Diluent filler particle size effect for thermal stability of epoxy type resin

Epoxy resin is used as a material for electrical and electronics molding in various forms but its thermal conductivity must be controlled with various additives on account of its lower conductivity than metal or ceramics. Silicon dioxide (SiO₂) and silica were selected as the reinforcement and diluent filler for epoxy resins, respectively. The optimum amount of reinforcement filler, SiO₂, was 50 wt%. The thermal properties and thermal stability were observed according to silica ratio and particle size. An epoxy modified with a polyamide type hardener showed superior thermal conductivity to that modified with a cyclo-aliphatic amine type hardener. The thermal conductivity increased with increasing silica ratio and particle size. The thermal stability evaluation based on the particle size of silica was in the order of 14/18 mesh (1.00–1.16 mm) > 8/10 mesh (1.65–2.36 mm) > 28/35 mesh (0.42–0.59 mm). The optimum silica size of the diluent filler was 14/18 mesh (1.00–1.16 mm). An epoxy type resin transformer with excellent thermal properties and thermal stability could be designed when the mixing weight of epoxy resin was equal to that of the hardener.     

Synthesis and biological activity of medium range molecular weight polymers containing exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid (ETCA), was prepared by reaction of maleimidocaproic acid and furan. The homopolymer of ETCA and its copolymers with acrylic acid (AA) or with vinyl acetate (VAc) were obtained by photopolymerizations using 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C. The synthesized ETCA and its polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The apparent average molecular weights and polydispersity indices determined by gel permeation chromatography (GPC) were as follows: M_n = 9600 g mol^?1, M_w = 9800 g mol^?1, M_w/M_n = 1.1 for poly(ETCA); M_n = 14 300 g mol^?1, M_w = 16 200 g mol^?1, M_w/M_n = 1.2 for poly(ETCA‐co‐AA); M_n = 17 900 g mol^?1, M_w = 18 300 g mol^?1, M_w/M_n = 1.1 for poly(ETCA‐co‐VAc). The in vitro cytotoxicity of the synthesized compounds against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines decreased in the following order: 5‐fluorouracil (5‐FU) ≥ ETCA > polymers. The in vivo antitumour activity of the polymers against Balb/C mice bearing sarcoma 180 tumour cells was greater than that of 5‐FU at all doses tested. © 2001 Society of Chemical Industry     

Whole Exome Sequencing for a Patient with Rubinstein-Taybi Syndrome Reveals de Novo Variants besides an Overt CREBBP Mutation

Rubinstein-Taybi syndrome (RSTS) is a rare condition with a prevalence of 1 in 125,000–720,000 births and characterized by clinical features that include facial, dental, and limb dysmorphology and growth retardation. Most cases of RSTS occur sporadically and are caused by de novo mutations. Cytogenetic or molecular abnormalities are detected in only 55% of RSTS cases. Previous genetic studies have yielded inconsistent results due to the variety of methods used for genetic analysis. The purpose of this study was to use whole exome sequencing (WES) to evaluate the genetic causes of RSTS in a young girl presenting with an Autism phenotype. We used the Autism diagnostic observation schedule (ADOS) and Autism diagnostic interview revised (ADI-R) to confirm her diagnosis of Autism. In addition, various questionnaires were used to evaluate other psychiatric features. We used WES to analyze the DNA sequences of the patient and her parents and to search for de novo variants. The patient showed all the typical features of Autism, WES revealed a de novo frameshift mutation in CREBBP and de novo sequence variants in TNC and IGFALS genes. Mutations in the CREBBP gene have been extensively reported in RSTS patients, while potential missense mutations in TNC and IGFALS genes have not previously been associated with RSTS. The TNC and IGFALS genes are involved in central nervous system development and growth. It is possible for patients with RSTS to have additional de novo variants that could account for previously unexplained phenotypes.     

Effect of Heavy Metals in Plants of the Genus Brassica

Several species from the Brassica genus are very important agricultural crops in different parts of the world and are also known to be heavy metal accumulators. There have been a large number of studies regarding the tolerance, uptake and defense mechanism in several of these species, notably Brassica juncea and B. napus, against the stress induced by heavy metals. Numerous studies have also been published about the capacity of these species to be used for phytoremediation purposes but with mixed results. This review will focus on the latest developments in the study of the uptake capacity, oxidative damage and biochemical and physiological tolerance and defense mechanisms to heavy metal toxicity on six economically important species: B. juncea, B. napus, B. oleracea, B. carinata, B. rapa and B. nigra.     

Preparation of dual‐layer acetylated methyl cellulose hollow fiber membranes via co‐extrusion using thermally induced phase separation and non‐solvent induced phase separation methods

Dual‐layer acetylated methyl cellulose (AMC) hollow fiber membranes were prepared by coupling the thermally induced phase separation (TIPS) and non‐solvent induced phase separation (NIPS) methods through a co‐extrusion process. The TIPS layer was optimized by investigating the effects of coagulant composition on morphology and tensile strength. The solvent in the aqueous coagulation bath caused both delayed liquid–liquid demixing and decreased polymer concentration at the membrane surface, leading to porous structure. The addition of an additive (triethylene glycol, (TEG)) to the NIPS solution resolved the adhesion instability problem of the TIPS and NIPS layers, which occurred due to the different phase separation rates. The dual‐layer AMC membrane showed good mechanical strength and performance. Comparison of the fouling resistance of the AMC membranes with dual‐layer polyvinylidene fluoride (PVDF) hollow fiber membranes fabricated with the same method revealed less fouling of the AMC than the PVDF hollow fiber membrane. This study demonstrated that a dual‐layer AMC membrane with good mechanical strength, performance, and fouling resistance can be successfully fabricated by a one‐step process of TIPS and NIPS. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42715.     

