Processing of an East Mediterranean phosphate ore sample by an integrated attrition scrubbing/classification scheme (part one)

ABSTRACT

In this study, an Egyptian siliceous/calcareous sedimentary phosphorite was subjected to beneficiation by unsophisticated economic means. The mineralogical and chemical examination showed that the ore sample is a typical example for the East Mediterranean phosphorites with 21.80% P₂O₅, 10.93% acid insoluble and 16.61% loss on ignition. The primary crushed sample was classified into three size fractions without any milling and they were separately subjected to an integrated attrition scrubbing study. Screening and classification on the 2.30 mm and 0.071 mm sieves were sequentially introduced with the attrition process. The effect of solid%, attrition speed and time were studied and optimized for each size fraction. Results showed that three products were produced and could be categorized according to their P₂O₅ content into the coarse tailing (+2.30 mm), the attrition concentrate (?2.30 + 0.071 mm) and the phosphate fines (?0.071 mm). The P₂O₅ contents of these products reached 12.24%, 28.72% and 18.77%, with P₂O₅ distribution reached 6.74%, 51.75% and 41.51%, respectively. A global P₂O₅ of 28.72% was obtained with a recovery of about 52%. A tentative flow-sheet for the whole process was postulated.     

Degradability Enhancement of Poly(Lactic Acid) by Stearate-Zn(3)Al LDH Nanolayers

Recent environmental problems and societal concerns associated with the disposal of petroleum based plastics throughout the world have triggered renewed efforts to develop new biodegradable products compatible with our environment. This article describes the preparation, characterization and biodegradation study of poly(lactic acid)/layered double hydroxide (PLA/LDH) nanocomposites from PLA and stearate-Zn₃Al LDH. A solution casting method was used to prepare PLA/stearate-Zn₃Al LDH nanocomposites. The anionic clay Zn₃Al LDH was firstly prepared by co-precipitation method from a nitrate salt solution at pH 7.0 and then modified by stearate anions through an ion exchange reaction. This modification increased the basal spacing of the synthetic clay from 8.83 Å to 40.10 Å. The morphology and properties of the prepared PLA/stearate-Zn₃Al LDH nanocomposites were studied by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), thermogravimetric analysis (TGA), tensile tests as well as biodegradation studies. From the XRD analysis and TEM observation, the stearate-Zn₃Al LDH lost its ordered stacking-structure and was greatly exfoliated in the PLA matrix. Tensile test results of PLA/stearate-Zn₃Al LDH nanocomposites showed that the presence of around 1.0–3.0 wt % of the stearate-Zn₃Al LDH in the PLA drastically improved its elongation at break. The biodegradation studies demonstrated a significant biodegradation rate improvement of PLA in the presence of stearate-Zn₃Al LDH nanolayers. This effect can be caused by the catalytic role of the stearate groups in the biodegradation mechanism leading to much faster disintegration of nanocomposites than pure PLA.     

DNA Barcodes of Asian Houbara Bustard (Chlamydotis undulata macqueenii)

Populations of Houbara Bustards have dramatically declined in recent years. Captive breeding and reintroduction programs have had limited success in reviving population numbers and thus new technological solutions involving molecular methods are essential for the long term survival of this species. In this study, we sequenced the 694 bp segment of COI gene of the four specimens of Asian Houbara Bustard (Chlamydotis undulata macqueenii). We also compared these sequences with earlier published barcodes of 11 individuals comprising different families of the orders Gruiformes, Ciconiiformes, Podicipediformes and Crocodylia (out group). The pair-wise sequence comparison showed a total of 254 variable sites across all the 15 sequences from different taxa. Three of the four specimens of Houbara Bustard had an identical sequence of COI gene and one individual showed a single nucleotide difference (G > A transition at position 83). Within the bustard family (Otididae), comparison among the three species (Asian Houbara Bustard, Great Bustard (Otis tarda) and the Little Bustard (Tetrax tetrax)), representing three different genera, showed 116 variable sites. For another family (Rallidae), the intra-family variable sites among the individuals of four different genera were found to be 146. The COI genetic distances among the 15 individuals varied from 0.000 to 0.431. Phylogenetic analysis using 619 bp nucleotide segment of COI clearly discriminated all the species representing different genera, families and orders. All the four specimens of Houbara Bustard formed a single clade and are clearly separated from other two individuals of the same family (Otis tarda and Tetrax tetrax). The nucleotide sequence of partial segment of COI gene effectively discriminated the closely related species. This is the first study reporting the barcodes of Houbara Bustard and would be helpful in future molecular studies, particularly for the conservation of this threatened bird in Saudi Arabia.     

