Interactions of different polyphenols with bovine serum albumin using fluorescence quenching and molecular docking

Polyphenols are responsible for the major organoleptic characteristics of plant-derived foods and beverages. Here, we investigated the binding of several polyphenols to bovine serum albumin (BSA) at pH 7.5 and 25 °C: catechins [(−)-epigallocatechin-3-gallate, (−)-epigallocatechin, (−)-epicatechin-3-gallate], flavones (kaempferol, kaempferol-3-glucoside, quercetin, naringenin) and hydroxycinnamic acids (rosmarinic acid, caffeic acid, p-coumaric acid). Fluorescence emission spectrometry and molecular docking were applied to compare experimentally determined binding parameters with molecular modelling. Among these polyphenols, (−)-epicatechin-3-gallate showed the highest Stern–Volmer modified quenching constant, followed by (−)-epigallocatechin-3-gallate. Similarly, (−)-epicatechin-3-gallate had the highest effect on the Circular Dichroic spectrum of BSA, while the changes induced by other polyphenols were negligible. Molecular docking predicted high binding energies for (−)-epicatechin-3-gallate and (−)-epigallocatechin-3-gallate for the binding site on BSA near Trp213. Our data reveal that the polyphenol structures significantly affect the binding process: the binding affinity generally decreases with glycosylation and reduced numbers of hydroxyl groups on the second aromatic ring.     

Occurrence and risk assessment of mycotoxins,acrylamide, and furan in Latvian beer

This work reports data on the occurrence of nine mycotoxins and two food processing contaminants – acrylamide and furan – in a total of 100 beers produced in Latvia. Mycotoxins were detected by high-performance liquid chromatography (HPLC) coupled with time-of-flight mass spectrometry, acrylamide by HPLC coupled with quadrupole-Orbitrap mass spectrometry, and furan by headspace gas chromatography-mass spectrometry. The most frequently occurring mycotoxins were HT-2 and deoxynivalenol (DON), which were detected in 52% and 51% of the analysed samples. The highest content was observed for DON, reaching the maximum of 248 µg kg^?1. Furan was ubiquitous, and 74% of the samples contained acrylamide. In terms of the estimated exposure, the biggest potential risk was identified for HT-2 representing more than 11% of tolerable weekly intake. The margin of exposure approach indicated the exposure to furan through beer as significant, this parameter being close to the critical limit.     

Surface‐enhanced fluorescence of in situ synthesized polysilanesilver nanoparticles

To produce surface plasmons, silver nanoparticles are synthesized in situ in a pseudo‐template system based on polyhydrosilanes. Adsorption on the silver nanoparticle surface produces a thin layer of polymer with properties different from those of bulk polysilane. The metal‐adsorbed polymer layer serves as a spacer between the polysilane fluorophore and the plasmonic nanoparticle. This prevents quenching of the polysilane emission and leads to a strong surface‐enhanced fluorescence through coupling of surface plasmons having a resonance frequency that matches the emission frequency of the polymeric emitter. Copyright © 2012 Society of Chemical Industry     

Chain flexibility versus molecular entanglement response to rubbing deformation in designing poly(oxadiazole-naphthylimide)s as liquid crystal orientation layers

Four poly(oxadiazole-imide)s containing naphthalene rings, with different flexibility and molecular weight, are investigated with respect to their rheological properties to establish the optimal processing conditions from solution phase to film state for liquid crystal orientation purposes. The film uniformity and strength are determined by monitoring the flow behavior and chain entanglements. The solution rheological data are in agreement with film tensile testing, revealing that higher molecular weight favors chain entanglements and implicitly the film mechanical resistance. In order to analyze the suitability of these films as alignment layers their surface is patterned by rubbing with two types of velvet. Liquid crystal alignment of 4′-pentyl-4-biphenylcarbonitrile nematic is tested by polarized light microscopy. The resulting behavior is correlated with the polyimide malleability and characteristics of the textile fibers, namely their polarity, size, and mechanical features. The competitive effects between chain flexibility and entanglements, together with the interactions occurring between the polymer and velvet are analyzed in order to explain the surface regularity, which influences the uniformity of the liquid crystal alignment. The contrast between dark and bright states recorded on the liquid crystal cell indicates that some of these polynaphthalimides are promising candidates for liquid crystal display devices.     

pH control for enhanced reductive bioremediation of chlorinated solvent source zones

