Free-radical synthesis of narrow polydispersed 2-hydroxyethyl methacrylate-based tetrapolymers for dilute aqueous base developable negative photoresists

Novel (meth)acrylate tetrapolymers based on 2-hydroxyethyl methacrylate (HEMA) were synthesized via free-radical polymerization in refluxing xylene under monomer-starved conditions for use in negative photoresist formulations. 2,2′-Azobis(2-methylbutyronitrile) was used as initiator and 2-mercaptoethanol as chain transfer agent. Optimized resist formulations were obtained with a relatively narrow polydispersed (D=1.86) low molecular weight copolymer (M_n=1677) of 2-hydroxyethyl methacrylate (HEMA), isobornyl methacrylate (IBMA), cyclohexyl methacrylate (CHMA) and acrylic acid (AA), in a 40/30/23/7 weight ratio. A novel high-resolution single layer negative tone photoresist suitable for 193 nm and e-beam lithography that meets basic performance requirements (aqueous-base development, enhanced etch resistance, sub-0.2 μm resolution) was developed from the aforementioned (meth)acrylate tetrapolymer, the poly(2-hydroxyethyl methacrylate-co-cyclohexyl methacrylate-co-isobornyl methacrylate-co-acrylic acid) (PHECIMA) and a sulfonium salt photo acid generator. The key-components for the negative image formation (photoacid induced crosslinking) are the hydroxyl groups of the HEMA moieties. The swelling-free negative resist material was developed in diluted aqueous base [tetramethyl ammonium hydroxide, (TMAH) 0.26×10⁻²N] and presented enhanced etch resistance without the use of etch resistance promoters. 0.20-0.14 μm lines were obtained upon 193 nm and/or e-beam lithography.     

Armenian cochineal (Porphyrophora hamelii) and purpurin‐rich madder in ancient polychromy

Samples removed from funeral figurines, dated the third to the second century BC (Hellenistic period) and found in Macedonia, Greece, are investigated using high‐performance liquid chromatography. Two results are reported that provide new insights into ancient polychromy. Firstly, high‐performance liquid chromatography results, in combination with historical information, indicate that insect species of cochineal, most probably Porphyrophora hamelii Brandt, was used in Hellenistic objects. Secondly, madder detected in the archaeological samples contains high amounts of purpurin (alizarin is either not detected or detected in trace). This relative composition, which is recorded using the hydrochloric acid method for dyestuff extraction, is consistent with that prepared from wild madder (Rubia peregrina L.), which is a common plant in the Mediterranean region.     

Structure,morphology, and photoluminescence of porous Si nanowires: effect of different chemical treatments

The structure and light-emitting properties of Si nanowires (SiNWs) fabricated by a single-step metal-assisted chemical etching (MACE) process on highly boron-doped Si were investigated after different chemical treatments. The Si nanowires that result from the etching of a highly doped p-type Si wafer by MACE are fully porous, and as a result, they show intense photoluminescence (PL) at room temperature, the characteristics of which depend on the surface passivation of the Si nanocrystals composing the nanowires. SiNWs with a hydrogen-terminated nanostructured surface resulting from a chemical treatment with a hydrofluoric acid (HF) solution show red PL, the maximum of which is blueshifted when the samples are further chemically oxidized in a piranha solution. This blueshift of PL is attributed to localized states at the Si/SiO₂ interface at the shell of Si nanocrystals composing the porous SiNWs, which induce an important pinning of the electronic bandgap of the Si material and are involved in the recombination mechanism. After a sequence of HF/piranha/HF treatment, the SiNWs are almost fully dissolved in the chemical solution, which is indicative of their fully porous structure, verified also by transmission electron microscopy investigations. It was also found that a continuous porous Si layer is formed underneath the SiNWs during the MACE process, the thickness of which increases with the increase of etching time. This supports the idea that porous Si formation precedes nanowire formation. The origin of this effect is the increased etching rate at sites with high dopant concentration in the highly doped Si material.     

Facile Reduction of Nitroarenes into Anilines and Nitroalkanes into Hydroxylamines via the Rapid Activation of Ammonia⋅ Borane Complex by Supported Gold Nanoparticles

Gold nanoparticles supported on titania catalyse, even at a ppm loading level, the quantitative reduction of nitroarenes into anilines and nitroalkanes into alkylhydroxylamines by the ammonia⋅ borane complex. No dehalohalogenation was seen in the case of chloro‐ or bromonitroarenes, while ester, cyano, or carboxylic acid functionalities also remain intact. The nitroarene to aniline reduction pathway does not require nitrosoarenes as intermediate products.     

