Blends of i‐PP and SBS. I. Influence of the in situ compatibilization on the morphology

This article concerns the in situ compatibilization of immiscible isotactic polypropylene/butadiene‐styrene‐butadiene triblock copolymer blends (i‐PP/SBS) by means of a reactive mixture. For this purpose, maleated PP (PP‐MAH) and SBS (SBS‐MAH) were used as functionalized polymers and 4,4′‐diaminediphenylmethane was used as a coupling agent between maleated polymers, resulting in a graft copolymer. Binary blends i‐PP/SBS, nonreactive ternary blends i‐PP/PP‐MAH/SBS, and reactive ternary blends i‐PP/PP‐MAH/SBS‐MAH with varying diamine and anhydride molar ratios were prepared. Torque measurements suggest a graft copolymerization during the melt blending for ternary reactive blends, but the extension of the grafting does not vary with the diamine and anhydride molar ratio, but with the elastomer concentration. The morphology of the blends was investigated by scanning electron microscopy. The morphology of binary and ternary nonreactive blends is similar, exhibiting elastomer domains disperse in the i‐PP matrix, whose sizes increase with elastomer concentration. On the other hand, the elastomer domain size in the ternary reactive blends is practically independent of the blends composition and of the diamine and anhydride molar ratio. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 847–855, 2002     

Microstructure and Mechanical Properties of Mullite–Silicon Carbide Composites

Mullite-SiC-whisker composites were prepared by powder processing using two commercial SiC whiskers. These composites were prepared by sintering rather than hot-pressing. A mulliteSlC-powder composite and a base line mallite material were also prepared for comparison with the two whisker composite materials. Fracture toughness measurements showed significant enhancement in only one of the whisker composite materials. The microstructure of the four materials was examined by scanning electron microscopy and transmission electron microscopy to assist in the explanation of the mechanical behavior of these composites. The examinations suggested that most of the toughening results from second-phase particles, with only limited toughening from effects associated with whiskers per se. In one case, higher toughness was partially associated with the formation of sialon phase by reaction with the whiskers and the furnace environment.     

New sesquiterpenes fromMaytenus species (Celastraceae). Taxonomic and chemotaxonomic considerations concerning chileanMaytenus

Three new dihydro--agarofuran sesquiterpenes from two species ofMaytenus were isolated and their structures were elucidated by means of¹H and¹³C NMR studies. The differences and similarities noted in the chemical content of the dihydro--agarofuran sesquiterpenes from the fourMaytenus species from Chile are in line with the taxonomic characterization of these species; their geographical distribution is also given.     

Valorization of Al slag in the production of green ceramic tiles: Effect of experimental conditions on microstructure and crystalline phase composition

This work reports the results of an investigation aimed at the development of sintered glass-ceramic tiles by the sinter-crystallization of mixtures composed of aluminum slag and reclaimed packaging glass. The thermal behaviors of mixtures incorporating 50 and 60 wt% Al slag were established by differential thermal analysis (DTA). Green compacts were sintered in a temperature range of 800°C-1050°C and then soaked for 10-60 minutes. The mineralogical characterizations of the sintered materials were obtained by X-ray diffraction (XRD). The achieved results indicated that the sintering of aluminum slag and packaging glass reclaimed led to a glass-ceramic material composed mainly of needle-like crystals of wollastonite (CaSiO₃). The bloating of samples during firing was evaluated according to a Cougny predictive diagram. After initial observations and according to bending strength characterizations, sintered tiles prepared from aluminum slag and glassy sand are appropriate for floor pavement and wall covering.     

Interactive visualization of medical volume models in mobile devices

Interactive visualization of volume models in standard mobile devices is a challenging present problem with increasing interest from new application fields like telemedicine. The complexity of present volume models in medical applications is continuously increasing, therefore increasing the gap between the available models and the rendering capabilities in low-end mobile clients. New and efficient rendering algorithms and interaction paradigms are required for these small platforms. In this paper, we propose a transfer function-aware compression and interaction scheme, for client-server architectures with visualization on standard mobile devices. The scheme is block-based, supporting adaptive ray-casting in the client. Our two-level ray-casting allows focusing on small details on targeted regions while keeping bounded memory requirements in the GPU of the client. Our approach includes a transfer function-aware compression scheme based on a local wavelet transformation, together with a bricking scheme that supports interactive inspection and levels of detail in the mobile device client. We also use a quantization technique that takes into account a perceptive metrics of the visual error. Our results show that we can have full interaction with high compression rates and with transmitted model sizes that can be of the order of a single photographic image.     

Parallel interval-based reasoning in medical knowledge-based system Clinaid

The paper continues a series of papers and a monograph [33], where we have described the conceptual structures as well as the basic architecture of a knowledge-based systemCunaid.     

RUSHES—an annotation and retrieval engine for multimedia semantic units

Multimedia analysis and reuse of raw un-edited audio visual content known as rushes is gaining acceptance by a large number of research labs and companies. A set of research projects are considering multimedia indexing, annotation, search and retrieval in the context of European funded research, but only the FP6 project RUSHES is focusing on automatic semantic annotation, indexing and retrieval of raw and un-edited audio-visual content. Even professional content creators and providers as well as home-users are dealing with this type of content and therefore novel technologies for semantic search and retrieval are required. In this paper, we present a summary of the most relevant achievements of the RUSHES project, focusing on specific approaches for automatic annotation as well as the main features of the final RUSHES search engine.     

Bayesian networks for enhancement of requirements engineering: a literature review

Requirements analysis is the software engineering stage that is closest to the users’ world. It also involves tasks that are knowledge intensive. Thus, the use of Bayesian networks (BNs) to model this knowledge would be a valuable aid. These probabilistic models could manage the imprecision and ambiguities usually present in requirements engineering (RE). In this work, we conduct a literature review focusing on where and how BNs are applied on subareas of RE in order to identify which gaps remain uncovered and which methods might engineers employ to incorporate this intelligent technique into their own requirements processes. The scarcity of identified studies (there are only 20) suggests that not all RE areas have been properly investigated in the literature. The evidence available for adopting BNs into RE is sufficiently mature yet the methods applied are not easily translatable to other topics. Nonetheless, there are enough studies supporting the applicability of synergistic cooperation between RE and BNs. This work provides a background for understanding the current state of research encompassing RE and BNs. Functional, non-functional and -ilities requirements artifacts are enhanced by the use of BNs. These models were obtained by interacting with experts or by learning from databases. The most common criticism from the point of view of BN experts is that the models lack validation, whereas requirements engineers point to the lack of a clear application method for BNs and the lack of tools for incorporating them as built-in help functions.     

The Great Lakes Region and Bulk Water Exports

Abstract

The article provides an overview of the latest developments in the debate concerning the bulk water export of Great Lakes water. It examines the policy and legal dimensions of this new debate. The policy dimension focuses on the public attention and concern, in Canada, regarding bulk water removals from the Great Lakes basin. This concern has triggered the new Canadian federal legislation banning water exports from the region (Bill C-15). Is this a sign that the Canadian government now embraces a water conservation ethic? Is its position in line with the recent recommendations on the issue of the International Joint Commission (IJC), the joint body created by the United States and Canada to manage its shared waters? The attempt by investors to export water from the Great Lakes basin raises issues regarding Canada's obligations under international and regional trade agreements, most notably the General Agreement on Tariffs and Trade (GATT) and the North American Free Trade Agreement (NAFTA). The article examines the provisions of those two trade agreements in the context of the water export debate in Canada and concludes that increased clarity on Canada/US transboundary water issues is required.