Microkinetic model for the pyrolysis of methyl esters: From model compound to industrial biodiesel

A tool for the generation of decomposition schemes of large molecules has been developed. These decomposition schemes contain radicals which can be eliminated from the model equations if both the μ‐hypothesis and the pseudosteady‐state approximation are valid. The reaction rate coefficients and thermodynamic parameters have been calculated by incorporating a comprehensive group additive framework. A microkinetic model for the pyrolysis of methyl esters with a carbon number of up to 19 has been generated using this tool. It is validated by comparing calculated and experimental yields of the pyrolysis of methyl decanoate and novel rapeseed methyl ester pyrolysis data in the temperature range from 800 to 1100 K and methyl ester partial pressure range from 1 × 10^?3 to 1 × 10^?2 MPa. This modeling frame work allows to not only assess the use of methyl ester mixtures as potential feedstock for olefin production but also their effect as blend‐in or trace impurity. © 2015 American Institute of Chemical Engineers AIChE J, 61: 4309–4322, 2015     

PS/PMMA-CdSe/ZnS Quantum Dots Hybrid Nanofibers for VOCs Sensors

Hybrid nanofibers containing CdSe/ZnS quantum dots have been produced by electrospinning of hybrid latexes to characterize the electro-optical behavior of this novel luminescent sensing material. The latexes are synthesized by seeded semi-batch emulsion polymerization yielding cross-linked core-shell PS/QDs/PMMA particles with efficiently encapsulated quantum dots guaranteeing a good optical stability. Addition of polyvinyl alcohol (PVA) or polyethylene oxide (PEO) to the latexes is necessary to produce polymeric dispersions suitable for electrospinning manufacture of the nanometric fibers. The optimized polymeric dispersions are successfully electrospun obtaining fluorescent nanofibers in both cases. The hybrid nanofibers are sensitive to selected solvents (acetone, methanol and THF) and present positive response making them good candidates for the production of VOC sensors.     

Correction to: Herd concentration areas create greenhouse gas hotspots

Nutrient Cycling in Agroecosystems -     

The effect of Li+ incorporation in Yb3+-Nd3+ co-doped CaF2 phosphors over the NIR photoluminescence emission excited under visible light

The structural and optical characteristics of Nd³⁺-Yb³⁺ doped CaF₂ phosphors with and without the addition of Li⁺ ions are described in this work. The phosphors synthetized by hydrothermal and co-precipitation methods showed near-infrared (NIR) luminescence emission associated with inter-electronic transition of the Yb³⁺ ion in the range of 900–1050 nm via energy transfer process from Nd³⁺ ions under visible light excitation. The addition of Li⁺ to these phosphors resulted in an improvement of the NIR luminescence intensity by a factor up to 5. The effect of the incorporation of Li⁺ ions into the CaF₂ crystallite structure, the reduction of luminescence quenching states, as well as the energy transfer mechanism involved are discussed.     

The Association of Il28b Genotype with the Histological Features of Chronic Hepatitis C Is HCV Genotype Dependent

The interleukin 28B (IL28B) rs12979860 polymorphism is associated with treatment outcome in hepatitis C virus (HCV) genotype 1 and 4 patients. Its association with the histological features of chronic hepatitis C and disease severity needs further clarifications. To assess the correlation between IL28B genotype, HCV genotype and liver biopsy findings in untreated patients.

Materials and Methods

Pre-treatment liver biopsies from 335 HCV Caucasian patients (59% males, age 50 years) enrolled in the MIST study were staged for fibrosis and inflammation according to the METAVIR and the Ishak scoring systems; steatosis was dichotomized as <5% or ≥5%. IL28B was typed by Taqman Single Nucleotide Polymorphism (SNP) genotyping assay. HCV genotype was 1 in 151 (45%), 2 in 99 (30%), 3 in 50 (15%) and 4 in 35 (10%) patients. IL28B genotype was CC in 117 (34%), CT in 166 (49%) and TT in 52 (15%). At univariate analysis, the IL28B CC genotype was associated with severe portal inflammation in HCV-1 patients (CC vs. CT/TT: 86% vs. 63%, p = 0.005), severe lobular inflammation in HCV-2 patients (CC vs. CT/TT: 44% vs. 23%, p = 0.03), and less fatty infiltration in HCV-1 patients (CC vs. CT/TT: 72% vs. 51%, p = 0.02). Despite the lack of any association between IL28B and fibrosis stage, in HCV-3 patients IL28B CC correlated with METAVIR F3–F4 (CC vs. CT/TT: 74% vs. 26%, p = 0.05). At multivariate analysis, the genotype CC remained associated with severe portal inflammation in HCV-1, only (Odds Ratio (OR): 95% Confidence Interval (CI): 3.24 (1.23–8.51)). IL28B genotype is associated with the histological features of chronic hepatitis C in a HCV genotype dependent manner, with CC genotype being independently associated with severe portal inflammation.     

Defined Conjugation of Glycans to the Lysines of CRM197 Guided by their Reactivity Mapping

Systematic characterisation of the reactivity of the lysine moieties in CRM₁₉₇ towards N‐hydroxysuccinimide linkers bearing alkynes or azides is described. This involves two‐step conjugation of various glycans to CRM₁₉₇ by click chemistry in a well‐defined manner. By semiquantitative LC‐MS/MS analysis of proteolytic digests of the conjugates formed, the reactivity of lysine residues in the protein was mapped and ranked. Computational analysis of the solvent accessibility of each lysine residue (based on the CRM₁₉₇ crystal structure) established a correlation between reactivity and surface exposure. By this approach, conjugation involving lysine residues (normally a random process) can be controlled. It enables the preparation of lysine‐mediated glycoconjugates with improved batch‐to‐batch reproducibility, thereby producing neo‐glycoconjugates with more‐consistent biological activity.     

