Morphology and breaking of latex particle deposits at a cylindrical collector in a microfluidic chamber

We report an analysis for the morphology and breaking behavior of deposits of spherical latex particles (1 and 3.6 μm in diameter) at a cylindrical collector in a microfluidic channel fabricated by soft-lithography. In-situ observation of particle deposition over a large range of flow rate conditions evidence the relationship between deposit morphology and mode of particle transport toward the collector. For low Pe?clet number (Pe), particle deposits are nearly uniform all over the collector surface except at the rear where particles do not attach. Upon increase of Pe, deposits gradually adopt a columnar morphology at the collector stagnation point. These results are qualitatively consistent with previously reported Monte Carlo simulations of deposits formation in stagnation point flow systems. However, these simulations fail to quantitatively predict the observed deposition at the rear of the collector for sufficiently high flow rate. Additional deposit breaking experiments together with numerical evaluations of particle flux around the collector suggest that such "anomalous" deposition at large Pe is significantly governed by concomitant detachment of deposited particles at the stagnation point and the presence of recirculation flow at the collector rear. Finally, kinetics of deposition are discussed in connection with particle size-dependence of deposit breaking features.     

Crystallite size distribution and the lattice distortions in highly γ-irradiated linear polyethylene

Crystallite size distributions and lattice distortions have been analysed for highly-irradiated linear polyethylene in the direction normal to 1 1 0 and 0 0 1 lattice planes through X-ray line profile analysis. It has been found that the lateral crystallite size is little affected irradiation greater than 1000 Mrad, whereas that in the chain direction decreases almost linearly with the dose of irradiation. A minor difference in the crystallite size between irradiation atmospheres, i.e. irradiation in air or in vacuum, has been disclosed at a very high dose of irradiation. The above degradation behaviour of crystallites and the change in lattice distortions have proved that radiation cross-links are mainly formed in the amorphous region near the lamellar surface of polyethylene.     

Strength enhancement of autocompleting medium and high carbon steels friction welded joints

An autocompleting friction welding method, which was developed by the authors, is to weld with using a rotating insert piece set between fixed workpieces. The conditions to enhance the strength of the welded joint in an autocompleting friction welding method which involves a rotating insert between the fixed workpieces were determined. The weld faying surface of the fixed specimen had a 10 mm diameter. When MCS joint was made at an insert thickness of 4 mm through a friction pressure of 36 MPa, it did not achieve 100% joint efficiency because the weld interfaces were not completely joined. MCS joint had 100% joint efficiency and fractured on the MCS base metal although the crack was generated at the weld interface, when that was made at an inner groove diameter of 11 mm with the bottom of the grooves for the insert piece (groove bottom thickness) of 0.9 mm or more through a friction pressure of 90 MPa. To obtain a joint with no cracks, MCS joint was made with an inner groove diameter of 12 mm at a friction pressure of 90 MPa. When the groove bottom thickness was 0.75 mm, MCS joint had 100% joint efficiency and the MCS base metal fracture with no crack at the weld interface. When HCS joint was made with an inner groove diameter of 11 mm at friction pressures of 90 and 150 MPa, it did not achieve 100% joint efficiency because the weld interfaces were not joined completely. The weld interfaces of HCS joint at a friction pressure of 120 MPa were completely joined although it did not achieve 100% joint efficiency. To improve the joint efficiency, HCS joint was made with an insert thickness of 5 mm, a groove bottom thickness of 0.64 mm, and an inner groove diameter of 12 mm with a friction pressure of 120 MPa. HCS joint had 100% joint efficiency and fractured on the HCS base metal with no crack at the weld interface.     

Adsorption of bovine serum albumin to a polymer brush prepared by atom-transfer radical polymerization in a porous inorganic membrane

Protein adsorption was performed by a polymer brush prepared by atom-transfer radical polymerization (ATRP) to a porous inorganic membrane. The porous inorganic membrane, Shirasu Porous Glass made from silica, was modified with a halogen-containing compound to bind the active species for the polymerization. Glycidyl methacrylate was polymerized from the halogen compound by ATRP for a prescribed time, and subsequently chemically modified. The progression of the chemical modification allowed the membrane to lower the phosphate-buffer flux of the porous membrane due to the attachment of the polymer brush. Bovine serum albumin (BSA), as a model protein, was adsorbed at 12 mg per gram of the membrane in permeating BSA solution through the polymer-brush-attached porous membrane.     