Enhanced reductive dehalogenation is an attractive treatment technology for in situ remediation of chlorinated solvent DNAPL source areas. Reductive dehalogenation is an acid-forming process with hydrochloric acid and also organic acids from fermentation of the electron donors typically building up in the source zone during remediation. This can lead to groundwater acidification thereby inhibiting the activity of dehalogenating microorganisms. Where the soils' natural buffering capacity is likely to be exceeded, the addition of an external source of alkalinity is needed to ensure sustained dehalogenation. To assist in the design of bioremediation systems, an abiotic geochemical model was developed to provide insight into the processes influencing the groundwater acidity as dehalogenation proceeds, and to predict the amount of bicarbonate required to maintain the pH at a suitable level for dehalogenating bacteria (i.e., > 6.5). The model accounts for the amount of chlorinated solvent degraded, site water chemistry, electron donor, alternative terminal electron-accepting processes, gas release and soil mineralogy. While calcite and iron oxides were shown to be the key minerals influencing the soil's buffering capacity, for the extensive dehalogenation likely to occur in a DNAPL source zone, significant bicarbonate addition may be necessary even in soils that are naturally well buffered. Results indicated that the bicarbonate requirement strongly depends on the electron donor used and availability of competing electron acceptors (e.g., sulfate, iron (III)). Based on understanding gained from this model, a simplified model was developed for calculating a preliminary design estimate of the bicarbonate addition required to control the pH for user-specified operating conditions.     

Morphology and surface properties of some siloxane–organic copolymers

BACKGROUND: It is well known that, due to their extremely low polarity, polysiloxanes are incompatible with almost any organic system. This incompatibility leads to phase separation in mixed siloxane–organic systems. RESULTS: Three siloxane–organic copolymers, poly[(5,5′‐methylene‐bis‐salicylaldehyde)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz1), poly[(2,5‐dihydroxy‐1,4‐benzoquinone)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz2) and poly[1,3‐bis(propylene)tetramethyldisiloxane diamide] (Pam), were prepared by the reaction of 1,3‐bis(3‐aminopropyl)tetramethyldisiloxane with appropriate organic partners (5,5′‐methylene‐bis‐salicylaldehyde, 2,5‐dihydroxy‐1,4‐benzoquinone and oxalyl chloride, respectively). The morphologies dictated by the incompatibility between siloxane and polar organic moieties were investigated using differential scanning calorimetry and scanning electron microscopy. The surface activity of the copolymers and water vapour sorption capacity were also measured. CONCLUSION: Even though the polar sequences are very short ones, the highly flexible siloxane‐containing sequence permits the self‐assembly of these into more or less polar domains. Such an organization influences the properties of the resulting materials, an important place being occupied by the surface properties. Copyright © 2009 Society of Chemical Industry     

Processing–formulation–performance relationships of polypropylene/short flax fiber composites

This work is a comprehensive study of the effect of extrusion process parameters and formulation on the properties of polypropylene (PP)/short flax fiber composites. The parameters that were varied during the twin‐screw extrusion process were screw configuration, revolutions per minute (rpm), extrusion temperature, and flow rate. The effect of the feeding zone location of cellulosic fiber was also considered. This study investigates the effect of the formulation, cellulosic fiber content, the presence of a coupling agent, and of a reactive additive on composite performance. The composites were characterized in terms of morphology and microstructure, fiber length, rheological, thermal, and mechanical properties. Sensibility to humidity and recyclability were also considered. When compared with as‐received PP, the tensile strength of injection‐molded parts increased with cellulosic content by up to 40 vol %, and the tensile modulus increased 3.5 times when a combination of coupling and reactive agents was used. Exposed to controlled humidity of 50% during 1 year, these composites exhibited a very low level of humidity uptake around 0.85 wt %. The processability of these materials using a cast film line and the mechanical properties of extruded sheets are also presented. Furthermore, these materials demonstrate a good recyclability using injection molding by keeping the integrality of their mechanical properties after five reprocessing cycles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41528.     

Relevance of the acid–base approach in prediction of adhesion properties in two‐component injection moulding

We demonstrate the use of innovative wetting method in prediction of the adhesion properties of biobased polymers for two‐component injection moulding, taking into account the acid–base surface properties of joined materials. The measurements were carried out in accordance with modified Berger method by calculation of the difference in shortened acidity parameter ΔD_short between hard and soft component. Correlation factors up to 0.99 were observed between ΔD_short and peel force. In comparison to results obtained by conventional wetting methods, high potential for the selection of components with high interface adhesion and for prediction of the functionality by the acid–base approach was demonstrated. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43048.     

New Octopus-like Phthalocyanines as Fullerene Receptors: Synthesis and Photophysical Investigation

Octopus-like zinc and magnesium phthalocyaninates bearing eight flexible benzylated diethylene glycol chains were synthesized and their interaction with fullerenes C₆₀ and C₇₀ was investigated by UV-Vis spectrophotometric titration, as well as by steady-state and time-resolved fluorescence spectroscopy in chloroform and toluene media. These measurements revealed a high affinity of receptors for C₆₀ and C₇₀, with selectivity to C₇₀: binding constants for C₇₀ are almost two times higher than for C₆₀. These results are interpreted by means of quantum-chemical calculations using the PM6-DH2 Hamiltonian. The binding constants also depend on both the nature of the metal ion in the receptor and the solvent. It is expected that the obtained molecules and supramolecular complexes can be used for further elaboration of optoelectronic donor-acceptor materials.