Antibacterial Activity of Copper Nanoparticles against Xanthomonas campestris pv. vesicatoria in Tomato Plants

Copper-based bactericides have appeared as a new tool in crop protection and offer an effective solution to combat bacterial resistance. In this work, two copper nanoparticle products that were previously synthesized and evaluated against major bacterial and fungal pathogens were tested on their ability to control the bacterial spot disease of tomato. Growth of Xanthomonas campestris pv. vesicatoria, the causal agent of the disease, was significantly suppressed by both nanoparticles, which had superior function compared to conventional commercial formulations of copper. X-ray fluorescence spectrometry measurements in tomato leaves revealed that bioavailability of copper is superior in the case of nanoparticles compared to conventional formulations and is dependent on synthesis rather than size. This is the first report correlating bioavailability of copper to nanoparticle efficacy.     

A Role for Human Renal Tubular Epithelial Cells in Direct Allo-Recognition by CD4+ T-Cells and the Effect of Ischemia-Reperfusion

Direct allorecognition is the earliest and most potent immune response against a kidney allograft. Currently, it is thought that passenger donor professional antigen-presenting cells (APCs) are responsible. Further, many studies support that graft ischemia-reperfusion injury increases the probability of acute rejection. We evaluated the possible role of primary human proximal renal tubular epithelial cells (RPTECs) in direct allorecognition by CD4+ T-cells and the effect of anoxia-reoxygenation. In cell culture, we detected that RPTECs express all the required molecules for CD4+ T-cell activation (HLA-DR, CD80, and ICAM-1). Anoxia-reoxygenation decreased HLA-DR and CD80 but increased ICAM-1. Following this, RPTECs were co-cultured with alloreactive CD4+ T-cells. In T-cells, zeta chain phosphorylation and c-Myc increased, indicating activation of T-cell receptor and co-stimulation signal transduction pathways, respectively. T-cell proliferation assessed with bromodeoxyuridine assay and with the marker Ki-67 increased. Previous culture of RPTECs under anoxia raised all the above parameters in T-cells. FOXP3 remained unaffected in all cases, signifying that proliferating T-cells were not differentiated towards a regulatory phenotype. Our results support that direct allorecognition may be mediated by RPTECs even in the absence of donor-derived professional APCs. Also, ischemia-reperfusion injury of the graft may enhance the above capacity of RPTECs, increasing the possibility of acute rejection.     

Superparamagnetic polyvinylpyrrolidone/chitosan/Fe3O4 electrospun nanofibers as effective U(VI) adsorbents

Magnetoactive electrospun fibrous membranes consisting of polyvinylpyrrolidone (PVP), chitosan (CS) and pre-fabricated, double-layer oleic acid-coated magnetite nanoparticles (OA.OA.Fe₃O₄) were fabricated and evaluated as new adsorbent materials for the removal and recovery of uranium (U(VI)) from aqueous solutions. The adsorption has been investigated by batch-type experiments and the solid material has been characterized by X-ray diffraction spectroscopy (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy/energy dispersive X-ray analysis (TEM/EDX) and vibration sample magnetometry (VSM) measurements prior and after uranium adsorption. The experimental adsorption data were found to be well fitted with the Langmuir isotherm and the pseudo-second order kinetic model. The results indicate that PVP/CS/OA.OA.Fe₃O₄ fibrous adsorbents exhibit good adsorption properties towards U(VI) in aqueous solutions, achieving a q_max value of 0.77 mol kg⁻¹ (183.3 mg g⁻¹) at pH 6.0. The experiments regarding the regeneration and reuse of the magnetoactive adsorbents were carried out using Na₂CO₃, at pH ~11. After four cycles, the percentage relative adsorption remained stable (~100%) whereas the desorption percentage decreased from 31.9% to 21.0%. Generally, the presented results demonstrate that the incorporation of the Fe₃O₄ NPs has a positive effect on the adsorption efficiency of U(VI) from aquatic environments.     

Modeling drop breakage using the full energy spectrum and a specific realization of turbulence anisotropy

The assumption of homogeneous isotropic turbulence when modeling drop breakage in industrially relevant geometries is questionable. We describe the development of an anisotropic breakage model, where the anisotropy is introduced via the inclusion of a perturbed turbulence spectrum. The selection of the perturbed spectrum is itself motivated by our previous large-eddy simulations of high-pressure homogenizers. The model redistributes energy from small to large scales, and assumes that the anisotropic part of the Reynolds stresses is confined to the energy-containing range. The second-order structure function arising from the perturbed spectrum is used in the standard framework of Coulaloglou and Tavlarides to calculate breakage frequency. While the base model exhibits non-monotonic behavior (by predicting a maximum value for a certain drop size), the effect of anisotropy is shown to increase breakage frequency in length scales larger than this peak, thereby reducing non-monotonicity. This effect is more pronounced for small turbulence Reynolds numbers.