Chemically deposited nickel oxide as counter electrode for dye sensitized solar cell

Nickel oxide (NiO) thin films have been synthesized by simple and inexpensive chemical bath deposition at low temperature. The synthesized thin films were annealed at 623 K and used for further characterization. Structural and morphological properties of the NiO thin film were characterized using X-ray diffraction and scanning electron microscope (SEM), respectively. The structural study shows the simple cubic formation of NiO thin films with average crystallite size of 9 nm. Honeycomb like surface morphology with porous structure was observed from the SEM study. NiO thin film electrode has been used as a counter electrode in dye sensitized solar cell. Finally, photovoltaic parameters such as short circuit current density (J_sc), open circuit voltage (V_oc), Fill Factor (FF) and efficiency (η) have been studied.     

K–La–MgO as heterogeneous catalyst for synthesis of 3-(2-hydroxyethyl)-1,3-oxazolidin-2-one from diethanol amine and carbon dioxide

Cost-effective valorization of carbon dioxide into bulk and specialty chemicals using catalysis will be attractive in the foreseeable future. 1,3-Oxazolidin-2-one derivatives are one of the important classes of heterocyclic compounds which have wide applications in pharmaceutical industries due to their biological activities such as antibacterial, antimicrobial, antiseptic. Various synthetic routes are employed to prepare these compounds which include phosgenation, oxidative carbonylation, etc., which make use of polluting chemicals and homogeneous catalysts. The heterogeneous catalytic processes to synthesize these derivatives are quite limited. Thus, developing a green route which is environmental friendly is highly desirable. The current work deals with development of a heterogeneous reusable catalyst and its application to synthesize 1,3-oxazolidin-2-one derivatives using carbon dioxide as a C1 source. The fact that no use of promoter or organic co-catalyst is made in the current process makes the synthesis route more favorable. Pure La–MgO and K–La–MgO with different K loading (1, 3, 5, and 7 wt%) synthesized by combustion route were screened for carbonylation of diethanol amine. 5% K–La–MgO was found to be the best catalyst. The catalyst was well characterized in virgin form and after use by various analytical techniques like TEM, SEM, XRD, CO₂ and NH₃-TPD, BET surface area analysis. With 5% K–La/MgO, 72% conversion of diethanol amine was achieved with 100% selectivity of the desired product at optimum conditions, i.e., 150 °C, 5 wt% K–La/MgO catalyst loading of 0.02 g/cm³ and 2.0 MPa CO₂ pressure. Reaction mechanism was proposed and kinetic model developed. The apparent activation energy was calculated as 18.76 kcal/mol. The catalyst was robust and recyclable. The process is clean and green.     

Improving Water Supply Outlook in Korea with Ensemble Streamflow Prediction

Abstract

The purpose of this study is to propose an alternative forecasting approach for improving the current water supply outlook in Korea. Using a rainfall-runoff model, the existing technique for the water supply outlook in Korea produces monthly low, average, and high runoff forecasts. The proposed technique is called Ensemble Streamflow Prediction (ESP), and is currently implemented by the National Weather Service in the U.S.A. ESP appears particularly valid in Korea where the historical rainfall record is much more comprehensive than the historical streamflow record. This study applies ESP to runoff forecasting for a river basin in Korea to examine its applicability. An ensemble of one-month ahead runoff forecasts at the Gongju gauging station in the Keum River basin, Korea, was generated for each month. The resulting ESP forecasts were compared with the corresponding observed runoff data as well as the existing forecasts. Although this study is limited to one case study, the following conclusions can be made: (1) the ESP technique dominates the existing forecasting techniques in terms of both systematic and random errors; and (2) ESP is more accurate when high flows occur.     

