Reinforcement of graphene nanoplatelets on plasticized poly(lactic acid) nanocomposites: Mechanical,thermal, morphology,and antibacterial properties

Plasticized poly(lactic acid) (PLA)‐based nanocomposites filled with graphene nanoplatelets (xGnP) and containing poly(ethylene glycol) (PEG) and epoxidized palm oil (EPO) with ratio 2 : 1 (2P : 1E) as hybrid plasticizer were prepared by melt blending method. The key objective is to take advantage of plasticization to increase the material ductility while preserving valuable stiffness, strength, and toughness via addition of xGnP. The tensile modulus of PLA/2P : 1E/0.1 wt % xGnP was substantially improved (30%) with strength and elasticity maintained, as compared to plasticized PLA. TGA analysis revealed that the xGnP was capable of acting as barrier to reduce thermal diffusion across the plasticized PLA matrix, and thus enhanced thermal stability of the plasticized PLA. Incorporation of xGnP also enhanced antimicrobial activity of nanocomposites toward Escherichia coli, Salmonella typhimurium, Staphylococcus aureus, and Listeria monocytogenes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41652.     

Two‐Parameter Continuation and Bifurcation Strategies for Oscillatory Behavior Elimination from a Zymomonas mobilis Fermentation System

Two‐parameter continuation and bifurcation analysis strategies were applied to deal with the oscillatory phenomena of a Zymomonas mobilis ethanol fermentation system. A structured verified non‐linear mathematical model considering the physiological limitations of microorganisms for a single continuous fermenter for ethanol production using Z. mobilis was built to identify the Hopf bifurcation (HB) points, which indicate the oscillatory behavior, using the inlet substrate concentration and the dilution rate as bifurcation parameters. The path of the HB points can be determined with different controlling operating parameters. It was found that with the addition of a small amount of cells or ethanol to the feed stream or by increasing the dilution rate, the oscillations could be eliminated and steady‐state behavior was attained. Using a two‐parameter continuation strategy, the Z. mobilis fermentation system could operate at steady state without oscillatory behavior.     

Comparative study on the effect of various pretreatment methods on the enrichment of hydrogen producing bacteria in anaerobic granulated sludge from brewery wastewater

Five pretreatment methods, namely chemical, acid, heat-shock, freezing and thawing, and base, were evaluated for the enrichment of hydrogen-producing bacteria in anaerobic granulated sludge, which will be subsequently used as seed in biological hydrogen production. All the pretreatments showed positive effects towards improving hydrogen (H₂) generation by the microbial population with higher hydrogen production yield and COD removal efficiency as compared to control. The granulated sludge pretreated by heat-shock showed maximum accumulated H₂ (19.48mLg^?1-COD), COD removal efficiency (62%), and biomass concentration (22.5 gL^?1).     

DNA Barcodes of Asian Houbara Bustard (Chlamydotis undulata macqueenii)

Populations of Houbara Bustards have dramatically declined in recent years. Captive breeding and reintroduction programs have had limited success in reviving population numbers and thus new technological solutions involving molecular methods are essential for the long term survival of this species. In this study, we sequenced the 694 bp segment of COI gene of the four specimens of Asian Houbara Bustard (Chlamydotis undulata macqueenii). We also compared these sequences with earlier published barcodes of 11 individuals comprising different families of the orders Gruiformes, Ciconiiformes, Podicipediformes and Crocodylia (out group). The pair-wise sequence comparison showed a total of 254 variable sites across all the 15 sequences from different taxa. Three of the four specimens of Houbara Bustard had an identical sequence of COI gene and one individual showed a single nucleotide difference (G > A transition at position 83). Within the bustard family (Otididae), comparison among the three species (Asian Houbara Bustard, Great Bustard (Otis tarda) and the Little Bustard (Tetrax tetrax)), representing three different genera, showed 116 variable sites. For another family (Rallidae), the intra-family variable sites among the individuals of four different genera were found to be 146. The COI genetic distances among the 15 individuals varied from 0.000 to 0.431. Phylogenetic analysis using 619 bp nucleotide segment of COI clearly discriminated all the species representing different genera, families and orders. All the four specimens of Houbara Bustard formed a single clade and are clearly separated from other two individuals of the same family (Otis tarda and Tetrax tetrax). The nucleotide sequence of partial segment of COI gene effectively discriminated the closely related species. This is the first study reporting the barcodes of Houbara Bustard and would be helpful in future molecular studies, particularly for the conservation of this threatened bird in Saudi Arabia.     

