Investigations on junction temperature estimation based on junction voltage measurements

Reliability and ageing tests on power semiconductor devices require estimation of junction temperatures in order to control thermal stresses and monitor failure criteria. For this purpose, thermo-electrical parameters, such as voltage forward drop dependence with temperature are usually carried out in low injection level. Nevertheless, it is still difficult to evaluate the limits of such exploitation. An analytical model has been developed and validated by experimental measurements in order to evaluate self-heating effects and to understand high temperature effects. This model should also allow to highlight the role of some physical parameters in the voltage–temperature dependence and to clarify such thermal calibration.     

Secure and efficient anonymous authentication scheme for three-tier mobile healthcare systems with wearable sensors

The mobility and openness of wireless communication technologies make Mobile Healthcare Systems (mHealth) potentially exposed to a number of potential attacks, which significantly undermines their utility and impedes their widespread deployment. Attackers and criminals, even without knowing the context of the transmitted data, with simple eavesdropping on the wireless links, may benefit a lot from linking activities to the identities of patient’s sensors and medical staff members. These vulnerabilities apply to all tiers of the mHealth system. A new anonymous mutual authentication scheme for three-tier mobile healthcare systems with wearable sensors is proposed in this paper. Our scheme consists of three protocols: Protocol-1 allows the anonymous authentication nodes (mobile users and controller nodes) and the HSP medical server in the third tier, while Protocol-2 realizes the anonymous authentication between mobile users and controller nodes in the second tier, and Protocol-3 achieves the anonymous authentication between controller nodes and the wearable body sensors in the first tier. In the design of our protocols, the variation in the resource constraints of the different nodes in the mHealth system are taken into consideration so that our protocols make a better trade-off among security, efficiency and practicality. The security of our protocols are analyzed through rigorous formal proofs using BAN logic tool and informal discussions of security features, possible attacks and countermeasures. Besides, the efficiency of our protocols are concretely evaluated and compared with related schemes. The comparisons show that our scheme outperforms the previous schemes and provides more complete and integrated anonymous authentication services. Finally, the security of our protocols are evaluated by using the Automated Validation of Internet Security Protocols and Applications and the SPAN animator software. The simulation results show that our scheme is secure and satisfy all the specified privacy and authentication goals.     

Synthesis and Microwave Dielectric Properties of SrLa4−x Pr x Ti5O17 (0 ≤ x ≤ 4) Ceramics

Single-phase ceramics in the SrLa_4?x Pr _x La₄Ti₅O₁₇ (0 ≤ x ≤ 4) series were processed via a solid-state sintering route. X-ray diffraction analysis revealed single-phase ceramics for all the compositions. The molar volume (V _m) decreased while the theoretical density (ρ _th) increased with increase in the Pr content. Substitution of Pr³⁺ decreased the relative permittivity (ε _r) and temperature coefficient of resonant frequency (τ _f) due to its smaller ionic polarizability (α _d) and ionic radius than La³⁺. In the present study, ε _r ≈ 54.2, Q _u f ₀  ≈ 7935 GHz, and τ _f  ≈ ?20.3 ppm/°C were achieved for the composition with x = 2 (i.e., SrLa₂Pr₂Ti₅O₁₇).     

Enhancing inter-PMIPv6-domain for superior handover performance across IP-based wireless domain networks

As a network-based localized mobility management protocol, Proxy Mobile IPv6 (PMIPv6) enables a Mobile Host (MH) to roam within a localized domain without MH intervention in the mobility-related signalling. However, the PMIPv6 maintains MH mobility support in a restriction domain. Therefore, whenever the MH roams away from the PMIPv6 domain, its reachability status will be broken-down causing high handover latency and inevitable traffic loss for its communication session. This article proposes a proactive mechanism to mange the MH handover and maintain its data session continually across inter-PMIPv6-domains. The proposed mechanism introduces an intermediate global mobility anchor entity, called, which is responsible to coordinate MH handover as well as redirect its traffic across inter-PMIPv6-domains. Through various simulation evaluations, via ns-2, several experiments were conducted, revealing numerous results that verify the proposed mechanism superior performance over the conventional inter-PMIPv6-domain handover schemes in terms of handover latency, achieved throughput, protocol signalling cost and end-to-end traffic delivery latency.     

