Annealing effect on temperature coefficient of resistivity in La1−xSrxMnO3 ceramics

We investigated annealing effects of La_1?xSr_xMnO₃ (x = 0–0.6) on electrical resistivity and the temperature coefficient of resistivity (TCR). The annealed samples’ resistivity was lower than those of non-annealed samples. For example, annealing changed the resistivity of x = 0.3 at 25 °C from 4.50 × 10^?5 to 3.71 × 10^?5 Ω m. Remarkable difference in TCR was observed after annealing, for x = 0.3, 0.45, and 0.5. For x = 0.3, the TCR after annealing was 4000 ppm/°C, which was 1250 ppm/°C greater than that before annealing. We investigated (1) crystal phase, (2) Mn average valence, (3) Mott insulator–metal transition temperature, and (4) microstructure. The microstructure was remarkably varied for annealed x = 0.3 and 0.5. The average grain size of the x = 0.3 increased from 1.60 up to 2.38 μm. Results show that annealing affects resistivity and TCR because of grain growth during annealing.     

A Novel Sodium Silicate Fluoride Solution and a H2 Gas Formed by a Reaction Between Si and an Aqueous Solution of NaOH and NaF

Oxidation of Si in an alkali solution has attracted much attention to produce hydrogen gas from Si wastes. It was found that hydrogen gas was generated from Si in NaOH and NaF solution with more than 10 times reaction rate than in the NaOH solution. The reaction by-product was a sodium silicate fluoride, Na _{x + z} Si _y O_{2 y + x /2}F _z solution, and it proved to transform to a glass foam by boiling. The Raman spectrum suggested that the silicon and oxygen atoms in the silicate anions were arranged in a sheet-like structure. This may affect the behavior to form the glass foam.     

Diffusional behavior of multi-arm star polymers by H pulsed field gradient spin-echo NMR method

The diffusional behavior of multi-arm star-shaped p(tBMA) was investigated in a concentration range from dilute to semidilute region with ¹H pulsed field gradient spin-echo NMR (PFGSE-NMR). An 142-arm star-shaped p(tBMA) showed two diffusional mode, which reflected the coexistence of liquid ordering phase and liquid phase near the ordering transition. On the other hand, for star-shaped p(tBMA) with 55 arms showed a single diffusional relaxation in all concentration ranges during observation time. In the semidilute region, the relationship between the diffusion coefficient against the polymer concentration was affected strongly not only the arm number but also liquid ordering structure.     

Direct Use of Benzylic Alcohols for Gold(III)‐Catalyzed S‐Benzylation of Mercaptobenzoic Acids in Water

We demonstrate the gold(III)‐catalyzed direct substitution of benzylic alcohols in water. These atom economic and environmentally benign protocols afford S‐benzylated products in moderate to excellent yields. In contrast, common Lewis or Brønsted acids as catalyst, and organic solvents such as dichloromethane or toluene were ineffective for the S‐benzylation of mercaptobenzoic acids. Water can be an attractive tool for new transition metal‐catalyzed reactions. A Hammett study for the rate constants with various substituted alcohols shows a good correlation (R²=0.97) between the log(k_X/k_H) and the σ⁺ value of the respective substituents. From the slope negative ρ values of 2.35 are obtained, suggesting that there is a build‐up of positive charge in the transition state. Our catalytic system can be performed with the use of only 2 mol% of gold(III) catalyst without any other additives in water, and scaled up to 10 mmol scale (85% isolated yield). Notably, the present method can accomplish the S‐benzylation of unprotected mercaptobenzoic acids, which is chemoselective and leaves the carboxyl group intact. Furthermore, the direct substitution of allylic and propargylic alcohols also proceeded smoothly in good yields.

     

Radiation grafting of α,β,β-trifluorostyrene onto poly(ethylene-tetrafluoroethylene) film by preirradiation method. II. Properties of cation-exchange membrane obtained by sulfonation and hydrolysis of the grafted film

A Study was made on certain properties of the cation-exchange membranes obtained by the preirradiation grafting of α,β,β-trifluorostyrene (TFS) noto poly(ethylene-tetrafluoroethylene) (ETFE), followed by sulfonation and hydrolysis of the grafted film. Swelling, water uptake, electric conductivity, and transport number of the membranes were measured as a function of ino-exchange capacity. Thermal and chemical stability were also investigated. These properties were found to be mainly dependent on ion-exchange capacity. The stable membrane properties were established due to a homogeneous ion-exchange group distribution in the membrane, as confirmed by x-ray imcroscopy analysis of the membrane cross sections. In addition, the membranes showed good electrochemical, thermal, and chemical properties, and were found to be scceptable for practical use as cation-exchange membranes.     

