One dimensional nanostructured materials

The quest for materials with molecular scale properties that can satisfy the demands of the 21st century has led to the development of one dimensional nanostructures, ODNS. Nearly, every class of traditional material has an ODNS counterpart. ODNS has a profound impact in nanoelectronics, nanodevices and systems, nanocomposite materials, alternative energy resources and national security. The interface of nanoscience and technology with biological and therapeutic sciences is expected to radically improve the ability to provide efficient treatments in otherwise impossible situations. Ironically, the huge investment in the past few years across the globe is yet to bring the real benefit of nanotechnology in day to day life. While scientists and engineers are working towards this goal, concerns about the possible harmful effects of the high aspect ratio materials are increasing every day. Following is an effort to assimilate most of the aforementioned aspects including the entire gamut of ODNS, i.e., elements, ceramics, polymers and composites, with a brief discussion on CNT and toxicology. The focus of this article is mainly on the science behind the synthesis and properties of the ODNS rather than the device fabrication. However, a few challenges in the field of device fabrication are mentioned in appropriate contexts. Possible mechanisms of the ODNS evolution from various methods, such as vapor liquid solid (VLS), template based and electrochemically induced growth, have been discussed in detail. Electron microscopy analysis has received special focus in determining the unique structural features. The article concludes by discussing current research related to environment and toxicology effects and current challenges in this rapidly evolving field.     

A powerful approach to develop nitrogen-doped graphene sheets: theoretical and experimental framework

Journal of Materials Science - We have reported a novel route to develop highly conductive graphene sheets using camphor as a natural precursor followed by nitrogen doping via low-temperature...     

Water repellent ZnO nanowire arrays synthesized by simple solvothermal technique

The authors report on the water repellent properties of quasialigned zinc oxide (ZnO) nanowire arrays grown by low-temperature solvothermal technique. The uniform and dense ZnO nanowires of average diameter ∼ 75 nm have been found to have hexagonal wurtzite type structure. The as synthesized ZnO nanowire surfaces have hydrophilic nature with a water contact angle of 73° ± 3°. The superhydrophobic behavior with a water contact angle of 145° ± 3° of the nanowire arrays has been realized due to the reduction of surface free energy after being coated with an octadecyltrichlorosilane (OTS) monolayer. This work may be of huge importance from the viewpoint of both the understanding of the mechanisms involved and industrial applications.     

Real time stochastic scheduling in broadcast systems with decentralized data storage

Data broadcasting is an efficient method to disseminate information to a large group of requesters with common interests. Performing such broadcasts typically involve the determination of a broadcast schedule intended to maximize the quality of service provided by the broadcast system. Earlier studies have proposed solutions to this problem in the form of heuristics and local search techniques designed to achieve minimal deadline misses or maximal utility. An often ignored factor in these studies is the possibility of the data items being not available locally, but rather have to be fetched from data servers distributed over a network, thereby inducing a certain level of stochasticity in the actual time required to serve a data item. This stochasticity is introduced on behalf of the data servers which themselves undergo a dynamic management of serving data requests. In this paper we revisit the problem of real time data broadcasting under such a scenario. We investigate the efficiency of heuristics that embed the stochastic nature of the problem in their design and compare their performance with those proposed for non-stochastic broadcast scheduling. Further, we extend our analysis to understand the various factors in the problem structure that influence these heuristics, and are often exploited by a better performing one.     

Electrical properties of niobium doped Bi4Ti3O12-SrBi4Ti4O15 intergrowth ferroelectrics

Nb-doped Bi₄Ti₃O₁₂-SrBi₄Ti₄O₁₅ intergrowth ceramics have been prepared by modified oxalate route. XRD phase analysis confirmed the formation of single phase compound. Nb-doping does not affect the basic crystal structure of the intergrowth. SEM micrographs showed that the grain size of the ceramics decreases with Nb-doping. The temperature dependence of dielectric constant and losses was investigated in the temperature range 30–800 °C and frequency range 1 kHz–1 MHz. With Nb-doping, the T_c of the ferroelectrics reduces and peak permittivity increases. Doping also introduces small relaxor behavior in the ferroelectrics. The dc conductivity of the ceramics decreases with doping. The remnant polarization (P_r) of the intergrowth ferroelectrics is increased with Nb doping.     

Control of thermo reversible gelation of methylcellulose using polyethylene glycol and sodium chloride for sustained delivery of ophthalmic drug

The effect of molecular weight of polyethyleneglycol (PEG) and sodium chloride (NaCl) on the gelation temperature of methylcellulose (MC) was studied with the objective to develop a MC based formulation for sustained delivery of ophthalmic drug. The gelation temperature of 1% MC was 60 ± 0.40°C. It was found that the gelation temperature of MC was reduced with the addition of 10% PEG and extent of reduction of gelation temperature was depended on the molecular weight of PEG at same PEG concentration of 10%. The gelation temperature of MC was reduced by 10.4 to 5.9°C with the increasing molecular weight of PEG starting from 400 to 20,000 (M_n ) depending on the method of determination of gelation temperature. To reduce the gelation temperature of MC close to physiological temperature (37°C), 6% NaCl was added in the different MC‐PEG combinations containing different molecular weight of PEG. It was observed that the drug release time increased from 5 to 8 h with the increase in molecular weight of PEG from 400 to 20,000 (M_n ) and this was due to the maximum viscosity and gel strength of MC‐PEG20000‐NaCl ternary combination. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Redox-catalytic correlations in oxidised copper-ceria CO-PROX catalysts

Four nanostructured oxidised copper-cerium catalysts prepared by two different methods (impregnation of ceria and coprecipitation of the two components within reverse microemulsions) with varying copper loadings have been examined with the aim of establishing correlations between redox and catalytic properties for preferential oxidation of CO in H₂-rich streams. The analysis is based on ex situ TPR examination both with H₂ or CO as well as operando spectroscopic exploration by DRIFTS and XANES, additionally complemented by conventional catalytic tests. The results reveal redox promoting effects on copper oxide reduction and allow establishing a model of the catalytic behaviour of this type of catalysts which can provide keys to control their CO-PROX catalytic properties.     

Unconfined compressive strength of fly ash reinforced with jute geotextiles

A series of unconfined compressive strength (UCS) tests have been conducted on unreinforced fly ash as well as fly ash reinforced with jute geotextiles. The effects of different governing parameters viz., degree of saturation, size of samples, number of jute geotextile layers and age of sample on UCS have been studied. From the test results it is found that the values of UCS are maximum at degree of saturation of 70–75%. The effect of sample size on the values of UCS for unreinforced fly ash is insignificant, whereas with increase in diameter of sample, values of UCS increase in case of reinforced fly ash. With increase in number of jute geotextile layers for reinforced fly ash samples, values of UCS increase and maximum enhancement is found to be around 525% with 4 layers of reinforcement. A non-linear power model has been developed to estimate unconfined compressive strength (UCS_R) of fly ash reinforced with jute geotextiles in terms of unconfined compressive strength (UCS_UR) of unreinforced fly ash and number of layers of reinforcement (N).