C/C-SiC component for metallic phase change materials

Thanks to their high energy density and thermal conductivity, metallic Phase Change Materials (mPCM) have shown great potential to improve the performance of thermal energy storage systems. However, the commercial application of mPCM is still limited due to their corrosion behavior with conventional container materials. This work first addresses on a fundamental level, whether carbon-based composite-ceramics are suitable for corrosion critical components in a thermal storage system. The compatibility between the mPCM AlSi₁₂ and the Liquid Silicon Infiltration (LSI)-based carbon fiber reinforced silicon carbide (C/C-SiC) composite is then investigated via contact angle measurements, microstructure analysis, and mechanical testing after exposure. The results reveal that the C/C-SiC composite maintains its mechanical properties and microstructure after exposure in the strongly corrosive mPCM. Based on these results, efforts were made to design and manufacture a container out of C/C-SiC for the housing of mPCM in vehicle application. The stability of the component filled with mPCM was proven nondestructively via computer tomography (CT). Successful thermal input- and output as well as thermal storage ability were demonstrated using a system calorimeter under conditions similar to the application. The investigated C/C-SiC composite has significant application potential as a structural material for thermal energy storage systems with mPCM.     

Identification of chemical markers for the sensory shelf-life of saveloy

The aroma composition, the microbial composition and the sensory profile were measured in sliced saveloy samples packed in modified atmosphere (MA). The main objective was to identify aroma compounds with potential as chemical markers to identify the sensory changes of saveloy. The 60 aroma compounds isolated from the saveloy samples by dynamic headspace extraction and measured by Gas Chromatography Mass Spectrometry (GC-MS) were used to model the sensory attributes sour&old odour and meaty odour using partial least squares regression (PLS). 2- and 3-methylbutanal, 2- and 3-methylbutanol, acetoin and diacetyl were found to have the highest impact on both sour&old odour and meaty odour of the samples. The results show that these four aroma compounds have high potential as chemical markers for the sensory shelf-life of sliced and MA-packed saveloy.     

Diagenetic transformation of dissolved organic nitrogen compounds under contrasting sedimentary redox conditions in the Black Sea

Remineralization of organic matter in reactive marine sediments releases nutrients and dissolved organic matter (DOM) into the ocean. Here we focused on the molecular-level characterization of DOM by high-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) in sediment pore waters and bottom waters from contrasting redox regimes in the northern Black Sea with particular emphasis on nitrogen-bearing compounds to derive an improved understanding of the molecular transformations involved in nitrogen release. The number of nitrogen-bearing molecules is generally higher in pore waters than in bottom waters. This suggests intensified degradation of nitrogen-bearing precursor molecules such as proteins in anoxic sediments: No significant difference was observed between sediments deposited under oxic vs anoxic conditions (average O/C ratios of 0.55) suggesting that the different organic matter quality induced by contrasting redox conditions does not impact protein diagenesis in the subseafloor. Compounds in the pore waters were on average larger, less oxygenated, and had a higher number of unsaturations. Applying a mathematical model, we could show that the assemblages of nitrogen-bearing molecular formulas are potential products of proteinaceous material that was transformed by the following reactions: (a) hydrolysis and deamination, both reducing the molecular size and nitrogen content of the products and intermediates; (b) oxidation and hydration of the intermediates; and (c) methylation and dehydration.     

MgAl2O4-Spinel Synthesized by High-Energy Ball Milling and Reaction Sintering

A new way to prepare magnesia-alumina-spinel was investigated making use of a mixed powder system of MgO and metallic Al-3 wt% Mg. Intensive ball milling was applied which provides the formation of new powder particles as composite of both components in intimate contact. The new configuration of the particles had a significant impact on the reaction sintering behavior leading to single phase spinel microstructures at moderate temperatures below 1400°C. Optimized milling of the powder mixture was therefore required providing reduced crystallite sizes and strongly enlarged interfacial area shared by the reacting components. The optimal milling time was identified by the complete reaction of the starting powders to spinel during sintering. Shorter milling times led to incomplete reactions and longer milling times contaminated the milling product by debris from the milling tools. The amount of interfaces generated by the intimate mixing dominated the sintering reaction kinetics whereas the specific surfaces area was of secondary importance.     

Adaptation of the ToxRTool to Assess the Reliability of Toxicology Studies Conducted with Genetically Modified Crops and Implications for Future Safety Testing

To determine the reliability of food safety studies carried out in rodents with genetically modified (GM) crops, a Food Safety Study Reliability Tool (FSSRTool) was adapted from the European Centre for the Validation of Alternative Methods’ (ECVAM) ToxRTool. Reliability was defined as the inherent quality of the study with regard to use of standardized testing methodology, full documentation of experimental procedures and results, and the plausibility of the findings. Codex guidelines for GM crop safety evaluations indicate toxicology studies are not needed when comparability of the GM crop to its conventional counterpart has been demonstrated. This guidance notwithstanding, animal feeding studies have routinely been conducted with GM crops, but their conclusions on safety are not always consistent. To accurately evaluate potential risks from GM crops, risk assessors need clearly interpretable results from reliable studies. The development of the FSSRTool, which provides the user with a means of assessing the reliability of a toxicology study to inform risk assessment, is discussed. Its application to the body of literature on GM crop food safety studies demonstrates that reliable studies report no toxicologically relevant differences between rodents fed GM crops or their non-GM comparators.     