Enhancement of mechanical and thermal properties of polycaprolactone/chitosan blend by calcium carbonate nanoparticles

This study investigates the effects of calcium carbonate (CaCO(3)) nanoparticles on the mechanical and thermal properties and surface morphology of polycaprolactone (PCL)/chitosan nanocomposites. The nanocomposites of PCL/chitosan/CaCO(3) were prepared using a melt blending technique. Transmission electron microscopy (TEM) results indicate the average size of nanoparticles to be approximately 62 nm. Tensile measurement results show an increase in the tensile modulus with CaCO(3) nanoparticle loading. Tensile strength and elongation at break show gradual improvement with the addition of up to 1 wt% of nano-sized CaCO(3). Decreasing performance of these properties is observed for loading of more than 1 wt% of nano-sized CaCO(3). The thermal stability was best enhanced at 1 wt% of CaCO(3) nanoparticle loading. The fractured surface morphology of the PCL/chitosan blend becomes more stretched and homogeneous in PCL/chitosan/CaCO(3) nanocomposite. TEM micrograph displays good dispersion of CaCO(3) at lower nanoparticle loading within the matrix.     

Crystallization-induced valence state change of Mn2+ → Mn4+ in LiNaGe4O9 glass-ceramics

Tetra-valent manganese (Mn⁴⁺) has been regarded as an efficient non-rare-earth red-light emitting ion, which has stimulated continued search of robust hosts and efficient synthetic methods to stabilize Mn⁴⁺ centers with strong photoluminescence. In this work, we demonstrate a facile synthetic method for Mn⁴⁺ doped glass-ceramic (GC) based on crystallization-induced oxidation state change in an oxide glass. The parent glass with a formula of LiNaGe₄O₉ is fabricated by melt-quenching and crystallization is induced by thermal treatment in air. Oxidation of Mn²⁺ in glass to Mn⁴⁺ in the GC is confirmed by both optical spectroscopy and electron paramagnetic resonance (EPR) measurements. After thermal treatment, the characteristic reddish photoluminescence (PL) of Mn²⁺ in the glass centered at 611 nm disappears and a strong photoluminescence peak at 660 nm attributed to Mn⁴⁺ is observed. The conversion to Mn⁴⁺ after crystallization in the examined system may have strong implications for synthesis of Mn⁴⁺ doped phosphors which always requires rigorous control of the redox equilibrium during synthesis.     

Hydrodynamics of gas fluidized beds with mixture of group D and B particles

The dynamics of a gas‐solid fluidized bed containing Geldart Group D particles mixed with a small proportion of Geldart Group B particles are investigated using pressure fluctuations data. Time series analysis, using a variety of nonlinear dynamics tools, shows that the slugging present with Group D particles can be suppressed by the addition of a small proportion of Group B particles. The power spectra and the auto‐correlation function are used for a preliminary evaluation of dominant slug frequencies. It is shown that the bed fluidized with the mixture of Group D and B particles behaves in a less periodic manner and is dominated by more random bubble motion. On the other hand, the correlation integral is used to analyze the chaotic behaviour of the flow, through evaluation of the fractal structure of the reconstructed attractors. It is shown that the bed fluidized with Group D particles is characterized by a combination of steady slug motion and irregular particles motion. The behaviour of the fluidized bed of Group D/B particles mixture is characterized by a single correlation dimension for a wide range of fluidization velocities.     

