Investigation of controllable self-organized honeycomb micro-structure

Patterned micro- and nanostructure are of great significance in industrial applications such as electronics, optics and sensors. Microporous honeycomb film of polyhpenylene oxide (PPO) was fabricated as the template via evaporation of solution in carbon bisulfide under humid ambience. The effect of fabrication conditions on patterned microstructure was investigated by self-organization experiments to build quantitative relationship between ambient conditions such as humidity, concentration and honeycomb microstructure (diameter and height), through which the honeycomb film formation can be controlled to self-organize desirable PPO patterned microstructure. Especially, the height of honeycomb was derived from the diameter of honeycomb, and its validity was clarified by morphological comparison between PPO template and PDMS molded structure. Moreover, soft mold experiments were conducted to demonstrate its high efficiency and excellence as an alternative to construct regular micro-pattern.     

Electrosynthesis and charge-transport properties of poly(3′,4′-ethylenedioxy-2,2′:5′,2′′-terthiophene)

Polythiophene containing 3,4-ethylenedioxythiophene (EDOT), poly(3′,4′-ethylenedioxy-2,2′:5′,2′′-terthiophene), was synthesized by electrochemical oxidation of the corresponding monomer, 3′,4′-ethylenedioxy-2,2′:5′,2′′-terthiophene, in acetonitrile. The resulting polymer was soluble in DMSO and THF, and was characterized by ¹H NMR and mass spectroscopies, and GPC. The electrical conductivity of the oxidized polymer film was found to be comparable to those for polythiophene and poly(methylthiophene) despite of its short π-conjugation length.     

Melatonin-Induced Postconditioning Suppresses NMDA Receptor through Opening of the Mitochondrial Permeability Transition Pore via Melatonin Receptor in Mouse Neurons

Mitochondrial membrane potential regulation through the mitochondrial permeability transition pore (mPTP) is reportedly involved in the ischemic postconditioning (PostC) phenomenon. Melatonin is an endogenous hormone that regulates circadian rhythms. Its neuroprotective effects via mitochondrial melatonin receptors (MTs) have recently attracted attention. However, details of the neuroprotective mechanisms associated with PostC have not been clarified. Using hippocampal CA1 pyramidal cells from C57BL mice, we studied the involvement of MTs and the mPTP in melatonin-induced PostC mechanisms similar to those of ischemic PostC. We measured changes in spontaneous excitatory postsynaptic currents (sEPSCs), intracellular calcium concentration, mitochondrial membrane potential, and N-methyl-D-aspartate receptor (NMDAR) currents after ischemic challenge, using the whole-cell patch-clamp technique. Melatonin significantly suppressed increases in sEPSCs and intracellular calcium concentrations. The NMDAR currents were significantly suppressed by melatonin and the MT agonist, ramelteon. However, this suppressive effect was abolished by the mPTP inhibitor, cyclosporine A, and the MT antagonist, luzindole. Furthermore, both melatonin and ramelteon potentiated depolarization of mitochondrial membrane potentials, and luzindole suppressed depolarization of mitochondrial membrane potentials. This study suggests that melatonin-induced PostC via MTs suppressed the NMDAR that was induced by partial depolarization of mitochondrial membrane potential by opening the mPTP, reducing excessive release of glutamate and inducing neuroprotection against ischemia-reperfusion injury.     

Cloning an Autonomous Replication Sequence from Aspergillus oryzae

DNA sequence from Aspergillus oryzae genome which, confers on pOK-1 the ability to replicate autonomously in Saccharomyces cerevisiae is described. A hybrid plasmid pOK-1 was constructed from pBR325 and YEp13 fragment containing Leu2⁺ gene. Asp. oryzae DNA and pOK-1 were cleaved with BamHI, ligated and introduced into Escherichia coli. About 600 recombinant plasmids were obtained. One of them transforms S. cerevisiae SHY3 to Leu2⁺ with middle efficiency. The plasmid designated as pSB1–2 contained two BamHI fragments (4.3 kb and 4.1 kb) of Asp. oryzae DNA.     