Software for Simulation of Second‐Generation Ethanol Production by a Simultaneous Saccharification and Fermentation Process

Environmental impacts associated with the consumption of fossil fuels and the need to generate power through renewable resources demands the usage of alternative materials. The objective is the production of clean energy from materials like lignocellulosic biomass to produce second‐generation (2G) ethanol. A software in the Matlab program is elaborated to simulate the simultaneous saccharification and fermentation (SSF) process of lignocellulosic biomass for the 2G ethanol production in batch reactors. Studying the effects of the process variables, it was found that the higher interference is caused by cellulose concentration. Higher concentrations of the product in batch processes are obtained with the maximum cellulose concentrations, cells, and enzyme.     

Three-zone simulated moving-bed (SMB) for separation of cytosine and guanine

Separation of guanine and cytosine base pairs in nucleotide is an interesting topic for investigation of DNA structure. Therefore, an understanding of nucleotide separation by chromatography is necessary to prepare DNA molecules. Guanine and cytosine separation in SMB was simulated by Aspen chromatography and it was experimented by assembled 3-zone simulated moving bed (SMB) with change of stream flow rates, sample concentration, and desorbent flow rate. The simulation of batch chromatography was also confirmed by HPLC experiments. Based on these, good operating conditions of SMB chromatography were determined. Three-zone SMB equipment was set up by connecting three C₁₈-HPLC columns, four HPLC pumps, and six multiposition valves. Batch chromatography of cytosine and guanine was conducted to determine the isotherms of the two nucleotides. The outlet streams of SMB, raffinate and extract were sampled and analyzed by analytical HPLC system. The adsorption isotherms of cytosine and guanine were H_C= 0.5 and H _G =1.05. The highest experimental purity of cytosine and guanine in SMB was obtained as 94.9% and 89.8% with operating parameters of Q _feed =0.2 mL/min, Q _desorbent =0.6 mL/min, Q _extract =0.2 mL/min, Q _raffinate =0.6 mL/min, and switching time=7 min.     

Real‐time monitoring by proton relaxometry of radical polymerization reactions of acrylamide in aqueous solution

The potential of time‐domain nuclear magnetic resonance (TD‐NMR) for the real‐time monitoring of solution radical polymerizations is demonstrated. A model system composed of a redox‐pair initiator system, acrylamide as monomer and water as solvent was investigated. A second‐generation continuous wave free precession technique was employed to measure the longitudinal relaxation time constant (T₁) of the samples throughout the polymerization reactions. This parameter was shown to be sensitive to the reactant feed free‐radical enhancement of the water molecule relaxation time, making it a good probe to monitor monomer conversion in real time in an automated, non‐destructive fashion. It was found that the T₁ value was better than the transverse relaxation time constant (T₂) for describing the evolution of the polymerization reactions, due to its greater sensitivity to paramagnetic effects. The TD‐NMR signal variation observed was linked to the formation, propagation and termination steps of the radical polymerization kinetics scheme. These first results may contribute to the application of real‐time monitoring of radical polymerization reactions employing low‐cost and robust TD‐NMR spectrometers. © 2018 Society of Chemical Industry     

Physicochemical properties and bioactivity of brown seaweed fucoidan prepared by ultra high pressure-assisted enzyme treatment

The effects of ultra-high pressure (UHP, 100 MPa, 40, 24 h) processing and enzyme treatment on the physicochemical properties and anticoagulant activity of fucoidan obtained from Undaria pinnatifida sporophyll (UPS) were investigated. Crude UPS fucoidan (F _UPS ) with an average MW of 877 kDa was slightly depolymerized by UHPassisted Tunicase treatment, yielding fucoidan with a lower MW (600–800 kDa). UHP-enzyme treatment decreased the sulfate, fucose and galactose contents of F _UPS but increased its glucose content. From FT-IR spectrum, UHP-enzyme treatment was found not to cause a structural change on S=O and C-O-S. After UHP-enzyme treatment, the sulfate content and average MW of F _UPS decreased with the increase of Tunicase concentration. It was found that among the UHP-enzyme-treated fucoidans, F _UPS -T0.3-U (Tunicase 0.3% treatment+UHP treatment) possessed the highest anticoagulant activity. F _UPS -T0.3-U appeared to inhibit blood coagulation via intrinsic pathway. With the increase of sulfate content in F _UPS , activated partial thromboplastin time (APTT) and thrombin time (TT) showed a tendency of increase. APTT and TT had the highest values in F _UPS -T0.3-U in which the sulfate concentration was 24%, but on the contrary decreased at a sulfate concentration of above 24%. This result indicates that there is an optimum sulfate concentration for the anticoagulant activity of fucoidan. Consequently, UHP-assisted enzymatic treatment was found to be helpful for the improvement of anticoagulant activities of fucoidan.