Synthetic absorbent for dyestuffs based on gamma crosslinked poly(vinyl alcohol) (PVA)

This work reports on the characterization and uses of gamma radiation‐crosslinked poly(vinyl alcohol) (PVA) films as absorbents for different classes of dyestuffs normally released from textile factors. Dyestuffs were selected from different producers. These dyestuffs were Remacryl Blue (basic dye), Remazol Golden Orange (reactive dye), Solar Orange (direct dye), and Sandolan (acid dye). The percentage dye sorption by PVA was determined by spectroscopic analysis and color‐strength measurements of the PVA films after absorbing the different dyestuffs. The results showed that the concentration of dimethylbisacrylamide as a crosslinking agent has a great effect on the gel fraction and percentage swelling in water of the PVA polymer. In general, crosslinked PVA showed a low tendency to absorb the different dyestuffs under investigation at room temperature. This tendency was shown to increase with an increasing temperature of the dye solution from room temperature to 70°C. Meanwhile, the highest percentage of dye sorption was found in the case of the basic dye and the lowest one in the case of the reactive dye depending on the active groups on the dyes. Moreover, the percentage dye sorption by PVA was slightly higher in the acid medium rather than in the alkaline one. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 349–354, 2003     

Two‐Parameter Continuation and Bifurcation Strategies for Oscillatory Behavior Elimination from a Zymomonas mobilis Fermentation System

Two‐parameter continuation and bifurcation analysis strategies were applied to deal with the oscillatory phenomena of a Zymomonas mobilis ethanol fermentation system. A structured verified non‐linear mathematical model considering the physiological limitations of microorganisms for a single continuous fermenter for ethanol production using Z. mobilis was built to identify the Hopf bifurcation (HB) points, which indicate the oscillatory behavior, using the inlet substrate concentration and the dilution rate as bifurcation parameters. The path of the HB points can be determined with different controlling operating parameters. It was found that with the addition of a small amount of cells or ethanol to the feed stream or by increasing the dilution rate, the oscillations could be eliminated and steady‐state behavior was attained. Using a two‐parameter continuation strategy, the Z. mobilis fermentation system could operate at steady state without oscillatory behavior.     

Electrokinetic and antibacterial properties of needle like‐TiO2/polyrhodanine core/shell hybrid nanostructures

The aim of this study was to fabricate needle like‐TiO₂/polyrhodanine nanostructures by polymerizing rhodanine monomer on the TiO₂ nanoparticles' surfaces and investigate their antibacterial activities. The structural, thermal, morphological, surface and electrical properties of non‐covalently functionalized nanoparticles were characterized by using FTIR, XPS, elemental analysis, TGA, XRD, SEM‐EDX, TEM, contact angle, and conductivity measurements. Characterization results confirmed the formation of needle like‐TiO₂/polyrhodanine (PRh) core/shell hybrid nanostructures. Alterations on the surface and electrokinetic properties of the materials were characterized by zeta (ζ)‐potential measurements with the presence of various salts and surfactants. The ζ‐potential of needle like‐TiO₂ was observed to increase from ?7.6 mV to +28.4 mV after forming a core/shell needle like‐TiO₂/PRh nanocomposite structure and with the presence of cetyltrimethyl ammonium bromide (CTAB) surfactant. Thereby colloidally more stable dispersions were formed. Antibacterial properties of needle like‐TiO₂/PRh were also tested against Staphylococcus aureus, Klebsiella pneumoniae, and Escherichia coli by various methods and they showed good antibacterial activity. The highest killing efficiency was determined for needle like‐TiO₂/PRh against E. coli by colony‐counting method as 0.95. TEM experiments also showed the immobilizations of the nanoparticles on E. coli and revealed the interactions between E. coli and the nanoparticles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41554.