Development of a super high-rate Anammox reactor and in situ analysis of biofilm structure and function.

The anaerobic ammonium oxidation (Anammox) process is a new efficient and cost effective method of ammonium removal from wastewater. Under strictly anoxic condition, ammonium is directly oxidised with nitrite as electron acceptor to dinitrogen gas. However, it is extremely difficult to cultivate Anammox bacteria due to their low growth rate. This suggests that a rapid and efficient start-up of Anammox process is the key to practical applications. To screen appropriate seeding sludge with high Anammox potential, a real-time quantitative PCR assay with newly designed primers has been developed. Thereafter, the seeding sludge with high abundance of Anammox bacteria (1.7 x 10(8) copies/mg-dry weight) was selected and inoculated into an upflow anaerobic biofilters (UABs). The UABs were operated for more than 1 year and the highest nitrogen removal rate of 24.0 kg-N m-3 day(-1) was attained. In addition, the ecophysiology of Anammox bacteria (spatial distribution and in situ activity) in biofilms was analysed by combining a full-cycle 16S rRNA approach and microelectrodes. The microelectrode measurement clearly revealed that a successive vertical zonation of the partial nitrification (NH4+ to NO2-), Anammox reaction and denitrification was developed in the biofilm in the UAB. This result agreed with the spatial distribution of corresponding bacterial populations in the biofilm. We linked the micro-scale information (i.e. single cell and/or biofilm levels) with the macro-scale information (i.e. the reactor level) to understand the details of Anammox reaction occurring in the UABs.     

自组装Cu-Fe基复合材料的设计与开发

The Cu-Fe base alloys with liquid immiscible were prepared by gas atomization technique and conventional solidification process, the self-assemble composite microstructures in powders and bulk materials can be obtained under gravity conditions, respectively, and the minor liquid phase always forms the center of composite microstructure. It is shown that the formation of the core-type macroscopic morphology is strongly connected with the existence of a stable miscibility gap of the liquid phase in the Cu-Fe base alloys. This result can be explained by a mechanism that the minor droplets as the second phase are forced to move into the thermal center due to Marangoni motion, which is caused by the temperature dependence of interracial energy between two liquid phases.     

Pulsed field losses and coupling current loop in a large‐current superconductor

Pulsed field losses in a short sample (445 mm length) of 46‐kA Nb₃Sn cable‐in‐conduit conductor of superconducting magnet for the fusion experimental reactor “ITER” are measured by a calorimetric method. The coupling time constant between strands is obtained as 30 ms through pulsed loss. Based on this time constant and interstrand conductance measurement, it is expected that there is a coupling current loop length of about 400 mm, which is longer than half the fabrication twist pitch in the fourth cabling stage. A geometrical calculation on several‐stage cabling shows this value to be reasonable. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 142(4): 27–33, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10088     

Seasonal ultrastructural changes in apocrine gland cells in back skin of male brown bears (Ursus arctos)

Oily secretions from the back skin are involved in the marking behavior of male brown bears (Ursus arctos), and apocrine glands in back skin are activated during the breeding season. Here, we investigated seasonal changes in the intracellular organelles of apocrine gland cells in the back skin of male brown bears using transmission electron microscopy (TEM) and osmium‐maceration scanning electron microscopy (OM‐SEM). The morphological features of mitochondria and intracellular granules, and secretory mechanisms obviously differed between breeding and non‐breeding seasons. The TEM findings showed that contents of low‐density granules were released into the glandular lumen by frequent exocytosis, and sausage‐shaped mitochondria were located in the perinuclear region during the non‐breeding season. In contrast, high‐density granules appeared in the apical region and in projections during the breeding season, and swollen mitochondria and lysosome‐like organelles separating into high‐density granules were located in the perinuclear region. The OM‐SEM findings revealed swollen mitochondria with only a few partially developed cristae, and small mitochondria with cristae shaped like those in swollen mitochondria in the apical regions during the breeding season. These findings indicated that the small mitochondria corresponded to the high‐density granules identified by TEM. These findings suggested that mitochondria in apocrine gland cells swell, degenerate, fracture into small pieces, and are finally released by apocrine secretions during the breeding season. Small mitochondria released in this secretory manner might function as the source of chemical signals in the oily secretions of brown bears during the breeding season.     

