The Vortex Core Excitation Spectrum in Gapped Topological d-wave Superconductors

There are indications that some high temperature unconventional superconductors have a “complex” d-wave order parameter (with an admixture of s-wave) leading to nonzero energy gap. Since the coherence length is short and the Fermi energy is relatively small the quasiclassical approach is inapplicable and the more complicated Bogoliubov-deGennes equations should be used to investigate the excitation spectrum of such a material in a magneric field. It turns out that equations for the chiral d-wave superconductor simplify considerably and is the basis for any superconductor of that type with a sufficiently large gap. The spectrum of core excitations of the Abrikosov vortex in an anisotropic 3D sample exhibits several features. Unlike in conventional and gapless superconductors the core has a single excitation mode of order energetic gap for each value of momentum along the field. This has a large impact on thermal transport and vortex dynamics.     

Vacuum Carbothermic Reduction of Alumina

The current industrial production of aluminum from alumina is based on the electrochemical Hall-Héroult process, which has the drawbacks of high-greenhouse gas emissions, reaching up to 0.70 kg CO_2-equiv/kg Al, and large energy consumption, about 0.055 GJ/kg Al. An alternative process is the carbothermic reduction of alumina. Thermodynamic equilibrium calculations and experiments by induction furnace heating indicated that this reaction could be achieved under atmospheric pressure only above 2200°C. Lower required reaction temperatures can be achieved by alumina reduction under vacuum. This was experimentally demonstrated under simulated concentrated solar illumination and by induction furnace heating. By decreasing the CO partial pressure from 3.5 mbar to 0.2 mbar, the temperature required for almost complete reactant consumption could be decreased from 1800°C to 1550°C. Deposits condensed on the relatively cold reactor walls contained up to 71 wt% of Al. Almost pure aluminum was observed as Al drops, while a gray powder contained 60–80% Al and a yellow-orange powder contained only Al₄C₃, Al-oxycarbides and Al₂O₃.     

Characteristics of Zinc Corrosion and Formation of Conversion Films on the Zinc Surface in Acidic Solutions of Cr(III) Compounds

The influence of the components of an acidic solution: Cr(III) nitrate-malonic acid-Co(II) salt and treatment conditions on zinc dissolution and formation of Chromate films as well as on their decorative and protective properties have been studied using the analytical, XPS, structural and accelerated corrosion test methods. An organic acid is the main component, which has an essential influence on zinc dissolution and formation of Chromate films as well as their decorative and protective properties. The influence of organic acid is directly related with the state of the Cr³⁺ ions in chromating solution. When the Cr³⁺ ions are in the form of hexaaquaions, the organic acid increases the quantities of the zinc dissolved and the Cr(III) deposited on the zinc surface (especially at 60°C). It also predetermines the formation of a thick, porous Chromate film with large cracks at 60°C. Its decorative and protective properties are rather poor. When Cr³⁺ ions are in the form of a complex with organic acid, the quantities of the zinc dissolved and the Cr(III) deposited on the zinc surface significantly decrease and thinner Chromate films with an even surface, good decorative appearance and high corrosion resistance are formed Decorative blue-bright Cr(VI)-free films with a slight iridescent tint, obtained in solution, containing Cr(III) nitrate (0.2), malonic acid (0.3) and Co(II) nitrate (0.02) mol dm^?3, at p H 1.6-2.0 at room temperature over 30–60 s, possess corrosion resistance (192–240 h in a salt spray chamber) similar to that of iridescent Chromate films, obtained in acidic Cr(VI) solution.     

Controlling data quality and reproducibility of a high-sensitivity immunoassay using isotachophoresis in a microchip

This report describes a method of controlling the sensitivity and reproducibility of a microchip-based immunoassay by using isotachophoresis to preconcentrate the antigen and antibody prior to binding. Gel electrophoresis separation is coupled to the preconcentration step to separate the immunocomplex products formed. The system employs a quartz-based LabChip that automates the metering, preconcentration, reaction, separation, and detection. The system also uses a handoff mechanism that switches the immunocomplex from the stacking mode to the separation mode. We show that the handoff timing affects the data quality and repeatability of the electropherograms, and we demonstrate an automatic handoff mechanism to precisely control the signal intensity and separation of peaks of interest. In so doing, the automatic handoff mechanism also improves the reproducibility of the assay. When applied to the homogeneous liquid-phase detection of alpha-fetoprotein, a common tumor marker, the system shows a greater than 200-fold stacking of specific analytes of interest.     

