Failure of silver nanowire transparent electrodes under current flow

Silver nanowire transparent electrodes have received much attention as a replacement for indium tin oxide, particularly in organic solar cells. In this paper, we show that when silver nanowire electrodes conduct current at levels encountered in organic solar cells, the electrodes can fail in as little as 2 days. Electrode failure is caused by Joule heating which causes the nanowires to breakup and thus create an electrical discontinuity in the nanowire film. More heat is created, and thus failure occurs sooner, in more resistive electrodes and at higher current densities. Suggestions to improve the stability of silver nanowire electrodes are given.     

Fe(PyTACN)‐Catalyzed cis‐Dihydroxylation of Olefins with Hydrogen Peroxide

A family of iron complexes with general formula [Fe(II)(^R,Y,XPyTACN)(CF₃SO₃)₂], where ^R,Y,XPyTACN=1‐[2′‐(4‐Y‐6‐X‐pyridyl)methyl]‐4,7‐dialkyl‐1,4,7‐triazacyclononane, X and Y refer to the groups at positions 4 and 6 of the pyridine, respectively, and R refers to the alkyl substitution at N‐4 and N‐7 of the triazacyclononane ring, are shown to be catalysts for efficient and selective alkene oxidation (epoxidation and cis‐dihydroxylation) employing hydrogen peroxide as oxidant. Complex [Fe(II)(^Me,Me,HPyTACN)(CF₃SO₃)₂] ( 7 ), was identified as the most efficient and selective cis‐dihydroxylation catalyst among the family. The high activity of 7 allows the oxidation of alkenes to proceed rapidly (30 min) at room temperature and under conditions where the olefin is not used in large amounts but instead is the limiting reagent. In the presence of 3 mol% of 7 , 2 equiv. of H₂O₂ as oxidant and 15 equiv. of water, in acetonitrile solution, alkenes are cis‐dihydroxylated reaching yields that might be interesting for synthetic purposes. Competition experiments show that 7 exhibits preferential selectivity towards the oxidation of cis olefins over the trans analogues, and also affords better yields and high [syn‐diol]/[epoxide] ratios when cis olefins are oxidized. For aliphatic substrates, reaction yields attained with the present system compare favourably with state of the art Fe‐catalyzed cis‐dihydroxylation systems, and it can be regarded as an attractive complement to the iron and manganese systems described recently and which show optimum activity against electron‐deficient and aromatic olefins.     

Sugar fatty acid ester surfactants: Base-catalyzed hydrolysis

Rate constants for the base-catalyzed hydrolysis of sucrose laurate, sucrose α-sulfonyl laurate, and sucrose α-ethyl laurate were measured at several temperatures in pH 11 buffer. Activation energies and Arrhenius factors for the hydrolysis reactions were determined. At 27°C, sucrose laurate hydrolyzed fastest and sucrose α-ethyl laurate slowest. Activation energies and Arrhenius factors showed that both steric and electronic factors affect the rates of ester hydrolysis. Other work has shown that bacterial hydrolysis of sugar fatty acid esters is inhibited in the presence of either α-sulfonyl or α-alkyl groups. A kinetic study of base-catalyzed ester hydrolysis has revealed reasons for the inhibition of bacterial hydrolysis and provided information regarding ester stability at elevated pH.     

Sugar fatty acid ester surfactants: Structure and ultimate aerobic biodegradability

Ultimate aerobic biodegradabilities of an array of sugar ester surfactants were determined by International Standards Organisation method 7827, “Water Quality—Evaluation in an Aqueous Medium of the Aerobic Biodegradability of Organic Compounds, Method by Dissolved Organic Carbon” (1984). The surfactants were nonionic sugar esters with different-sized sugar head groups (formed from glucose, sucrose, or raffinose) and different lengths and numbers of alkyl chains [formed from lauric (C₁₂) or palmitic (C₁₆) acid]. Analogous anionic sugar ester surfactants, formed by attaching an α-sulfonyl group adjacent to the ester bond, and sugar esters with α-alkyl substituents were also studied. It was found that variations in sugar head group size or in alkyl chain length and number do not significantly affect biodegradability. In contrast, the biodegradation rate of sugar esters with α-sulfonyl or α-alkyl groups, although sufficient for them to be classified as readily biodegradable, was dramatically reduced compared to that of the unsubstituted sugar esters. An understanding of the relationship between structure and biodegradability provided by the results of this study will aid the targeted design of readily biodegradable sugar ester surfactants for use in consumer products.     

