Energy considerations for topology-unaware TDMA MAC protocols

Since the energy budget of mobile nodes is limited, the performance of a networking protocol for such users should be evaluated in terms of its energy efficiency, in addition to the more traditional metrics such as throughput. In this paper, two topology-unaware MAC protocols—in which the scheduling time slots are allocated irrespectively of the underline topology—are considered and their energy consumption is derived. It turns out that the per frame power consumption is lower for the less throughput-efficient protocol, suggesting that energy savings are achieved at the expense of throughput.A finer energy consumption study is carried out in the sequel, focusing on the amount of energy consumed to successfully transmit a certain number of packets, or equivalently, on the per successful transmission power consumption. It is shown that the more throughput-efficient protocol consumes less energy per successful transmission under certain conditions (which are derived), due to the lower number of transmission attempts before a data packet is successfully transmitted. The same energy-efficiency relation is observed under certain conditions (which are derived) when data packets are delay constrained and, thus, may become obsolete if not transmitted successfully within a specific time interval. The conditions under which the per successful transmission power consumption is minimized for delay-constrained packets, are also established in this work and it is observed that when the system throughput is maximized, the power consumed is close to the minimum. Simulation results support the claims and the expectations of the aforementioned analysis.     

Determination of gas dispersion in vapor extraction of heavy oil and bitumen

In this work, a mathematical model is developed and simulated to determine gas dispersion along with solubility during the vapor extraction (Vapex) of live oil from a laboratory scale physical model. The physical model is a rectangular block of homogenous porous medium saturated with heavy oil and bitumen. At a given temperature and pressure, the block is initially exposed on its side to a solvent gas, which diffuses into the medium and gets absorbed. The absorption of gas reduces the viscosity of heavy oil and bitumen causing it to drain under gravity. The low-viscosity “live oil” is produced at the bottom of the porous block. The production of live oil with time is accompanied by the shrinkage of oil in the block as well as its increased exposure to gas from top. These phenomena of Vapex are described by the mathematical model, which is used to calculate live oil production with various values of gas solubility and dispersion. Their optimal values are determined for the vapor extraction of Cold Lake bitumen with butane by matching calculated live oil production with its experimental values published earlier.     

Design and Analysis of an Efficient Communication Strategy for Hierarchical and Highly Changing Ad-hoc Mobile Networks

In this work we introduce two practical and interesting models of ad-hoc mobile networks: (a) hierarchical ad-hoc networks, comprised of dense subnetworks of mobile users interconnected by a very fast yet limited backbone infrastructure, (b) highly changing ad-hoc networks, where the deployment area changes in a highly dynamic way and is unknown to the protocol. In such networks, we study the problem of basic communication, i.e., sending messages from a sender node to a receiver node. For highly changing networks, we investigate an efficient communication protocol exploiting the coordinated motion of a small part of an ad-hoc mobile network (the runners support) to achieve fast communication. This protocol instead of using a fixed sized support for the whole duration of the protocol, employs a support of some initial (small) size which adapts (given some time which can be made fast enough) to the actual levels of traffic and the (unknown and possibly rapidly changing) network area, by changing its size in order to converge to an optimal size, thus satisfying certain Quality of Service criteria. Using random walks theory, we show that such an adaptive approach is, for this class of ad-hoc mobile networks, significantly more efficient than a simple non-adaptive implementation of the basic runners support idea, introduced in [9,10]. For hierarchical ad-hoc networks, we establish communication by using a runners support in each lower level of the hierarchy (i.e., in each dense subnetwork), while the fast backbone provides interconnections at the upper level (i.e., between the various subnetworks). We analyze the time efficiency of this hierarchical approach. This analysis indicates that the hierarchical implementation of the support approach significantly outperforms a simple implementation of it in hierarchical ad-hoc networks. Finally, we discuss a possible combination of the two approaches above (the hierarchical and the adaptive ones) that can be useful in ad-hoc networks that are both hierarchical and highly changing. Indeed, in such cases the hierarchical nature of these networks further supports the possibility of adaptation.     

Facial expression recognition in image sequences using geometric deformation features and Support Vector Machines.

In this paper, two novel methods for facial expression recognition in facial image sequences are presented. The user has to manually place some of Candide grid nodes to face landmarks depicted at the first frame of the image sequence under examination. The grid-tracking and deformation system used, based on deformable models, tracks the grid in consecutive video frames over time, as the facial expression evolves, until the frame that corresponds to the greatest facial expression intensity. The geometrical displacement of certain selected Candide nodes, defined as the difference of the node coordinates between the first and the greatest facial expression intensity frame, is used as an input to a novel multiclass Support Vector Machine (SVM) system of classifiers that are used to recognize either the six basic facial expressions or a set of chosen Facial Action Units (FAUs). The results on the Cohn-Kanade database show a recognition accuracy of 99.7% for facial expression recognition using the proposed multiclass SVMs and 95.1% for facial expression recognition based on FAU detection.     