Effect of carbon deposition by carbon monoxide disproportionation on electrochemical characteristics at low temperature operation for solid oxide fuel cells

The deterioration by carbon deposition was evaluated for electrolyte- and anode-supported solid oxide fuel cells (SOFCs) in comparison with carbon monoxide disproportionation and methane cracking. The polarization resistance of the nickel-yttria stabilized zirconia (Ni-YSZ) anode increased with a rise in CO concentration in H₂-CO-CO₂ mixture for the electrolyte-supported cells at 923 K. The resistance, however, did not change against CO concentration for the anode-supported cells. In a methane fuel with a steam/carbon (S/C) ratio of 0.1, the cell performance decreased for both of the cells at 1073 K. A large amount of agglomerated amorphous carbon was deposited from the anode surface to the interface between the anode and the electrolyte after power generation at S/C = 0.1 in methane fuel. On the other hand, the crystalline graphite was deposited only at the anode surface for the anode-supported cell after power generation in CO-CO₂ mixture. These results suggest that the reaction rate of CO disproportionation is faster than that of methane cracking. The deposited carbon near the anode/electrolyte interface caused the increase in the polarization resistance.     

Quasi-Drugs Developed in Japan for the Prevention or Treatment of Hyperpigmentary Disorders

Excess production of melanin or its abnormal distribution, or both, can cause irregular hyperpigmentation of the skin, leading to melasma and age spots. To date, various quasi-drugs that prevent or improve hyperpigmentary disorders have been developed and officially approved by the Ministry of Health, Labor and Welfare of Japan. Many of these inhibit the activity of tyrosinase, an enzyme required for melanin synthesis, for example, by competitive or non-competitive inhibition of its catalytic activity, by inhibiting its maturation, or by accelerating its degradation. In this review, we categorize the quasi-drugs developed in Japan to prevent or treat hyperpigmentary disorders, or both, and discuss perspectives for future development.     

POLYCYCLIC AROMATIC HYDROCARBON CONCENTRATIONS OF AIRBORNE PARTICLES IN URBAN AIR OVER THE PAST TWENTY YEARS

To estimate human exposure to hazardous chemicals, it is important to measure the annual trends regarding the concentrations of these compounds in the environment. Airborne particulate samples were collected over the past 20 years (1980–2001) from ambient air using a quartz fiber filter with the help of a high-volume air sampler placed on the top of the National Institute of the Public Health building, Minato-ku, Tokyo, Japan. In the present study, portions of these filter samples were analyzed to investigate the trends regarding the concentration of PAHs in urban air over the sampling period. The concentrations of various PAHs per unit air volume were determined. The concentrations of seven PAHs decreased within the sampling periods, especially in the late 1980s, and slowly decreased from the middle 1990s. The concentrations of seven PAHs were higher in autumn and winter than in the spring and summer.     

Chitin- polyurethane networks: correlations between physical properties and composition

Aiming to combine the bioproperties of chitin with the mechanical characteristics of polyurethane these two polymers were interconnected through a tridimensional network. The networks were formed from the addition reaction of the terminal isocyanate groups of a urethane prepolymer and the acetamide and hydroxyl groups of chitin. The crosslinking density was set from the ratio between the reacting groups, since the polyurethane length was kept constant (M_w = 66 kD, M_n = 48 kD). The biodegradability of polyurethane was afforded by the polycaprolactone segment of this component. The physical properties of the networks were analyzed in correlation with the composition, and compared with previous results obtained from blends with the same composition.     

2D-numerical analysis and optimum design of thin film silicon solar cells

Device modeling for p–i–n junction μc-Si basis thin film polycrystalline Si solar cells has been examined with a simple model of columnar grain structure and its boundary condition utilizing two-dimensional device simulator. As the simulation results of solar cell characteristics show, open-circuit voltage (V_oc) and curve fill factor (FF) considerably depend on those structural parameters, while short-circuit current density (J_sc) is comparatively stable by courtesy of homogeneous built-in electric field in the i layer. It has also been found that conversion efficiency over 12% could be expected with 1 μm grain size and well-passivated condition with 3 μm thick i-layer.     

Error-free 250 km transmission in standard fibre using compact 10 Gbit/s chirp-managed directly modulated lasers (CML) at 1550 nm

10 Gbit/s transmission over 250 km of standard fibre at 1550 nm with 4.8 dB penalty using a transmitter comprising a directly modulated DFB laser, a multi-cavity filter and a standard receiver, is demonstrated.