Biased distribution of the branched-chain fatty acids in ceramides of vernix caseosa

The compositions of ester- and amide-linked fatty acids from ceramides of human vernix caseosa were described with emphasis on the distribution of the branched-chain fatty acid (BCFA). Two novel ceramides were isolated from vernix caseosa in the course of this study: the acylated type of esterified α-OH-hydroxyacid/sphingosine ceramide (Cer[EAS]) and nonacylated type of non-OH fatty acid/hydroxysphingosine ceramide (Cer[NH]). Their chemical structures were identified by nuclear magnetic resonance and chemical procedure. The Cer[EAS] was an acylceramide and consisted of the highest concentrations of ester- and amide-linked BCFA (62 and 67%, respectively). The iso- or anteiso-branching structures of the aliphatic chains were confirmed by the mass spectra of their picolinyl or pyrrolidide derivatives. As a whole, amide-linked fatty acids of ceramides 1–7 and Cer[NH] were normal types of straight-chain fatty acids with or without α- or ω-hydroxylation. The BCFA concentrations of amide-linked fatty acids in these ceramides (ceramides 1–7 and Cer[NH]) were low and less than 10%. The BCFA thus occurred exclusively in a novel acylceramide of Cer[EAS] in the vernix caseosa.     

Identification of Sex Pheromones of Anadevidia peponis and Macdunnoughia confusa and Field Tests of Their Role in Reproductive Isolation of Closely Related Plusiinae Moths

Anadevidia peponis and Macdunnoughia confusa are defoliators of plants in the family Cucurbitaceae and Compositae, respectively, in Japan. GC-MS analyses of crude pheromone gland extracts treated with or without dimethyl disulfide indicated that females of A. peponis produced six monoene acetates and two monoene alcohols and that M. confusa females produced five monoene acetates. These components include (Z)-7-dodecenyl acetate as a major common constituent and three other acetates as minor common constituents. The minor constituents are quite different in blend composition. In addition, with (Z)-7-dodecenyl acetate, an indispensable component for male attraction is (Z)-5-decenyl acetate for A. peponis and (Z)-9-tetradecenyl acetate is essential for M. confusa. Field tests with synthetic lures showed synergistic effects of some other minor components and male attraction of three additional Plusiinae species, Macdunnoughia purissima, Ctenoplusia albostriata, and Chrysodeixis eriosoma, suggesting their reproductive isolation is based in part on pheromonal communication.     

Synthesis of Dense Lead Titanate Ceramics with Submicrometer Grains by Spark Plasma Sintering

Dense PbTiO₃ ceramics consisting of submicrometer-sized grains were prepared using the spark-plasma-sintering (SPS) method. Hydrothermally prepared PbTiO₃ (0.1 μm) was used as a starting powder. The powder was densified to ≳98% of the theoretical X-ray density by the SPS process. The average grain size of the spark-plasma-sintered ceramics (SPS ceramics) was ≲1 μm, even after sintering at 900°–1100°C, because of the short sintering period (1–3 min). The measured permittivity of the SPS ceramics showed almost no frequency dependence over the range 10¹–10⁶ Hz, mainly because pores were absent from the ceramics. The coercive field of the SPS ceramics was somewhat higher than that of conventionally sintered ceramics, which could be attributed to the small-grained microstructures of the SPS ceramics.     

Strengthening of Porous Alumina by Pulse Electric Current Sintering and Nanocomposite Processing

Porous Al₂O₃ and SiC–dispersed-Al₂O₃ (Al₂O₃/SiC) nanocomposites with improved mechanical properties were fabricated using pulse electric current sintering (PECS). Microstructures with fine grains and enhanced neck growth, as well as high fracture strength, could be achieved via PECS of Al₂O₃. The incorporation of fine SiC particles into an Al₂O₃ matrix significantly increased the fracture strength of porous Al₂O₃. Based on microstructural observations, it was revealed that the refinement of Al₂O₃ grains and neck growth occurred by PECS and nanocomposite processing.     

Role of Acetic Acid Added to the Reaction Media for the Enantio-differentiating Hydrogenation of Methyl Acetoacetate Over a Tartaric Acid-modified Nickel Catalyst

The role of acetic acid added to the reaction media for the enantio-differentiating hydrogenation of methyl acetoacetate over a (R,R)-tartaric acid-in-situ-modified nickel catalyst was studied from the viewpoint of the hydrogenation rate during repeated runs. The hydrogenation of methyl acetoacetate on the “enantio-differentiating sites” of a tartaric acid-modified nickel catalyst was specifically accelerated by the acetic acid added to the reaction media to increase the enantio-differentiating ability of the catalyst. In order to increase the enantio-differentiating ability, the addition of acetic acid to the reaction media was required in each run during the repeated use of the catalyst.