Group-Scheduling for Multi-Service Optical Burst Switching (OBS) Networks

We propose a new burst scheduling mechanism for Optical Burst-Switched (OBS) networks. The new approach is made possible by gathering data bursts into groups and performing the scheduling decision for each group collectively. In OBS group-scheduling, bursts will not be considered for scheduling until a pre-defined time period elapses, during which the group of burst header packets would be gathered. By transforming a set of data bursts into a set of corresponding time intervals, the problem of scheduling these bursts is transformed into a combinatorial optimization problem. Graph algorithms are applied to obtain the maximum number of non-overlapping bursts. The proposed OBS group-scheduling scheme is shown to improve the performance of OBS networks over existing scheduling schemes in terms of burst loss probability and channel utilization. With an extension through a sequential optimization, using a Branch-and-Bound technique, the proposed scheme can support multiple classes of service. It is shown that the new scheduling approach has several desired characteristics including fairness and service differentiability among classes in terms of burst loss probability and channel utilization.     

Development of intracranial brain-computer interface system using non-motor brain area for series of motor functions

An intracranial brain-computer interface (BCI) system using the neuronal activity of a non-motor brain area to fulfil a series of motor functions has been developed. The presented BCI system encodes a series of motor functions into a small number of neuronal units of the primary somatosensory cortex of a rat and generates real-time command signals to control a machine according to the animal's motor intentions. The results of this study demonstrate the practical usability of the BCI system using a non-motor brain area in the field of rehabilitation.     

Stator-flux-oriented control of induction motor considering ironloss

Research to consider the influences of iron loss has been made in the vector control of an induction motor. However, little work has been done in the area of a stator-flux-oriented control system of an induction motor. This paper investigates the effects of iron loss in the direct stator-flux-oriented control system of an induction motor, and proposes a control algorithm considering iron loss. The iron loss is modeled by equivalent iron loss resistance in parallel to the magnetizing inductance. Torque control capability is much improved and the speed estimation error for a speed-sensorless drive is reduced by the proposed control algorithm. The effectiveness of the proposed method is verified by simulation and experimental results     

Latch Applicator for Efficient Delivery of Dissolving Microneedles Based on Rapid Release of Elastic Strain Energy by Thumb Force (Adv. Funct. Mater. 11/2023)

Dissolving microneedle (DMN) is an attractive alternative to parenteral and enteral drug administration owing to its painless self-administration and safety due to non-generation of medical waste. For reproducible and efficient DMN administration, various DMN application methods, such as weights, springs, and electromagnetic devices, have been studied. However, these applicators have complex structures that are complicated to use and high production costs. In this study, a latch applicator that consists of only simple plastic parts and operates via thumb force without any external complex device is developed. Protrusion-shaped latches and impact distances are designed to accumulate thumb force energy through elastic deformation and to control impact velocity. The optimized latch applicator with a pressing force of 25 N and an impact velocity of 5.9 m s⁻¹ fully inserts the drug-loaded tip of the two-layered DMN into the skin. In an ovalbumin immunization test, DMN with the latch applicator shows a significantly higher IgG antibody production rate than that of intramuscular injection. The latch applicator, which provides effective DMN insertion and a competitive price compared with conventional syringes, has great potential to improve delivery of drugs, including vaccines.     

Ag Nanowire Reinforced Highly Stretchable Conductive Fibers for Wearable Electronics

Stretchable conductive fibers have received significant attention due to their possibility of being utilized in wearable and foldable electronics. Here, highly stretchable conductive fiber composed of silver nanowires (AgNWs) and silver nanoparticles (AgNPs) embedded in a styrene–butadiene–styrene (SBS) elastomeric matrix is fabricated. An AgNW‐embedded SBS fiber is fabricated by a simple wet spinning method. Then, the AgNPs are formed on both the surface and inner region of the AgNW‐embedded fiber via repeated cycles of silver precursor absorption and reduction processes. The AgNW‐embedded conductive fiber exhibits superior initial electrical conductivity (σ₀ = 2450 S cm^?1) and elongation at break (900% strain) due to the high weight percentage of the conductive fillers and the use of a highly stretchable SBS elastomer matrix. During the stretching, the embedded AgNWs act as conducting bridges between AgNPs, resulting in the preservation of electrical conductivity under high strain (the rate of conductivity degradation, σ/σ₀ = 4.4% at 100% strain). The AgNW‐embedded conductive fibers show the strain‐sensing behavior with a broad range of applied tensile strain. The AgNW reinforced highly stretchable conductive fibers can be embedded into a smart glove for detecting sign language by integrating five composite fibers in the glove, which can successfully perceive human motions.     

