Response Conflict Determines Sequential Effects in Serial Response Time Tasks With Short Response-Stimulus Intervals.

In serial choice reaction time (RT) tasks, performance in each trial critically depends on the sequence of preceding events. In this study, the authors specifically examined the mechanism underlying RT sequence effects at short response-stimulus intervals (RSIs), in which performance is impaired in the current trial N if events alternate rather than repeat from trial N - 2 to trial N - 1. Different accounts of this RT pattern in terms of perceptual noise, response-selection monitoring, and response conflict were tested in 4 experiments. Second-order RT costs were caused by the response sequence rather than the stimulus sequence. Manipulation of stimulus contrast, stimulus classification difficulty, and set-level compatibility did not modulate the response-related second-order RT effect, whereas this effect increased when spatially incompatible responses were demanded. These findings support a response conflict account of higher order sequential effects in short-RSI situations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Electrochemical reduction of dilute chromate solutions on carbon felt electrodes

Carbon felt is a potential material for electrochemical reduction of chromates. Very dilute solutions may be efficiently treated due to its large specific surface area and high porosity. In this work, the up-scaling of this technology is investigated using a new type of separated cell and once-through flow of industrial rinse water. A significant enhancement of the process is obtained due to copper deposition during long-term operation. The co-deposition and re-solution of copper occurs depending on the inlet chromate concentration. When previously deposited copper is present a current-free reduction of chromate takes place resulting in current efficiencies apparently above 100%. Very high space time yields are obtained even for effluents at low concentration and optimised conditions (high flow rates and pH 2). The economic feasibility of the technology is also considered. Continuous, single-pass operation results in lower energy requirements than batch processing. The economic potential of the process is also evaluated in comparison with chemical detoxification of chromate. The operating costs for the electrochemical treatment of very dilute effluents on a carbon felt electrode are 30% lower than for the chemical method.     

Interactive decision support in radiation therapy treatment planning

This paper proposes the use of an interactive decision support system to guide the treatment planning process for external beam radiation therapy. Based on multicriteria optimisation our research treatment planning software CARINA calculates efficient (also called Pareto optimal) treatment plans. These are stored in a database and accessed for evaluation by the treatment planner. The interactive component consists of navigation among the pre-calculated plans using free search, fine search and exact search as well as sensitivity analysis, which extracts dose dependence information for all structures from the plan database. As a result, plan quality is improved by finding advantageous trade-offs in competing treatment plans, trial-and-error is avoided, and effectiveness of treatment planning is increased.     

Influence of pharmaceutical residues on the structure of activated sludge bacterial communities in wastewater treatment bioreactors

Concern is growing over contamination of the environment with pharmaceuticals because of their widespread use and incomplete removal during wastewater treatment, where microorganisms drive the key processes. The influence of pharmaceuticals on bacterial community structure in activated sludge was assessed in small-scale wastewater treatment bioreactors containing different concentrations (5, 50, 200 and 500 μg L⁻¹) of several commonly used pharmaceuticals (ibuprofen, naproxen, ketoprofen, diclofenac and clofibric acid). T-RFLP analyses of the bacterial 16S rRNA genes indicated a minor but consistent shift in the bacterial community structure in the bioreactor R50 supplied with pharmaceuticals at a concentration of 50 μg L⁻¹, compared to the control reactor R0, which was operated without addition of pharmaceuticals. In the reactors operated with higher concentrations of pharmaceuticals, a greater structural divergence was observed. Bacterial community composition was further investigated by preparation of two clone libraries of bacterial 16S rRNA genes from reactors R0 and R50. Most clones in both libraries belonged to the Betaproteobacteria, among which Thauera, Sphaerotilus, Ideonella and Acidovorax-related spp. dominated. Nitrite-oxidizing bacteria of the genus Nitrospira sp., which are key organisms for the second stage of nitrification in wastewater treatment plants, were found only in the clone library of the reactor without pharmaceuticals. In addition, diversity indices were calculated for the two clone libraries, indicating a reduced diversity of activated sludge bacterial community in the reactor supplied with 50 μg L⁻¹ of each of selected pharmaceuticals.     

MIMO slotted ALOHA systems with collision resolution and truncated HARQ transmission and combining

In this paper, we investigate throughput and delay enhancement for two multi-user multiple-input multiple-output (MIMO) systems one with space-time block coding (STBC), the other with spatial multiplexing (SM) at the transmitter. Users operate using the slotted ALOHA (SA) protocol to access the wireless channel resulting in a high probability of collision. For both systems, we consider the uplink scenario, and we propose to recover the collided packets with spatial successive interference cancelation (SSIC) and a protocol for retransmission and combining of unsuccessfully received collided packets applying a truncated Hybrid Automatic Repeat reQuest (HARQ) scheme. For the first system, we propose to use channel realizations of collided packets as different signatures to separate them. Moreover, we propose a solution for the problem when the received powers are comparable. For this system, we note that the orthogonality of the STBC matrix allows the use of a simple linear processing step for the initialization of SSIC. For the SM multi-user system, the separation of collided packets is based on V-BLAST processing and SSIC. We also propose how to combine retransmitted packets. For both systems, we evaluate the block error rate, the throughput, and the delay. A comparison is done with the single-user case and with other receivers proposed in the literature.     