Oligomeric Composition of Polyols From Fatty Acid Methyl Ester: The Effect of Ring‐Opening Reactants of Epoxide Groups

Commercial availability of fatty acid methyl ester (FAME) from palm oil targeted for biodiesel offers a good feedstock for the production of structurally well‐defined polyols for polyurethane applications. The effect of molecular weight (MW), odd and even carbon numbers, and the linear and branched structure reactants used in the ring‐opening reaction of epoxidized fatty acid methyl ester (E‐FAME) on the properties of polyols was investigated. Conversions of E‐FAME to PolyFAME polyols were confirmed by Fourier transform infrared analysis, oxirane oxygen content, and hydroxyl number. Gel permeation chromatography (GPC) calibrated against polyether polyols as a standard and vapor pressure osmometry were used for MW determination. GPC chromatograms of PolyFAME polyols clearly demonstrated the formation of oligomers during ring‐opening reactions. MW, and odd and even carbon numbers in a structure of linear diols and branched diol used in the syntheses of PolyFAME polyols did not have an effect on crystallinity, glass transition, or melt temperatures measured using Differential scanning calorimetry (DSC). PolyFAME polyols ring‐opened with water, methanol, and 1,2‐propanediol contained secondary hydroxyl groups, whereas PolyFAME polyols ring‐opened with linear diols contained a mixture of primary and secondary hydroxyl groups. It was found that the concentration of primary hydroxyl groups increased significantly by increasing the number of carbons from C2 to C3 in the linear diols. The viscosity of PolyFAME polyols also increased with the MW of linear diols used in the E‐FAME ring‐opening reaction. These findings would be beneficial for formulators in choosing the most cost effective polyols for polyurethane formulations.     

Enhancement of mechanical and thermal properties of polycaprolactone/chitosan blend by calcium carbonate nanoparticles

This study investigates the effects of calcium carbonate (CaCO(3)) nanoparticles on the mechanical and thermal properties and surface morphology of polycaprolactone (PCL)/chitosan nanocomposites. The nanocomposites of PCL/chitosan/CaCO(3) were prepared using a melt blending technique. Transmission electron microscopy (TEM) results indicate the average size of nanoparticles to be approximately 62 nm. Tensile measurement results show an increase in the tensile modulus with CaCO(3) nanoparticle loading. Tensile strength and elongation at break show gradual improvement with the addition of up to 1 wt% of nano-sized CaCO(3). Decreasing performance of these properties is observed for loading of more than 1 wt% of nano-sized CaCO(3). The thermal stability was best enhanced at 1 wt% of CaCO(3) nanoparticle loading. The fractured surface morphology of the PCL/chitosan blend becomes more stretched and homogeneous in PCL/chitosan/CaCO(3) nanocomposite. TEM micrograph displays good dispersion of CaCO(3) at lower nanoparticle loading within the matrix.     

Degradability Enhancement of Poly(Lactic Acid) by Stearate-Zn(3)Al LDH Nanolayers

Recent environmental problems and societal concerns associated with the disposal of petroleum based plastics throughout the world have triggered renewed efforts to develop new biodegradable products compatible with our environment. This article describes the preparation, characterization and biodegradation study of poly(lactic acid)/layered double hydroxide (PLA/LDH) nanocomposites from PLA and stearate-Zn₃Al LDH. A solution casting method was used to prepare PLA/stearate-Zn₃Al LDH nanocomposites. The anionic clay Zn₃Al LDH was firstly prepared by co-precipitation method from a nitrate salt solution at pH 7.0 and then modified by stearate anions through an ion exchange reaction. This modification increased the basal spacing of the synthetic clay from 8.83 Å to 40.10 Å. The morphology and properties of the prepared PLA/stearate-Zn₃Al LDH nanocomposites were studied by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), thermogravimetric analysis (TGA), tensile tests as well as biodegradation studies. From the XRD analysis and TEM observation, the stearate-Zn₃Al LDH lost its ordered stacking-structure and was greatly exfoliated in the PLA matrix. Tensile test results of PLA/stearate-Zn₃Al LDH nanocomposites showed that the presence of around 1.0–3.0 wt % of the stearate-Zn₃Al LDH in the PLA drastically improved its elongation at break. The biodegradation studies demonstrated a significant biodegradation rate improvement of PLA in the presence of stearate-Zn₃Al LDH nanolayers. This effect can be caused by the catalytic role of the stearate groups in the biodegradation mechanism leading to much faster disintegration of nanocomposites than pure PLA.