Heat/mass transfer from a neutrally buoyant sphere by mixed natural and forced convection in a simple shear flow

Building on the work of Yang et al. in 2011, the finite difference method and the Boussinesq approximation were applied to solve the time‐dependent Navier‐Stokes, convection diffusion and continuity equations in spherical coordinates. An idealized condition, the mass transfer from a neutrally buoyant sphere in a horizontal simple shear flow with natural convection was numerically simulated for the first time in this work. In the hybrid transfer case, the outwardly spiraling streamlines enhanced the transfer process, but the counter‐gravity spiraling streamlines near the sphere hindered the natural convection and the spatial dilution action weakened the natural convection transfer process. These competing effects led to nonmonotonic behavior of the Nusselt number with Reynolds number. Results from these previously undocumented cases were summarized into correlations for predicting Nusselt numbers at finite Reynolds numbers for various Grashof and Prandtl numbers. © 2018 American Institute of Chemical Engineers AIChE J, 64: 2816–2827, 2018     

Determining profits for solar energy with remote sensing data

The objects of the article are to determine the profits for solar energy integrating remote sensing data: the optimal locations of photovoltaic and the base price of electricity resulting from solar energy. An illustrated experiment with five European countries data sets is taken. Results indicate that Germany is the only optimal region to set up photovoltaic so as to satisfy the electricity demand of the five considered. Results also show that solar energy is a promising energy source since the highest base price of electricity resulting from solar energy is only 0.35 $/kWh. The base electricity price for Germany is the lowest whereas the base electricity price for Italy is the highest. Moreover, the results further indicate that the photovoltaic module price plays a key role in determining the best appropriate region(s) to install photovoltaic and the base electricity price.     

New Carbohydrate Derivatives from Biotechnical and Chemical Processes

Starch, its derivatives and hydrolysis products are well established as industrial products for the food and technical industries. More advanced products, based on starch, are available today, manufactured by biotechnical and chemical processes. They comprise a variety of monomeric compounds like polyols, hydroxycarboxylic acids, glycosides and their derivatives obtained by esterification, etherification and amination. In addition, interesting oligomeric and polymeric products are accessible, based on starch and its derivatives. Selected examples of these products are described as well as their respective production methods. For some products the chemicals synthesis will be compared with the fermentation route, analysing the relative advantages and disadvantages of both. The wide application potential of these “new” products is illustrated with reference to their use in different industries, e. g. in the manufacturing and processing of resins, polymers, detergents, cosmetics, pharmaceuticals and processed foods. Special emphasis will be given to the structural peculiarities of these carbohydrate derivatives, for example chirality, which enables them to act as unique intermediates in the production of biologically active products.     

New Industrial Products from Starch

The industrial (non-food) use of starch and starch-based products as renewable raw materials is discussed together with examples, in the following application areas:

• –Starch as auxiliary raw material: binder, adhesive, thickener, protective colloid.
• –Starch as raw material for new products in chemical or biotechnical processes: polyols, acids, polysaccharides, enzymes.
• –Starch as filler with specific functionality for synthetic polymers to improve application properties in e. g. polyethylene, polypropylene, polystyrene, polyurethane-foams, styrene/butadiene copolymers, polyvinylchloride.
• –Starch as reactive component to be incorporated during production of synthetic polymers leading to synergistic effects: urea/formaldehyde resins, phenolic resins, alkyd- and melamine resins.
• –Starch-based active materials which either exhibit direct functionality themselves, (e. g. as surfactants, sequestrants and bleaching boosters) or which represent building blocks for the synthesis of chiral compounds for the pharmaceutical or the agro-industries.

     

Herstellung von Phenolharzen unter Verwendung von Stärkeprodukten

Usage of Starchy Products for Preparation of Phenolic Resins. Incorporation of starches and starch hydrolysates in phenolic resins of novolak and resol type has been investigated via acid catalyzed dehydration to 5-hydroxymethylfurfural (HMF) in the presence of phenol and formaldehyde. Due to formation of HMF/phenol-condensates savings up to 40% phenol and 65% formaldehyde are possible in comparison to commercial resins. Besides very low amounts of residual monomers, curing is accelerated with increased carbohydrate incorporation, which can be used to reduce time consuming manufacturing processes. Especially starch hydrolysates with different average molecular weights can be used in a very flexible way to achieve special requirements like softening points, mol weight distributions, viscosities and curing behaviour.