Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

HIV-1 and HIV-2 antibodies in pregnant women in the City of Maputo, Mozambique. A comparative study between 1982/1983 and 1990

The seroprevalence of HIV-1 and HIV-2 among pregnant women in Maputo, the capital of Mozambique, was compared between the years 1982/83, 1988 and 1990. None of the 432 serum samples collected in 1982/83 was positive for HIV antibodies whereas in 1988 the HIV-1 and HIV-2 seroprevalence was 0.4% (2/500) and 0.6% (3/500), respectively, and in 1990 0.6% (12/2014) and 0.2% (4/2014), respectively. These results indicate that HIV infection has been introduced recently in Maputo and is spreading at a slow rate among women.     

Bulk modification of styrene–butadiene–styrene triblock copolymer with maleic anhydride

The bulk modification of SBS rubber with maleic anhydride in a mixing chamber of a Haake rheomixer was studied. The effect of temperature, maleic anhydride, and benzoyl peroxide concentrations on the grafting efficiency was evaluated. High grafting efficiency was achieved when the ratio of peroxide and maleic anhydride concentration was high. On the other hand, on this condition high insoluble fraction was generated. The addition of a diamine, 4,4′‐diaminediphenylmethane to the reaction mixture minimizes the amount of insoluble polymer. However, the grafted MAH content also decreases. The graft copolymer was characterized by infrared spectroscopy and the grafting extension was determined by titration. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2953–2960, 2002; DOI 10.1002/app.10355     

Delay spread measurements for the digital cellular channel inToronto

The paper describes a set of measurements performed in the Toronto area, in order to assess the impact of multipath propagation on the performance of the TIA IS-54 digital standard. Five existing cells were systematically surveyed: two in downtown Toronto, two in the suburbs, and one in a suburban/rural area. A sweeping correlator apparatus with a 0.1 μs resolution and 910 MHz carrier frequency, and an omnidirectional antenna was used. In one of the cells, the measurements were repeated with a 60 degree beamwidth directional antenna. A fairly sophisticated thresholding technique was applied in order to reduce the impact of noise. Generally, the measurements with the omnidirectional antenna exhibit multipath propagation with considerably smaller excess delays than some reported, but are consistent with earlier results obtained in the U.S. and Europe. Sectorization was found to considerably reduce the multipath effects. Very large delay components appear to be due mostly to the combination of large transmitter-receiver distances and a large degree of shadowing, and could probably be avoided to a large extent by standard cellular engineering techniques. In view of these results, it seems that the long delay (high selectivity) problem has been somewhat overemphasized in the past, at least for areas like Toronto. Problems associated with short delays (flat fading), on the contrary, appear to have been underestimated in the case of dense urban environments     

Determining the Tensile Stress-Crack Opening Curve of Concrete by Inverse Analysis

The determination of the fundamental stress versus crack opening (σ-w) response of concrete under uniaxial tension is performed in this study through inverse analysis using data from notched beam tests. The procedure used for optimizing the parameters of the σ-w relation using the load versus crack mouth opening displacement response of the notched beam is described. Satisfactory comparisons have been obtained between the σ-w curves obtained through the inverse analysis and those directly measured in uniaxial tension tests. The use of weighting functions in the inverse analysis may be necessary when large crack widths are to be considered.     

Potential applications of poly(vinyl alcohol)‐congo red aqueous solutions and hydrogels as liquids for hydraulic fracturing

The authors report on the viscoelastic characterization of guar hydrogels obtained through complexation reactions with borax ions. These gels are compared with hydrogels obtained from poly(vinyl alcohol) of different degree of hydrolysis through complexation reactions with congo red. The effect of the degree of hydrolysis and both, the concentration of PVA and the concentration of congo red, on the viscoelastic properties of the hydrogels is analyzed. The potential use of the PVA‐based hydrogels as hydraulic fracturing liquids is discussed in relation to the commonly used fracturing liquid based on the guar–borax system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Genotoxic effect of Physalis angulata L. (Solanaceae) extract on human lymphocytes treated in vitro

Physalis angulata L (Solanaceae) is a medicinal plant from North of Brazil, whose different extracts and infusions are commonly used in the popular medicine for the treatment of malaria, asthma, hepatitis, dermatitis and rheumatism. However, the genotoxic effects of P. angulata on human cells is not well known. The main purpose of the present study was to evaluate the in vitro genotoxic effects of aqueous extract of P. angulata using the comet assay and the micronucleus assay in human lymphocytes provided from 6 healthy donors. Treatments with P. angulata extracts were performed in vitro in order to access the extent of DNA damage. The comet assay has shown that treatments with P. angulata at 0.5, 1.0, 2.0, 3.0 and 6.0 microg/mL in culture medium were genotoxic. Lymphocytes treated with P. angulata at the concentrations of 3.0 and 6.0 microg/mL in culture medium showed a statistically significant increase in the frequency of micronucleus (p<0.05), however, the cytokinesis blocked proliferation index (CBPI) was not decreased after P. angulata treatment. In conclusion, the present work demonstrated the genotoxic effects of P. angulata extract on human lymphocytes in vitro.     

Density of 1,1-dichloro-1-fluoroethane (HCFC 141b) as a function of temperature and pressure

The density of HCFC 141b has been measured at several temperatures between 260 and 320 K, Mid pressures up to 20 MPa, with a mechanical oscillator densimeter. The densimeter was calibrated with 2,2,4-trimethylpentane, whose density was obtained from a correlating cyuation with 0.3% uncertainty. The density data obtained for HCFC 14H) hits a reproducibility of 0.05% and an uncertainty of 0.3%. The data obtained were fitted to a Tait-type equation. which reproduced the experimental densities within 0.11 % and were compared with the data obtained in other works.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.