Novel (phenylethynyl)pyrene-LNA constructs for fluorescence SNP sensing in polymorphic nucleic acid targets

We describe fluorescent oligonucleotide probes labeled with novel (phenylethynyl)pyrene dyes attached to locked nucleic acids. Furthermore, we prove the utility of these probes for the effective detection of single-nucleotide polymorphisms in natural nucleic acids. High-affinity hybridization of the probes and excellent fluorescence responses to single-base mismatches in DNA/RNA targets are demonstrated in model dual-probe and doubly labeled probe formats. This stimulated us to develop two diagnostic systems for the homogeneous detection of a drug-resistance-causing mutation in HIV-1 protease cDNA and RNA gene fragments. Target sequences were obtained by analysis of 200 clinical samples from patients currently receiving anti-HIV/AIDS combination therapy at the Russian Federal AIDS Center. Using these fluorescent oligonucleotides, we were able to detect the target mutation despite all the challenges of the natural targets, that is, the presence of additional mutations, neighboring sequence variation, and low target concentration, which typically reduce binding and effectiveness of sensing by fluorescent oligonucleotides.     

Aqueous Surfactant Two‐Phase Systems for the Continuous Countercurrent Cloud Point Extraction

Aqueous nonionic surfactant solutions split into two phases if the temperature is increased beyond a certain temperature, the so‐called cloud point temperature. Presently many different types of nonionic surfactants are produced commercially, out of these numerous have been considered as potential solvent for the cloud point extraction. In this work the crucial thermophysical properties of nonionic surfactants are investigated to determine the potential of surfactant systems for extraction processes. Phase equilibria of the binary system Triton X‐114/water and the ternary system Triton X‐114/water/phenol were measured. Based on these data the cloud point extraction was implemented in a continuous stirred extraction column. It was found, that increasing temperature within the column reduces the loss of surfactant and leads to an increasing enrichment factor. This work demonstrates that surfactant/water systems represent a suitable alternative to conventional solvents and can effectively be processed in continuous extraction columns.     

Poly(ether imide)s containing cyano substituents and thin films made from them

A series of poly(ether imide)s containing functional cyano groups has been prepared by polycondensation reaction of 2,6‐bis(m‐aminophenoxy)benzonitrile with different bis(ether dianhydride)s, such as 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]isopropane dianhydride, 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)‐phenyl]hexafluoroisopropane dianhydride, 1,1‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]cyclohexane dianhydride, and 3,3‐bis[4‐(3,4‐dicarboxyphenoxy) phenyl]phthalide dianhydride. The polymers were soluble in polar aprotic solvents and even in less polar solvents and were processed into thin films by casting their solutions. The properties of the polymers, particularly the crosslinking of macromolecular chains through cyano groups, were studied by using dynamic mechanical analysis (DMA), thermal stability, glass transition, and solubility measurements. Also, the molecular relaxations were evidenced by DMA and dielectric spectroscopy. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Activated anionic ring-opening polymerization of ε-caprolactam with magnesium di(ε-caprolactamate) as initiator: effect of magnesium halides

The activated anionic ring-opening polymerization of ε-caprolactam initiated by 0.35 mol% of combined initiator, i.e., equimolar mixture of magnesium di(ε-caprolactamate) (CL₂Mg) with magnesium halides (MgCl₂, MgBr₂, and MgI₂) as well as of ε-caprolactam magnesium bromide (CLMgBr) in the presence of 0.35 mol% of N-acetyl-ε-caprolactam as an activator has been investigated in the temperature range 140–200 °C. It was found that the reaction rate increased while the apparent activation energy decreased in the following series: CL₂Mg/MgCl₂ < CL₂Mg/MgBr₂ ~ CLMgBr < CL₂Mg/MgI₂. In addition, the poly(ε-caprolactam)s prepared with CL₂Mg/MgX₂ (MgX₂ = MgCl₂, MgBr₂, and MgI₂) are characterized by slightly higher thermal stability than polymers obtained with CLMgBr as initiator. These observations were explained in terms of the coordination of Lewis acids (MgX₂, where X = Cl, Br, and I) with imide carbonyl of N-acyllactam end groups leading to the increase of their reactivity and stability.