Detection of animal-derived proteins in feedstuffs in Italy: a reproducibility study

Bovine spongiform encephalopathy is a prion disease of ruminants that was first recognized in 1986 in the United Kingdom. Early in the epidemic, it became obvious that the presence of meat and bone meal in feed rations was a common factor in all bovine spongiform encephalopathy cases. The first ban of derived animal proteins in feed was enforced in Europe in 1994 and implemented by Regulation 999/2001 that prohibited the feeding of animal-derived protein to farm animals. The only official method currently accepted by the European Union Commission for test for the presence of animal-derived proteins in feedstuffs is feed microscopy. In Italy, monitoring of feedstuff safety is provided by both the Ministry of Health and the Ministry of Agriculture. The quality of official control, usually assessed by verifying the reproducibility and the accuracy of the testing method, is of fundamental importance for all laboratories and institutions using these results for comparative purposes. The aims of this study were to assess the reproducibility of the official method over all the Italian surveillance network and to provide a model for evaluating the performance of the monitoring system. The accuracy of the identification of the animal class of derived protein detected (avian, mammalian, or aquatic organism) was assessed. The interlaboratory agreement within the overall network reached 0.97 (95% confidence interval of 0.95 to 0.98) for determining the presence or absence of animal-derived proteins (e.g., for mammalian, avian, or aquatic species), and specificity of the identification of the animal class indicated that fish proteins are more easily recognized than are avian or mammalian proteins.     

Influence of pilot scale in pack pasteurization and sterilization treatments on nutritional and textural characteristics of carrot pieces

The current work presents a pilot scale study in which the effect of in pack thermal preservation processes in a retort system on particular carrot quality aspects, more specifically nutritional and textural characteristics, was investigated. Pasteurization as well as sterilization processes with different intensities were included. The carrot hardness, analyzed by a compression test, and the β-carotene bio-accessibility, analyzed by an in vitro digestion method, were the main quality markers. As a main conclusion, it can be stated that the results of this pilot scale study are a good validation of results obtained during previous laboratory scale experiments on carrot nutritional and textural characteristics. The processes applied in this study only resulted in limited conversion of all-trans-β-carotene to its cis-isomers. Furthermore, it was shown that intense thermal processing is required to observe a significant increase in the β-carotene bio-accessibility. However, this was accompanied with a clear degradation of the hardness. When thermal processing was preceded by low temperature blanching, a technique to improve texture retention of thermally processed plant-based foods, a lower β-carotene bio-accessibility was observed. Both observations clearly illustrated the inverse correlation between textural and nutritional characteristics of (processed) carrots. Statistical analyses confirmed the trends observed. For process design, the choice of the process intensity was identified to be crucial: the required product safety needs to be achieved, while still reaching an acceptable structural and nutritional quality. Exploring strategies to enhance the β-carotene bio-accessibility while ensuring an acceptable carrot texture can therefore be useful.     

Antifungal Effect of Allium tuberosum,Cinnamomum cassia,and Pogostemon cablin Essential Oils and Their Components Against Population of Aspergillus Species

Antifungal activity of Allium tuberosum (AT), Cinnamomum cassia (CC), and Pogostemon cablin (Patchouli, P) essential oils against Aspergillus flavus strains 3.2758 and 3.4408 and Aspergillus oryzae was tested at 2 water activity levels (a_w: 0.95 and 0.98). Main components of tested essential oils were: allyl trisulfide 40.05% (AT), cinnamaldehyde 87.23% (CC), and patchouli alcohol 44.52% (P). The minimal inhibitory concentration of the plant essential oils against A. flavus strains 3.2758 and 3.4408 and A. oryzae was 250 ppm (A. tuberosum and C. cassia), whereas Patchouli essential oil inhibited fungi at concentration > 1500 ppm. The essential oils exhibited suppression effect on colony growth at all concentrations (100, 175, and 250 ppm for A. tuberosum; 25, 50, and 75 for C. cassia; 100, 250, and 500 for P. cablin essential oil). Results of the study represent a solution for possible application of essential oil of C. cassia in different food systems due to its strong inhibitory effect against tested Aspergillus species. In real food system (table grapes), C. cassia essential oil exhibited stronger antifungal activity compared to cinnamaldehyde.     

A model to build manufacturing process chains during embodiment design phases

The methods for manufacturing process selection from early design phases avoid later mistakes and ensure the success during product manufacturing. Currently, the majority of the products need more than one manufacturing process to become finished parts. This is known as a manufacturing processes chain, and it is important that this manufacturing chain is well designed. This paper presents the bases and the activity model (IDEF?) to develop a decision-support system that helps designers and manufacturing engineers to configure manufacturing process chains while the product is being designed. The model schematizes all the activities and information involved in obtaining reliable manufacturing process chains. The support system has been applied to an air-bending die design process to be used to perform either air-bending or bottoming.     

Possibilities and limitations for high resolution small animal MRI on a clinical whole-body 3T scanner

Object

To investigate the potential of a clinical 3 T scanner to perform MRI of small rodents.

Materials and methods

Different dedicated small animal coils and several imaging sequences were evaluated to optimize image quality with respect to SNR, contrast and spatial resolution. As an application, optimal grey-white-matter contrast and resolution were investigated for rats. Furthermore, manganese-enhanced MRI was applied in mice with unilateral crush injury of the optic nerve to investigate coil performance on topographic mapping of the visual projection.

Results

Differences in SNR and CNR up to factor 3 and more were observed between the investigated coils. The best grey-white matter contrast was achieved with a high resolution 3D T ₂-weighted TSE (SPACE) sequence. Delineation of the retino-tectal projection and detection of defined visual pathway damage on the level of the optic nerve could be achieved by using a T ₁-weighted, 3D gradient echo sequence with isotropic resolution of (0.2?mm)³.

Conclusions

Experimental studies in small rodents requiring high spatial resolution can be performed by using a clinical 3 T scanner with appropriate dedicated coils.