a-SiC:H/SiO2 Laminated Polarization Splitter for the Wavelength Region Longer Than 1.3 μm Prepared by Plasma-Enhanced Chemical Vapor Deposition

A laminated polarization splitter for the wavelength region longer than 1.3 μm is fabricated for the first time. It is composed of a-SiC:H/SiO₂ alternative multilayers prepared by plasma-enhanced chemical vapor deposition. Splitting behavior is also verified experimentally. It has low absorption loss even for the wavelength region around λ = 1.3 μm because the band-gap energy of a-Sic is larger than that of a-Si. The measured splitting angle is 13.8°, which is 2.4 times larger than the 5.7° splitting angle of rutile. The absorption loss of the multilayer is reduced to 1 × 10^-3 dB/μm at λ = 1.3 μm. The magnitude of the residual stress is 9.45 × 10⁸ dyn/cm², which is about one-third of that prepared by the rf bias sputtering equipment which is used for another project of our group. The deposition rate of SiO₂, is increased to 135 nm/min, which is 27 times larger than that prepared by the sputtering equipment.     

A radio-telemetry system with a shape memory alloy microelectrode for neural recording of freely moving insects

A radio frequency (RF) telemetry system with a shape memory alloy microelectrode was designed and fabricated. The total size and weight are 15 mm x 8 mm and 0.1 g, respectively. Since the telemeter is small and light enough to be loaded on a small animal such as an insect, the system can be used for the neural recording of a freely moving insect. The RF-telemeter can transmit signals by frequency modulation transmission at 80-90 MHz. The transmitted signals can be received up to about 16 meters away from the telemeter with a high signal-to-noise ratio. The neural activity can be detected without attenuation by using an instrumentation amplifier with its input impedance set to 2 Mohms at 1 kHz. The telemeter was loaded on a cockroach and the neural activity during a free-walk was successfully measured through this telemetry system.     

Colored Fluorescent Silk Made by Transgenic Silkworms

Silk is a protein fiber used to weave fabrics and as a biomaterial in medical applications. Recently, genetically modified silks have been produced from transgenic silkworms. In the present study, transgenic silkworms for the mass production of three colors of fluorescent silks, (green, red, and orange) are generated using a vector originating from the fibroin H chain gene and a classical breeding method. The suitability of the recombinant silks for making fabrics is investigated by harvesting large amounts of the cocoons, obtained from rearing over 20 thousand silkworms. The application of low temperature and a weakly alkaline solution for cooking and reeling enables the production of silk fiber without loss of color. The maximum strain tolerated and Young's modulus of the fluorescent silks are similar to those of ordinary silk, although the maximum stress value of the recombinant silk is slightly lower than that of the control. Fabrics with fluorescent color are demonstrated using the recombinant silk, with the color persisting for over two years. The results indicate that large amounts of genetically modified silk can be made by transgenic silkworms, and the silk is applicable as functional silk fiber for making fabrics and for use in medical applications.     

Research on corrugated multi‐louvered fins under dehumidification

To enhance automotive evaporator wet‐fin performances, the main task is to promote the draining of condensed water. An accurate and convenient apparatus estimating the fin performances has been developed. Through the measurement of corrugated multi‐louvered fin performances and the visualization of condensed water draining by this apparatus, it was clarified that fin geometries, surface coating, and evaporator installation strongly contributed to the efficiency of draining and fin performances. © 2001 Scripta Technica, Heat Trans Asian Res, 30(5): 383–393, 2001     

The corrosion behaviour of SS 41 steel in formic and acetic acids

The corrosion behaviour of SS 41 steel in formic acid and acetic acid was investigated by measuring the corrosion weight loss, the polarization curve and the impedance at the steel-solution interface. It was found that the corrosion rates of the steel in formic acid and acetic acid are markedly dependent on acid concentration and temperature. The corrosion rates in acetic acid are smaller than those in formic acid. The corrosion potential E_corr against pH of formic acid and acetic acid solutions shows a linear relationship.     

Reliability consideration on a compound redundant system with repair

This paper considers a standby-redundant system consisting of 2 systems, in which one is main and the other is its standby-redundant system. These systems also consist of 2 subsystems connected in series.A feature of this system is that the system has 2 switching devices connecting subsystems, in addition to one connecting main and standby systems, in order to utilize surviving subsystem. In this consideration it is assumed that all the units are repairable.We shall obtain the system reliability, the mean time to system failure, the steady state availability, and examine numerically the effects of this model to the usual one without particular switching devices.     

Reliability and maintainability of a multicomponent series-parallel system with simultaneous failure and repair priorities

This paper considers a system consisting of two subsystems connected in series with a single repair facility. One subsystem is K-out-of-N:G system consisting of N identical units, while the other consists of M different units connected in series. The life-times of the active units depend on each other in having simultaneous failure of all the operating units and repair times are distributed quite generally. The system breaks down if more than (N?K+1) units in the parallel group are simultaneously in the failed states or if any failure occures in the series group. The availability and reliability function of the system are obtained simultaneously. Explict expressions for the steady state availability of the system and the mean time to the first system failure are obtained.     

Gel permeation chromatography of polyoxymethylene

Gel permeation chromatography of polyoxymethylene has been studied using N,N-dimethylformamide as the solvent. Polyoxymethylene samples used here are a copolymer of tetraoxane with 1,3-dioxolane and a commercial polyoxymethylene whose molecular weight distributions are moderately broad. Their intrinsic viscosities [η] range from 1.4 to 2.8 dl/g. Factors affecting chromatograms are discussed, and the operating conditions were determined by using the analytical scale GPC. On the basis of these operating conditions, the molecular weight fractionation of polyoxymethylene was carried out by using the preparative scale GPC. It was found that polyoxymethylene can be effectively fractionated to give seven to ten fractions each of them containing the fractionated polymer ranging in weight from 0.2 to 8 mg when 40 mg polymer sample was used for a run of the measurement. The fractionated polymers were also found to have a narrow molecular weight distribution within a single peak, and their M_w/M_n values decrease with increasing molecular weight.     

High-throughput immunophenotyping by surface plasmon resonance imaging

Cell binding assays on antibody arrays permit the rapid immunophenotyping of living cells. The throughput of the analysis, however, is still limited due to our inability to perform parallel and quantitative detection of cells captured on the array. To address this limitation, we employed here an imaging technique based on surface plasmon resonance (SPR). SPR has been frequently used to monitor capture of proteins on antibody microarrays, while few cases were reported for capture of cells. Antibody arrays were prepared through the photopatterning of an alkanethiol monolayer on a gold-evaporated glass plate and the subsequent immobilization of various antibodies onto 4-9 separate spots created by photopatterning. A glass slip was mounted onto the array with a thin spacer to construct a parallel-plate chamber. Leukemia cells were injected into the chamber to conduct a binding assay, while refractive index changes at the vicinity of the array surface were monitored by SPR imaging. We observed that SPR signals were intensified on specific antibody spots but not on nonspecific spots. Confocal laser scanning microscopy revealed that the observed SPR signals were attributed to cell deformations caused by multivalent interactions with immobilized antibody, which effectively elevated the refractive index of a medium phase within an evanescent field. This effect could be suitably utilized to monitor quantitatively cell binding to multiple spots from a heterogeneous cell population.