Tunable ferroelectric impedance matching networks and their impact on digital modulation system performance

In this paper the bit error rate performance and error vector magnitude of a tunable impedance matching network is analyzed assuming QPSK, 16-QAM and 64-QAM digital modulation schemes. The characterized tunable impedance matching network is based on barium–strontium–titanate ferroelectric thick-film varactors. Inherent dispersive behavior is subsumed into the forward transmission of the passive device. Due to this nonlinear phase response, in general to maximize the overall system performance, an agile tuning of the varactor values is demonstrated, taking into account the phase and group delay of s₂₁ parameter. Detailed signal simulation results based on measured data of a testbed are presented. The influence of varying matched impedances on the tuning behavior with different modulation bandwidths is discussed at a center frequency of 1.9 GHz.     

Modeling of Field Effect Transistor Channel as a Nonlinear Transmission Line for Terahertz Detection

This paper revisits the theory of operation of field effect transistor in the extremely high frequency scale, where the analysis has gone beyond the conventional cutoff frequency of the transistor. In this range, which is typically the terahertz (THz) and sub-terahertz range, the transistor blocks the high frequency signal and generates a rectified signal related to the input high frequency signal. An analytical model is derived for the channel of the FET in the linear mode of operation in non-resonant THz detection conditions. A transmission line distributed circuit model is applied. This is, from the authors’ point of view, the suitable model for high frequency non-quasi static operation and the characteristic parameters of this model are derived from the differential equation governing the electron gas in the channel. A comparison is presented for the calculated photoresponse with previously published experimental one showing good agreement away from the threshold potential. Finally, the effects of coupling between the present model and the external input circuit have been taken into account including the loading effects of the antenna and a discussion is given for the effect on frequency selectivity of the FET.     

Sleep scheduling with expected common coverage in wireless sensor networks

Sleep scheduling, which is putting some sensor nodes into sleep mode without harming network functionality, is a common method to reduce energy consumption in dense wireless sensor networks. This paper proposes a distributed and energy efficient sleep scheduling and routing scheme that can be used to extend the lifetime of a sensor network while maintaining a user defined coverage and connectivity. The scheme can activate and deactivate the three basic units of a sensor node (sensing, processing, and communication units) independently. The paper also provides a probabilistic method to estimate how much the sensing area of a node is covered by other active nodes in its neighborhood. The method is utilized by the proposed scheduling and routing scheme to reduce the control message overhead while deciding the next modes (full-active, semi-active, inactive/sleeping) of sensor nodes. We evaluated our estimation method and scheduling scheme via simulation experiments and compared our scheme also with another scheme. The results validate our probabilistic method for coverage estimation and show that our sleep scheduling and routing scheme can significantly increase the network lifetime while keeping the message complexity low and preserving both connectivity and coverage.     

Effect of wafer thinning methods towards fracture strength and topography of silicon die

This paper characterizes die damage resulting from various wafer thinning processes. Die fracture strength is measured using ball breaker test with respect to die surface finish. Further study on surface roughness and topography of each surface finish is obtained by atomic force microscopy (AFM) and scanning electron microscopy (SEM) techniques. Stress relief process with 25 μm removal is able to strengthen 100 μm wafer by 20.4% using chemical wet etch and 75 μm wafer by 36.4% with plasma etch. Relatively, plasma etching shows higher fracture strength and flexibility compared to chemical wet etch. This is due to topography of the finished surface of plasma etch is smoother and rounded, leading to a reduced stress concentration, hence improved fracture strength.