A tetrode based fast pulsed microwave source for electron cyclotron resonance breakdown experiments

To study electron cylotron resonance (ECR) breakdown and afterglow plasma in an experimental linear plasma system, a pulsed microwave source with rapid rise and fall of microwave power is desired. A pulsed microwave source with fast rise and fall capability for ECR breakdown experiments has been designed and tested for performance in the system. A tetrode, controlled by a modulator card, is used as a fast switch to initiate microwave power from a conventional magnetron operating at 2.45 GHz. The typical rise time of microwave power is approximately 3 micros and a fall time of approximately 10 micros. Using this scheme in a realistic pulsed microwave source at 800 W power, ECR breakdown of neutral gas is achieved and the plasma delay and fall time are observed from the plasma density measurements using a Langmuir probe. The design details of the fast rise pulsed microwave source are presented in this article with initial experimental results.     

Development of Cu particles and Cu core-shell particles reinforced Al composite

Copper particles were incorporated and retained in elemental state in an aluminium matrix by friction stir processing thereby producing a non-equilibrium particulate composite. The processed Al–Cu_p composite exhibited improved strength with significantly high ductility. The composite was stable up to a temperature of more than 300°C. Thermal exposure at 350°C for more than 10 min led to diffusion of Cu atoms into the Al matrix forming a core-shell type structure in the Cu particles and thus producing an Al–Cu core-shell composite. The shell consists of multiple layers, the thickness of which was controllable.     

A methodology to model the information structure of an organization

The Integrated Computer Aided Manufacturing (ICAM) program of the U.S. Air Force identified a need to better communicate and analyze manufacturing for the people involved in improving productivity. To satisfy that need, the ICAM program developed the IDEF (ICAM Definition) method to address particular characteristics of manufacturing. This IDEF method is equally applicable in analyzing other types of organizations. IDEF comprises three modeling methodologies: function model methodology (IDEF₀), information model methodology (IDEF₁) and dynamics model methodology (IDEF₂). This paper reports on the Information model methodology only. This methodology is used to construct an information model that helps in understanding the structure of information needed to support the functions of an organization.     

Photoreceptor Cells Constitutively Express IL-35 and Promote Ocular Immune Privilege

Interleukin-27 is constitutively secreted by microglia in the retina or brain, and upregulation of IL-27 during neuroinflammation suppresses encephalomyelitis and autoimmune uveitis. However, while IL-35 is structurally and functionally similar to IL-27, the intrinsic roles of IL-35 in CNS tissues are unknown. Thus, we generated IL-35/YFP-knock-in reporter mice (p35-KI) and demonstrated that photoreceptor neurons constitutively secrete IL-35, which might protect the retina from persistent low-grade inflammation that can impair photoreceptor functions. Furthermore, the p35-KI mouse, which is hemizygous at the il12a locus, develops more severe uveitis because of reduced IL-35 expression. Interestingly, onset and exacerbation of uveitis in p35-KI mice caused by extravasation of proinflammatory Th1/Th17 lymphocytes into the retina were preceded by a dramatic decrease of IL-35, attributable to massive death of photoreceptor cells. Thus, while inflammation-induced death of photoreceptors and loss of protective effects of IL-35 exacerbated uveitis, our data also suggest that constitutive production of IL-35 in the retina might have housekeeping functions that promote sterilization immunity in the neuroretina and maintain ocular immune privilege.     

Thermal instability of rotating nanofluid layer

In the present paper we have considered thermal instability of rotating nanofluids heated from below. Linear stability analysis has been made to investigate analytically the effect of rotation. The more important effect of Brownian motion and thermophoresis has been included in the model of nanofluid. Galerkin method is used to obtain the analytical expression for both non-oscillatory and oscillatory cases, when boundaries surfaces are free–free. The influence of various nanofluids parameters and rotation on the onset of convection has been analysed. It has been shown that the rotation has a stabilizing effect depending upon the values of various nanofluid parameters. The critical Rayleigh number for the onset of instability is determined numerically and results are depicted graphically. The necessary and sufficient conditions for the existence of over stability are also obtained.