One-pot synthesis and modification of silica nanoparticles with 3-chloropropyl-trimethoxysilane assisted by microwave irradiation

Industry and academia have shown great interest in the synthesis of organic–inorganic hybrid material because the modification of inorganic supports with organic groups increases the options for using these materials. Microwave irradiation as a heat source is an alternative tool compared with conventional heating (oil bath or furnace) to reduce the reaction times during the synthesis of these materials. Thus, the purpose of this work was to synthesize an organic–inorganic hybrid material, more specifically silica nanoparticles modified with 3-chloropropyl-trimethoxysilane, using microwave irradiation as the heat source. The hybrid materials were synthesized using the sol–gel method, with microwave irradiation for 10, 25, and 40?min, at 300?W of power and temperature of 40, 60, and 80°C. Elemental analyses, FTIR, and N₂ adsorption–desorption isotherms were developed to characterize the materials. It can be concluded that when microwave irradiation is used as a heat source, the reaction rate is accelerated and the surface area of hybrid materials increases considerably.     

Synthetic and Biological Studies of Sesquiterpene Polygodial: Activity of 9‐Epipolygodial against Drug‐Resistant Cancer Cells

Polygodial, a terpenoid dialdehyde isolated from Polygonum hydropiper L., is a known agonist of the transient receptor potential vanilloid 1 (TRPV1). In this investigation a series of polygodial analogues were prepared and investigated for TRPV1‐agonist and anticancer activities. These experiments led to the identification of 9‐epipolygodial, which has antiproliferative potency significantly exceeding that of polygodial. 9‐Epipolygodial was found to maintain potency against apoptosis‐resistant cancer cells as well as those displaying the multidrug‐resistant (MDR) phenotype. In addition, the chemical feasibility for the previously proposed mechanism of action of polygodial, involving the formation of a Paal–Knorr pyrrole with a lysine residue on the target protein, was demonstrated by the synthesis of a stable polygodial pyrrole derivative. These studies reveal rich chemical and biological properties associated with polygodial and its direct derivatives. These compounds should inspire further work in this area aimed at the development of new pharmacological agents, or the exploration of novel mechanisms of covalent modification of biological molecules with natural products.     

Fish Oil and Olive Oil Supplementation in Late Pregnancy and Lactation Differentially Affect Oxidative Stress and Inflammation in Sows and Piglets

This study was conducted to compare the effects of fish oil and olive oil supplementation in late pregnancy and during lactation on oxidative stress and inflammation in sows and their piglets. A total of 24 sows were fed a basal diet supplemented with additional corn starch (CON), fish oil (FO) or olive oil (OO). Sows fed an OO diet during late gestation had a higher piglet birth weight compared with CON‐fed and FO‐fed sows (P < 0.05). Furthermore, sows from the OO group had a higher milk fat content than sows from CON and FO groups, and a lower pre‐weaning mortality of piglets was observed in the OO group (P < 0.05). Maternal FO supplementation resulted in increased malondialdehyde concentration in sow plasma, colostrum, milk and piglet plasma than in CON and OO groups (P < 0.05). However, an increased total antioxidant capacity (T‐ACC) and activities of glutathione peroxidase (GSH‐Px) and total superoxide dismutase (T‐SOD) were also observed in the FO group (P < 0.05). Sows fed an OO diet had significantly decreased interleukin‐1β (IL‐1β), interleukin‐6 (IL‐6) and tumor necrosis factor‐α (TNF‐α) concentrations in milk compared with CON and FO fed sows (P < 0.05). Moreover, lower plasma IL‐1β and TNF‐α levels were observed in piglets from the OO group compared with the CON group (P < 0.05). Collectively, these results suggest that an OO diet is most beneficial in late gestation and during lactation in sows. However, FO increases the susceptibility to oxidative stress in sows and piglets.     

Zn in Athenian Black Gloss Ceramic Slips: A Trace Element Marker for Fabrication Technology

The black‐colored pottery slips produced in Athens from the 6th to 4th centuries B.C., had a consistent composition achieved through processing and refinement of raw clay. Little direct evidence has been established as to what were these refinement methods. To better understand how the slip material was prepared, the major and trace elemental compositions of 19 slips from different ceramic vessels and their corresponding bodies of Athenian red‐figure and black‐figure vases were determined using laser ablation inductively coupled plasma mass spectrometry (LA‐ICPMS). Notably higher Zn concentrations were found in the slips (271–1959 ppm) than in their corresponding body ceramics (<361 ppm). The Zn concentrations in the slips were also found to be above the natural background for typical clay (between 10 and 300 ppm) suggesting an unintentional anthropogenic enrichment of this metal. Based on the abnormally high Zn content of the slip, it is speculated that the clay was treated using vitriol (concentrated acid mine runoff which is rich in Zn), to induce flocculation and remove carbonate mineral phases from the raw material that, if present, would prevent the slip from vitrifying. This same signature of elevated levels of Zn with a corresponding Ce anomaly is also observed for black glosses produced in Corinthian and Etrurian (Italy) workshops indicating that these trace element signatures were imparted to the material by means of shared methods of manufacturing instead of being indicative of a single unique source for this material.