Trust establishment in cooperative wireless relaying networks

In cooperative wireless networks, relay nodes are employed to improve the performance of the network in terms of throughput and reliability. However, the presence of malicious relay nodes in the network may severely degrade the performance of the system. When a relay node behaves maliciously, there exists a possibility that such a node refuses to cooperate when it is selected for cooperation or deliberately drops the received packets. Trust establishment is a mechanism to detect misbehaving nodes in a network. In this paper, we propose a trust establishment method for cooperative wireless networks by using Bayesian framework. In contrast with the previous schemes proposed in wireless networks, this approach takes the channel state information and the relay selection decisions into account to derive a pure trust value for each relay node. The proposed method can be applied to any cooperative system with a general relay selection policy whose decisions in each cooperative transmission are independent of the previous ones. Moreover, it does not impose additional communication overhead on the system as it uses the available information in relay selection procedure. Copyright © 2012 John Wiley & Sons, Ltd.     

Optimization of injection molding design. Part I: Gate location optimization

The placement of a gate in an injection mold is one of the most important variables of the total mold design. The quality of the molded part is greatly affected by the gate location, because it influences the manner in which the plastic flows into the mold cavity. Some defects, such as weldline and overpack, can be effectively controlled only by the gate location. Therefore, the product quality can be greatly improved by determining the optimum gate location. In this paper, we develop a general methodology for gate location optimization. We first quantify quality in terms of flow simulation outputs. We can thus assess detrimental effects such as warpage and dimensional instability as a function of the independent variable, which is in this case the gate location. Next we develop methods to search for the optimum gate location. The search method introduced in this paper is a method that combines a deterministic hill climbing search with a stochastic annealing search method. The method is appropriately called simulated annealing and hill climbing (SANHIL). The criteria used for evaluation during the search process are a function of the flow simulation outputs. We demonstrate the success of the method for a complex industrial mold. The approach is applicable to any complex mold geometry and any plastic.     

Road to Next Generation Mobile Networks: An Evolutionary Dynamics Approach

One of the major challenges that mobile operators (MOs) are faced with nowadays is the transition to 4th Generation (4G) mobile communication technologies. The main reason for this lies on the reluctance of MOs to invest in a new technology without being sure about its success. The current paper investigates the decision-making procedures of a MO that wishes to migrate from its current technology type to 4G. Traditionally, the decision of deploying a new technology has been based on the analysis of similar implementations in other countries. However, such approaches can be inefficient and time consuming, as there are discrepancies concerning the technological progress among different countries. To this end, the authors employ evolutionary game theory to model the interactions of the MO’s decisions and the subscribers’ needs, and propose a practical and efficient qualitative model that identifies the circumstances under which the transition towards 4G networking can be facilitated. Specifically, the mathematical foundation of the decision making process is provided and the key role of the charging price and the quality of experience by the subscribers for using 4G connectivity is proven. With the process of 4G deployment still ongoing, this paper aims to present an analysis that can be used supplementary to the decision process of a MO that aims to evolve his network.     

A New Family of Ultralow Loss Reversible Phase‐Change Materials for Photonic Integrated Circuits: Sb2S3 and Sb2Se3

Phase‐change materials (PCMs) are seeing tremendous interest for their use in reconfigurable photonic devices; however, the most common PCMs exhibit a large absorption loss in one or both states. Here, Sb₂S₃ and Sb₂Se₃ are demonstrated as a class of low loss, reversible alternatives to the standard commercially available chalcogenide PCMs. A contrast of refractive index of Δn = 0.60 for Sb₂S₃ and Δn = 0.77 for Sb₂Se₃ is reported, while maintaining very low losses (k < 10^?5) in the telecommunications C‐band at 1550 nm. With a stronger absorption in the visible spectrum, Sb₂Se₃ allows for reversible optical switching using conventional visible wavelength lasers. Here, a stable switching endurance of better than 4000 cycles is demonstrated. To deal with the essentially zero intrinsic absorption losses, a new figure of merit (FOM) is introduced taking into account the measured waveguide losses when integrating these materials onto a standard silicon photonics platform. The FOM of 29 rad phase shift per dB of loss for Sb₂Se₃ outperforms Ge₂Sb₂Te₅ by two orders of magnitude and paves the way for on‐chip programmable phase control. These truly low‐loss switchable materials open up new directions in programmable integrated photonic circuits, switchable metasurfaces, and nanophotonic devices.