Evaluation of a cocktail of three bacteriophages for the biocontrol of Salmonella of wastewater

Salmonella serovars are increasing in importance as significant pathogens of both human and animals. Although water and wastewater are treated to eliminate pathogenic microorganisms, they still play an important role in the transmission of Salmonella spp. In this study, bacteriophages infecting Salmonella spp. were isolated from wastewater and evaluated; for their potential to lyse environmental Salmonella strains in vitro at different MOIs and temperatures; and to control the wastewater bacterial community. Three distinct phages designated sww65, sww275, and sww297; as defined by plaque morphology, electron microscopy and host range; were obtained from wastewater. Challenge tests were performed at 37, and 30 °C with the infection of the Salmonella cultures with individual phage, a mixture of two phages, and cocktail of three phages at MOIs of 10⁰, 10², and 10⁴ PFU/CFU. At 30, and 37 °C, a cocktail of three phages reduced all of the Salmonella cultures tested. These results required a high multiplicity of infection. However, when infected with only one phage or a mixture of two phages at MOIs of 10⁰ or 10 ² PFU/CFU, an emergence of bacterial resistance was observed. The dynamic monitoring of wastewater enterobacterial community was conducted using Enterobacterial Repetitive Intergenic Consensus-PCR (ERIC-PCR). The number of bands decreased gradually with the use of individual phage or phage cocktails. Moreover, the dynamic monitoring of Salmonella community during wastewater treatment was performed using PCR detection of virulence gene invA. The results correlated with the ERIC-PCR fingerprints, and suggested that Salmonella community was affected by the phage treatment. Indeed, in wastewater, bacteriophages are reducing Salmonella and other members of the Enterobacteriaceae. These results indicated that dynamic changes are closely related with the process of treatment. The introduction of wide host range bacteriophages in wastewater can have a potential impact on the dynamics of the microbial communities, manifested by the reduction or the elimination of microbial species.     

Cross-linked soy protein as material for biodegradable films: Synthesis, characterization and biodegradation

The modification of soy protein isolate (SPI) with different amounts of a naturally occurring cross-linking agent (genipin, Gen) and glycerol used as plasticizer was carried out in this work. The films yielded were cast from heated and alkaline aqueous solution of SPI, glycerol and Gen and then dried in an oven. Total soluble matter, water vapor permeability and mechanical properties were improved by adding small amounts of Gen. These properties were not significantly affected (P ? 0.05) by additions exceeding 2.5% (w/w of SPI). The opacity and cross-linking degree were linearly increased with the addition of Gen, whereas the swelling ratios in water were decreased. All the films were submitted to degradation under indoor soil burial conditions and the weight loss of the films was measured at different times. This study revealed that the film biodegradation time can be controlled or modified from at least 14 to 33 days. The tests performed showed the potential of Gen to improve the SPI film properties, in which the possibility of employing such new films as biodegradable food packaging was raised.     

Efficient polymer nanocrystal hybrid solar cells by improved nanocrystal composition

We demonstrate the importance of the nanocrystal surface treatment and the inorganic composition for hybrid solar cells. Mixtures of CdSe nanorods and CdSe quantum dots integrated in hybrid solar cells together with the conjugated polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) perform better than nanorod and quantum dot only based devices. In addition larger sized quantum dots show a similar improvement after integration in respective solar cells. Power conversion efficiency values exceeding 3% are observed. A first result on the shelf lifetime of such a device is highlighted.     

The polynomial discrete Radon transform

This paper presents a new approach called polynomial discrete Radon transform (PDRT), regarded as a generalization of the classical finite discrete Radon transform. Specifically, the PDRT transforms an image into Radon space by summing the pixels according to polynomial curves. The PDRT can be applied on square \(p \times p\) images where \(p\) is assumed to be a prime number. It is based on a simple arithmetic operations and requires no data interpolation. An interesting property of the PDRT is its exact inversion. This means that an image can be transformed and then perfectly reconstructed. Through this study, we show that the new approach can be applied for some pattern recognition applications.     