Serum Amyloid A3 Promoter-Driven Luciferase Activity Enables Visualization of Diabetic Kidney Disease

The early detection of diabetic nephropathy (DN) in mice is necessary for the development of drugs and functional foods. The purpose of this study was to identify genes that are significantly upregulated in the early stage of DN progression and develop a novel model to non-invasively monitor disease progression within living animals using in vivo imaging technology. Streptozotocin (STZ) treatment has been widely used as a DN model; however, it also exhibits direct cytotoxicity to the kidneys. As it is important to distinguish between DN-related and STZ-induced nephropathy, in this study, we compared renal responses induced by the diabetic milieu with two types of STZ models: multiple low-dose STZ injections with a high-fat diet and two moderate-dose STZ injections to induce DN. We found 221 genes whose expression was significantly altered during DN development in both models and identified serum amyloid A3 (Saa3) as a candidate gene. Next, we applied the Saa3 promoter-driven luciferase reporter (Saa3-promoter luc mice) to these two STZ models and performed in vivo bioluminescent imaging to monitor the progression of renal pathology. In this study, to further exclude the possibility that the in vivo bioluminescence signal is related to renal cytotoxicity by STZ treatment, we injected insulin into Saa3-promoter luc mice and showed that insulin treatment could downregulate renal inflammatory responses with a decreased signal intensity of in vivo bioluminescence imaging. These results strongly suggest that Saa3 promoter activity is a potent non-invasive indicator that can be used to monitor DN progression and explore therapeutic agents and functional foods.     

Lubrication Mechanism of Phosphonium Phosphate Ionic Liquid Additive in Alkylborane–Imidazole Complexes

The assessment of ionic liquids (ILs) as lubricants in several tribological systems has shown their ability to provide remarkable reduced friction and protection against wear, whether they are used as additives or in the neat form. However, their corrosion and limited solubility in non-polar hydrocarbon oils represent the bottleneck-limiting factors for the use of ILs as lubricants. Therefore, in order to tackle these problems, mixtures of alkylborane–imidazole complexes with one halogen-free IL as additive were used in this study. The knowledge of the additive–surface interactions and hence the understanding of tribological properties are an important issue for lubricant formulations and were also investigated in this work. Thus, combination effects between two ionic liquid additives, a halogenated and a halogen-free one, were evaluated by a ball-on-disc-type tribometer under boundary lubrication conditions. Effective friction reduction and anti-wear properties have been demonstrated in tribological investigations when adding between 0.7 and 3.4 wt% of the halogen-free IL into base fluid composed of alkylborane–imidazole complexes. X-ray photoelectron spectroscopy analyses of the steel specimens were conducted to study the correlation between tribological properties and chemical surface composition of the boundary films formed on the rubbing surface. This work suggests potential applications for using halogen-free ILs as additives for synthetic ionic liquid lubricants.     

Deoxidation of Ti Melt by Newly Developed Two-Step Plasma Arc Melting Process Using Hydrogen

Metallurgical and Materials Transactions B - A two-step plasma arc melting process, comprising a first step under Ar-30 pct H2 gas flow and the second step under Ar gas flow, has been...     

Preparation of Yttria-Stabilized Zirconia Thin Films on Strontium-Doped LaMnO3 Cathode Substrates via Electrophoretic Deposition for Solid Oxide Fuel Cells

A yttria-stabilized zirconia (YSZ) thin film on an La_0.8Sr_0.2MnO₃ porous cathode substrate was prepared, using electrophoretic deposition (EPD) to fabricate a solid oxide fuel cell (SOFC). The electrical conductivity of an La_0.8Sr_0.2MnO₃ substrate is satisfactorily high at room temperature; therefore, YSZ powder could be deposited electrophoretically onto an La_0.8Sr_0.2MnO₃ substrate without any extra surface treatment, such as a metal coating. Successive repetition of EPD and sintering was required to obtain a film without gas leakage, because of the thermal expansion coefficient mismatch between the YSZ and the La_0.8Sr_0.2MnO₃ substrate. On the other hand, the electromotive force of the oxygen concentration in the cell that used YSZ film prepared via EPD increased and attained the theoretical value when the number of deposition and calcination cycles was increased. Six or more successive repetitions were required to obtain a YSZ film without gas leakage. A planar-type SOFC was fabricated, using nickel as the anode and YSZ film (∼10 μm thick) that had been deposited onto the La_0.8Sr_0.2MnO₃ substrate as the electrolyte and cathode. The cell exhibited an open circuit voltage of 1.0 V and a maximum power density of 1.5 W/cm². Thus, the EPD method could be used as a colloidal process to prepare YSZ thin-film electrolytes for SOFCs.