFRα⁺ cells and accumulated in the mucosal layer lamina propria space near the epithelial basement membrane. PDGFRα⁺ cells significantly overexpressed Adamdec1 mRNAs and protein in DSS-induced colitis mice. Adamdec1 was predominantly expressed in CD45⁻ PDGFRα⁺ cells in DSS-induced colitis mice, with only minimal expression in CD45⁺ CD64⁺ macrophages. Additionally, overexpression of both ADAMDEC1 mRNA and protein was consistently observed in PDGFRα⁺ cells, but not in CD64⁺ macrophages found in human colonic mucosal tissue affected by Crohn’s disease. In summary, PDGFRα⁺ cells selectively express ADAMDEC1, which is localized to the colon mucosa layer. ADAMDEC1 expression significantly increases in DSS-induced colitis affected mice and Crohn’s disease affected human tissue, suggesting that this gene can serve as a diagnostic and/or therapeutic target for intestinal inflammation and Crohn’s disease.     

Synthesis and properties of styrene–EPDM–vinyl acetate graft polymer

The styrene–EPDM–vinylacetate (SEV) graft polymer, which linked respectively the styrene (St) unit and vinylacetate the (VAc) unit to the ethylene–propylene–diene terpolymer (EPDM) backbone was synthesized by two‐step graft polymerizations: First the graft polymerization of VAc onto EPDM was carried out, and then St was added successively in the prepolymerized solution and further polymerized for a given period to obtain SEV. The effects of concentration of EPDM and an initiator, mole ratio of VAc to St, polymerization time, temperature, and solvent were examined on the graft polymerizations. The synthesized graft polymers (SEVs) that have different contents of St or VAc were identified by Fourier transform IR spectrum. The highest graft ratio has been obtained by 10 wt % of EPDM, 1.0 mole ratio of VAc to St, and 1.0 wt % of BPO in toluene for 48 h at 70°C. The glass transition temperature of SEV is lower than that of poly(vinyl acetate) (PVAc) and polystyrene (PS). The thermal stability of SEV is higher than that of PVAc, PS, and the acrylonitrile–butadiene–styrene (ABS) resin. The tensile strength of SEV was improved as compared with that of EPDM. The light resistance and weatherability of SEV were better than those of ABS. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2296–2304, 2000     

Fracture mechanics investigation on the PP/EPDM/ionomer ternary blends using j-integral by locus method

The fracture mechanics investigation of the polypropylene (PP)/ethylene–propylene–diene terpolymer (EPDM)/ionomer ternary blends was performed in terms of the J-integral by measuring fracture energy via the locus method. Blends were prepared in a laboratory internal mixer. The composition of PP and EPDM was fixed at a 50/50 ratio by weight. Two kinds of Poly(ethylene-co-methacrylic acid) (EMA) ionomers were used. The J-integral value at crack initiation, Jc, of the PP/EPDM/EMA ionomer ternary blends were affected by the cation types (Na⁺ or Zn²⁺) and contents (5–20 wt %) of the added EMA ionomers. The ternary blend having 5 wt % of Na-neutralized ionomer showed a higher Jc value than that of any other ternary blends. The results were discussed with regard to the fracture topology by a scanning electron microscope (SEM). © 1994 John Wiley & Sons, Inc.