Functional and chemical characterization of the aging process of an igniter

The igniter consisting of 34% Mg, 60% KNO₃, 3% KClO₄ and 3% organic binder was subjected to accelerated aging under the conditions of 85% relative humidity at 65°C, 75°C and 85°C, and at 75°C with 92% relative humidity. Chemical aging was followed through formation of Mg(OH)₂ and KNO₂. Functional characterization was accomplished in a device constructed to enable simultaneous determination of the heat of combustion and pressure-time recording of the combustion process of both fresh and aged samples. The maximum acceptable deterioration occured at different times depending upon the conditions. The acceleration factor for every 10°C at 85% relative humidity is on average 2.8, leading to a prediction of shelf life of not more than 4 years at 25°C. At the time when burning characteristics were significantly changed, the mixture suffered only slight chemical changes, with only about 1% Mg(OH)₂ and 0.5% KNO₂ being formed. Thus, no chemical changes should be tolerated in such formulations.     

Optimized protocol for the biocompatibility testing of compression stockings and similar products with close skin contact in vitro

Biocompatibility of six different compression stockings and cytotoxic effects were determined using HaCaT keratinocytes, L929 mouse fibroblasts, primary adult and juvenile keratinocytes Cells were quantified using a luminometric ATP assay and the photometric BCA test. Cytotoxic effects were determined by LDH release. An area-based extraction ratio of 1.25 cm²:mL could be shown to be superior to the weight-based extraction of test material. Extraction medium should be an acidic sweat solution as this helps to recreate in vivo conditions. Monolayer cultures of HaCaT keratinocytes or L929 mouse fibroblasts should be used for testing. Primary adult keratinocytes or primary juvenile keratinocytes can also be used. For the latter, testing under DMEM with FCS is recommended to achieve comparable results. It was found that the compression stockings tested exhibited no negative influence on cell viability in vitro and no direct cytotoxic effects measured as release of LDH. Hence, good biocompatibility could be asserted.     

Difference equation matrix model (DEMM) for the control of wind turbines

In this paper, a new algorithm, difference equation matrix model (DEMM), in the framework of model predictive control (MPC) is introduced. Instead of the standard dynamic matrix control (DMC), which is based upon step response method that has been used in most research works, we propose a new approach based upon a DEMM for model prediction. It has shown that DEMM has proven to be less computational and thus faster than the original DMC for real time applications. Thus, the drawbacks of DMC for online identification or adaptive design could be avoided. The control of wind turbines is carried out in order to decrease the cost of wind energy by increasing the efficiency, and thus the energy capture, or by reducing structural loading and increasing the lifetimes of the components and turbine structures. Modeling of wind turbine has been carried out. Effect of noise and disturbance on the system has been also studied. The results obtained show that the proposed DEMM minimizes the effect of the disturbance and produces an accurate and smooth control. Significant improvements in the regulation of rotor speed at high wind speeds are obtained from the proposed DEMM, where control set points are obtained ahead of the disturbance, saving the turbine of the negative effects of them and thus increasing its lifetime. Copyright © 2012 John Wiley & Sons, Ltd.     

An enhanced deterministic beacon advertising algorithm for building TSCH networks

In this paper, we focus first on the time needed by a node to join a Time Slotted Channel Hopping (TSCH) network, this time is called joining time. Second, we are also interested in the network building time. Since the data generated by a sensor node remain unavailable as long as this node has not yet joined the wireless sensor network, these times are of prime importance for applications having strong latency requirements on data gathering. The joining time depends on the beacon advertising policy that has been left unspecified by the standard. The contribution of this paper is triple. First, we propose an Enhanced Deterministic Beacon Advertising algorithm, called EDBA, that ensures a collision-free advertising of beacons and minimizes the average joining time. Second, we model the behavior of a joining node by a Markov chain, validated by NS3 simulations, and compute the average joining time. Third, we compare the performance of EDBA with this of MBS, considered as the best beacon advertising algorithm in the literature.