A cross-sectional analysis on relationships between maximum oxygen uptake and risk factors for cardiovascular diseases

We examined the relationships between maximum oxygen uptake (Vo2max) and cardiovascular risk factors including age (year), systolic blood pressure (mmHg), diastolic blood pressure (mmHg), serum total cholesterol level (mg/dl), serum high-density lipoprotein level (mg/dl), serum triglyceride level (mg/dl), blood glucose level (mg/dl), serum uric acid level (mg/dl), body fat (%bw), Body Mass Index (BMI), alcohol (points/day), cigarettes (/day), and physical activity (METs.exercise time/30 days). The alcohol point was defined as follows: beer 633ml = a glass of whiskey and water - sake 180ml = 1 point, and totaled at 30 days. The subjects of our study were 162 males (aged 40.6 +/- 13.1) and 133 females (aged 41.3 +/- 11.1) who underwent medical and physical examinations at the Fukui Industrial Health Center from April, 1991 to June, 1992. As a result of simple correlation analysis in males, Vo2max had significantly negative correlations with age (r = -0.223, p < 0.01), systolic blood pressure (r = -0.228, p < 0.01), diastolic blood pressure (r = -0.239, p < 0.01), or serum triglyceride level (r = -0.258, p < 0.001), serum uric acid level (p < 0.05), body fat (r = -0.230, p < 0.01), and BMI (r = -0.312, p < 0.001), and was positively correlated with physical activity (r = -0.249, p < 0.01). On the other hand, in females, age (r = -0.224, p < 0.01), systolic blood pressure (r = -0.222, p < 0.01), diastolic blood pressure (r = -0.267, p < 0.01), serum triglyceride level (r = -0.261, p < 0.001), body fat (r = -0.280, p < 0.01), and BMI (r = -302, p < 0.001), had significantly negative correlations with VO2max. However, partial correlations were tested after controlling body fat, BMI, cigarette, alcohol, physical activity, and age, none of the factors correlated with VO2max significantly. These findings suggest that the risk factors for cardiovascular diseases are related to VO2max, and the life style has an influence on these correlations. Thus, VO2max may be a comprehensive indicator for health promotion among the working population. Furthermore a longitudinal study is required to determine whether the increase in VO2max is related to the improvement in the risk of cardiovascular diseases.     

Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

Development of high performance Raney Cu-based catalysts for methanol synthesis from CO2 and H2

Catalytic hydrogenation of CO₂ into methanol has been investigated over Raney Cu-based catalysts. The Raney catalysts leached in NaOH/ZnO solutions showed high activities and selectivities for methanol synthesis. The deposition of Zn on the surface of Cu particles increased the surface area and the specific activity of Raney Cu–M. Raney Cu–Zr developed was significantly more active than a commercial catalyst.     

Accumulation of triosephosphate isomerase, with sequence homology to Beta amyloid peptides, in vessel walls of the newborn piglet hippocampus

We investigated whether beta-amyloid (Abeta)-like immunoreactivity was seen in the brains of newborn piglets. The immunoreactivity for Abeta(1-42) and Abeta(1-40) proteins, but not Abeta precursor protein, was present in CD68-positive perivascular cells of the hippocampus and in parts of the meninges. It was colocalized with immunoreactivity for receptor for advanced glycation end product and tumor necrosis factor-alpha. The protein with a molecular mass of 27 kDa, which was recognized by the Abeta antibodies, was identified as triosephosphate isomerase (TPI) with sequence homology to Abeta peptides by N-terminal amino acid sequencing, mass fingerprint analysis using matrix-associated laser desorption/ionization mass spectrometry, and Western blotting. Western blotting assay also revealed that detectable expression of Abeta proteins were not seen in the piglet brains. These findings indicate that TPI with sequence homology to Abeta peptides accumulates in perivascular cells of the microglia/macrophage lineage located around arterial vessels of the newborn piglet hippocampus.     

β-phase transformation and thermoelectric power in FeSi2 and Fe2Si5 based alloys containing small amounts of Cu

The effects of Cu addition on the β phase formation rate and the thermoelectric power in various FeSi₂ and Fe₂Si₅ based alloys was examined. The peritectoid reaction (a+→β) in FeSi₂ alloys was initially enhanced by the addition of Cu but it became slower for longer annealing times. The retained metallic ε was harmful for the thermoelectric power. The inherent thermoelectric properties of (FeSi₂)_99−XMn₁Cu_X (X=0–1.O at.%), (FeSi₂)_99−X Co₁Cu_X (X=0–1.0 at.%) alloys were attained after the elimination of ε. In the case of eutectoid reaction (→β+Si). Differential thermal analysis, X-ray diffraction and microscopic observation clearly confirmed that the eutectoid reaction rate was drastically enhanced by the addition of a small amount of Cu and its rate decreased with decreasing Cu content. The rate also depends on the annealing temperature and reached a maximum at about 1073 K for most alloys. The addition of only 0.1 at.% Cu was still very effective even in Mn or Co doped alloys. The thermoelectric power of these alloys increased very quickly with annealing time. Their final values decreased with Cu content and saturated at 0.2 at.% Cu. The value of the 0.1 at.% Cu added alloy was higher than that of both the conventional p- and a-type FeSi₂ based alloys. These results suggest that the Fe₂Si₅ alloys with a small amount of Cu may be attractive as new thermoelectric materials.