Lamellar thickening behaviour of nylon-6,6 crystal by annealing

Nylon-6,6 — a typical polyamide — was annealed in the swollen state in glycerol to promote the partial melting of the polymer crystal. The recrystallization or lamellar thickening of nylon-6,6 crystal following partial melting was easily induced by this annealing, and the lamellar thickness of the crystal increased stepwise by $\text{1}\text{2}$ monomer unit length with increasing annealing temperature or annealing time. In addition, another distinct layer-thickening mechanism was observed which led to approximately doubling (and frequently quadrupling) the straight stem length of the lamellar crystal for all samples annealed under adequate conditions. New melting endotherms corresponding to these layer thicknesses (range of long spacings 140–180Å) were obtained by differential scanning calorimetry (d.s.c.) at temperatures ranging from 270° to 282°C. The mechanism of lamellar thickening is discussed with reference to the experimental results.     

Simulation of catalytic fluidized bed reactors by a transient axial dispersion model with invariant physical properties and nonlinear chemical reactions

This paper presents a transient axial dispersion model for an isothermal, catalytic fluidized bed reactor, which is frequently employed in synthetic production processes including coal gasification and liquefaction. A non-linear chemical reaction is considered to occur in the reactor. This model of a fluidized bed reactor takes into account the axial dispersion in the three phases, bubble, cloud-wake and emulsion. The physical properties along the axial coordinate are invariant in the model. Transient characteristics of the gas reactant, and the length of the transient period have been examined based on the model. The model compares favorably with experimental data in the steady state condition.     

A comprehensive study on co2-interphase mass transfer in vertical cocurrent and countercurrent gas-liquid flow

Cocurrent and countercurrent absorption and desorption of CO₂ in water was investigated in tall bubble columns (length 440 and 720 cm, diameter 15 and 20 cm, respectively). Operating conditions were applied which provided for high interphase mass transfer rates. Under these circumstances the relative gas holdup varies considerably with axial position whereas the mean bubble diameter measured at two points was found to be approximately constant. The measured data permit the calculation of local values of interfacial areas, superficial gas velocities, and frequency factors for bubble coalescence and break up. A dispersion model which takes into account the hydrostatic head and a variable gas velocity was applied to describe the measured concentration profiles in both phases. If increased mass transfer coefficients at the column bottom and measured local values of the hold up were used a striking agreement between experimental and predicted profiles could be obtained. The findings lead to a more sophisticated picture of the complex behaviour of gas-liquid dispersions at high interphase mass transfer rates.     

Engineering of functional supramacromolecular complexes of proteins (enzymes) using reversed micelles as matrix microreactors

The size of the inner water cavity of reversed micelles formedin a triple system ‘water-surfactant-organic solvent’can be widely varied by changing the degree of surfactant hydration.This gives grounds to use reversed micelles as matrix microreactorsfor the design of supramolecular complexes of proteins. Usingultracentrifugation analysis, it has been demonstrated thatthe oligomeric composition of various enzymes (ketoglutaratedehydrogenase, alkaline phosphatase, lactic dehydrogenase, glyceraldehyde-3-phosphatedehydrogenase) solubilized in reversed micelles of Aerosol OT[sodium bis(2-ethylehexyl)sulfosuccinate] in octane changesupon variation of the degree of hydration. An oligomeric complexforms under conditions when the radius of the micelle innercavity is big enough to incorporate this complex as a whole.At lower degrees of hydration the micelles ‘uncouple’such complexes to their components. The catalytic propertiesof various oligomeric complexes have been studied. Possibilitiesof using reversed micelles for the separation of subunits ofoligomeric enzymes under non-denaturating conditions have beendemonstrated. In particular, the isolated subunits of alkalinephosphatase, lactic dehydrogenase and glyceralde-hyde-3-phosphatedehydrogenase have been found to be active in Aerosol OT reversedmicelles. The dependences of the catalytic activity of oligomericenzymes represent saw-like curves. The maxima of the catalyticactivity observed at these curves relate to the functioningof various oligomeric forms of an enzyme. The radii of the micelleinner cavity under conditions when these maxima are observedcorrelate with the linear dimensions of the enzyme oligomericforms. Correlation of the position of a maximum with the shapeof an oligomeric complex is discussed.     

Requirements for alumina refractories for growing leucosapphire crystals

Conclusions The conditions for melting alumina and the requirements for a raw material for the melting of single crystals of leucosapphire have been discussed. It is shown that impurities of Mn, Ti, and alkali metals lead to cracking and defects in the crystals; Mo, Cu, and V impurities accumulate in the crystals; and impurity Si, Cr, Mg, and Ga are removed. However, SiO₂ accumulates in the single crystals and scatters light.The effect of the composition of the alumina, the method of its preparation, and the firing conditions on the chemical composition and density of alumina articles have been studied.It is shown that the most promising material for growing leucosapphire single crystals with high transparency and without the boiling effect is an alumina ceramic based on alumina with an open porosity of 23–27% for the outlet of air and other gases and in which the alkali has been reduced to a very low level.Translated from Ogneupory, No. 7, pp. 9–15, July, 1984.     

Impedance spectroscopy study of hardened Portland cement paste

In this paper, the differential impedance analysis (DIA) has been applied to the study of the dielectric properties of hardened Portland cement paste. Two time constants are found in the impedance spectra obtained in the frequency region form 100 kHz to 15 MHz. One time constant has been attributed to the solid matrix and the other one to the liquid phase filling the pores. The effect of the cement paste-electrodes interface has been quantified using two different experimental set-ups. Measurements using direct contact between electrodes and cement paste have been compared with measurements using an air gap technique in which the specimen “floats” between the electrodes. The two referred time constants have been found in both types of measurements. The influence of drying on the dielectric parameters is also studied.     

Friction factors in pulsed turbulent flow

An apparatus for investigating pulsed turbulent liquid flow in a 2 in. diameter, 80 ft. pipeline is described. The pulsation unit was powered by compressed air with a consumption of up to 2.7 std. cu.ft./min. at 35 lb/in² gauge. The pressure drop for water flowing at mean velocities of 7.66 to 12.28 ft./sec. has been measured, both for steady flow and for pulsed flow, at frequencies between 0.48 and 0.82 Hz. The experimentally measured pressure versus time curves for pulsed flow can be matched fairly closely by a solution of Euler's equation employing the friction factors measured under steady flow conditions.