Empirical analysis of strategy selection for the technology leading and technology catch-up in the IT industry

R&D strategies of companies with low and high technological levels are discussed based on the concept of technology convergence and divergence. However, empirically detecting enterprise technology convergence in the distribution of enterprise technology (total productivity increase) over time and identifying key change factors are challenging. This study used a novel statistical indicator that captures the internal technology distribution change with a single number to clearly measure the technology distribution peak as a change in critical bandwidth for enterprise technology convergence and presented it as evidence of each technology convergence or divergence. Furthermore, this study applied the quantitative technology convergence identification method. Technology convergence appeared from the separation of total corporate productivity distribution of 69 IT companies in Korea in 2019–2020 rather than in 2015–2016. Results indicated that when the total technological level was separated from the technology leading and technology catch-up, IT companies were found to be pursuing R&D strategies for technology catch-up.     

A gain-clamped SOA with distributed Bragg reflectors fabricated under both ends of active waveguide with different lengths

We demonstrate a gain-clamped semiconductor optical amplifier (GC-SOA) which has gratings under both end regions of an active waveguide. Two gratings of the new GC-SOA are fabricated in different lengths. Their lasing modes and gain characteristics are measured and analyzed with different combinations of grating lengths. It shows different gain and noise characteristics according to the measurement direction in asymmetric grating combinations.     

Electrical and optical properties of deep-red top-surface-emittinglasers

By studying thermal behavior of all-MBE surface-emitting lasers, barrier heights and optimum cavity design parameters are obtained. The barrier heights for holes between hetero-interfaces of Al_0.3Ga_0.7As-Al_0.65Ga_0.35As and AlAs-Al_0.65Ga_0.35As (Δx=-0.35) are measured to be 77 meV at zero bias for the deep-red top-surface-emitting laser. The barrier height decreases linearly with forward bias voltage, explaining the nonlinearity in current-voltage characteristics of the top-surface-emitting laser. The contribution of electrons to electrical resistance is estimated to be negligibly small compared to that of holes for the structure consisting of Δ_x =0.35. Minimum threshold current and maximum differential quantum efficiency observed around 200 K indicate slight mismatch between gain maximum and Fabry-Perot resonance for the deep-red top-surface-emitting laser     

An uplink CDMA system architecture with diverse QoS guarantees forheterogeneous traffic

The uplink access control problems for cellular code-division multiple-access (CDMA) systems that service heterogeneous traffic with various types of quality-of-service (QoS) and use multicode CDMA to support variable bit rates are addressed. Considering its distinct QoS requirements, class-I real-time traffic (e.g., voice and video) is differentiated from class-II non-real-time traffic (e.g., data). Connection-oriented transmission is achieved by assigning mobile-oriented code channels for class-I traffic, where each corresponding mobile needs to pass an admission test. Class-II traffic is transmitted in a best-effort manner through a transmission-rate request access scheme which utilizes the bandwidth left unused by class-I traffic. Whenever a mobile has class-II messages to transmit, the mobile requests code channels via a base station-oriented transmission-request code channel, then, according to the base station scheduling, the transmission is scheduled and permitted. Addressed are the admission test for class-I connections, transmission power allocation, and how to maximize the aggregate throughput for class-II traffic. The admission region of voice and video connections and the optimum target signal-to-interference ratio of class-II traffic are derived numerically. The performance of class-II traffic transmissions in terms of average delay is also evaluated and discussed     

ATM switch with distributed queue windowing scheme

The input queueing switch can be enhanced using a non-first come-first-service (non-FCFS) discipline like window scheme. However, large window sizes are not feasible in centralised contention resolution algorithms due to the increased internal bit rate. Based on the distributed queue concept, a new window scheme for the ATM switch is proposed where the window size can be easily extended. The proposed scheme does not require that the scheduling hardware be speeded up in proportion to the window size, which is essential in the conventional window scheme