Synthesis and properties of aminopropyl nucleic acids

Oligonucleotides that contain up to three aminopropyl nucleoside analogues have been synthesized. Dimers of aminopropyl adenine and thymidine were prepared and used as building blocks by applying phosphoramidite chemistry. Both R and S isomers of the aminopropyl nucleosides were used. This incorporation led to a reduction of thermal stability of double-stranded DNA. Furthermore, the (R)-adenine analogue, which yielded (S)-APNA, can be considered as a candidate for universal base pairing.     

New Structural Variants of Homoserine Lactones in Bacteria

N‐Acylhomoserine lactones (AHLs) are used by a wide variety of bacteria for cell–cell communication in “quorum‐sensing”. These compounds are derived from L ‐homoserine lactone and a fatty acid, which varies in chain‐length, degree of saturation, and the presence or absence of an oxygen atom at C‐3. In this study we describe for the first time the occurrence of acyl chains carrying a methyl branch, and present a GC‐MS‐based method that can be used to distinguish these compounds from unbranched isomers. The bacterium Aeromonas culicicola produces several methyl branched AHLs. In Jannaschia helgolandensis—a marine bacterium of the Roseobacter clade—a doubly unsaturated AHL, (2E,9Z)‐N‐(2,9‐hexadecadienoyl)‐L ‐homoserine lactone, occurs. The location and configuration of the double bonds was proven by spectrometric investigation and synthesis. Finally, a method was developed to establish the absolute configuration of 3‐hydroxyalkanoyl‐HSLs by mild cleavage and chiral gas chromatography. The AHLs synthesized during this study were tested in sensor systems specific for certain AHL types. The results show that these compounds display varying responses to the respective sensors; this underlines the importance of determining the whole bouquet of AHLs and its function to fully understand their importance for regulatory functions in bacteria.     

Pt–Ba–Al2O3 for NOx storage and reduction: Characterization of the dispersed species

Pt–Ba–Al₂O₃ active and selective for NO_x storage and selective reduction to N₂ has been prepared and tested. Characterization of the parent Al₂O₃, Pt–Al₂O₃ and Ba–Al₂O₃ materials, as well as of Pt–Ba–Al₂O₃ catalyst in the oxidized, reduced and sulphated state has been performed by FT-IR spectroscopy of low-temperature adsorbed carbon monoxide and of adsorbed acetonitrile. XRD, TEM and XPS analyses have also been performed. Evidence for the predominance of Ba species, which are highly dispersed on the alumina support surface, and may be carbonated or sulphated, has been provided. Competitive interaction of Pt and Ba species with the surface sites of alumina has also been found.     

Effect of HCl pre-treatment on corrosion resistance of cerium-based conversion coatings on magnesium and magnesium alloys

The corrosion protection afforded by a cerium conversion coating, formed by immersion in a solution containing rare earth salt and hydrogen peroxide, on pure magnesium and two magnesium alloys, AZ91 and AM50, has been studied. The effect of HCl pre-treatments on the morphology and on the corrosion resistance of the cerium conversion layer was investigated. A thicker and more homogeneous distribution of the conversion coating was obtained when the sample surface was pre-treated with acid. Higher amounts of cerium on the surface of the pre-treated samples were detected. The cerium conversion coating increased the corrosion resistance of the alloys because it ennobled the corrosion potential and decreased both the anodic and cathodic current. The acid pre-treatment further increased the corrosion resistance of the coated alloys. After five days of immersion in chloride environment the untreated samples showed localized corrosion while the chemical conversion coated samples appeared unaffected.